$00_WT-4_En.book Page 115 Friday, August 10, 2007 2:02 PM 4 6 Go to the [System and Maintenance] > [Administrative Tools] control panel and open the [Internet Information Services] console. Creating an ftp Server / Windows XP 5 Enter an IP address and sub-net mask for the ftp server and click [OK]. Right-click [Default FTP Site] and select [Properties] from the menu that appears.
$00_WT-4_En.book Page 116 Friday, August 10, 2007 2:02 PM 7 Creating an ftp Server / Windows XP 8 Select the IP address entered in Step 4 and enter a [TCP Port] number. The port number is normally 21. Open the [Home Directory] tab and select [a directory located on this computer]. The root directory for images uploaded to the ftp server is listed in the [Local Path] text box; choose a folder and select [Read], [Write], and [Log visits]. Click [OK] to close the properties dialog.
$00_WT-4_En.book Page 117 Friday, August 10, 2007 2:02 PM Macintosh Open [System Preferences] and click [Network]. 2 Select [AirPort] from the [Show] menu. 3 Creating an ftp Server / Macintosh 1 Select [Manually] from the [Configure IPv4] menu and enter an IP address and sub-net mask. Make a note of this address. It will be needed to set up the WT-4.
$00_WT-4_En.book Page 118 Friday, August 10, 2007 2:02 PM Creating an ftp Server / Macintosh 4 Click [Show All] to return to the System Preferences dialog. 5 Click [Sharing]. 6 Select [Services] and enable [FTP Access]. This completes ftp server setup. Proceed to “Copying Network Profiles to the Camera” (pg.119).
$00_WT-4_En.book Page 119 Friday, August 10, 2007 2:02 PM Ad Hoc Networks 1 Connect the UC-E4 as shown below. 2 Turn the camera on. Power switch MMY 3 Copying Network Profiles to the Camera / Ad Hoc Networks Copying Network Profiles to the Camera Turn the computer on and start the WT-4 Setup Utility. • Windows: Double-click the [WT-4 Setup Utility] icon on the desktop • Macintosh: Click the [WT-4WirelessSetup] icon in the Dock.
$00_WT-4_En.book Page 120 Friday, August 10, 2007 2:02 PM Copying Network Profiles to the Camera / Ad Hoc Networks 4 The dialog shown below will be displayed; click [Next]. 5 Select [Add/Edit profiles] and click [Next].
$00_WT-4_En.book Page 121 Friday, August 10, 2007 2:02 PM Select [Add new profile] and click [Next]. 7 Enter the following information and click [Next]: • Profile name: Enter a name of up to 16 characters. • Profile type: Choose [FTP Server]. • Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks.
$00_WT-4_En.book Page 122 Friday, August 10, 2007 2:02 PM 8 Select [Manual setup] and click [Next].
$00_WT-4_En.book Page 123 Friday, August 10, 2007 2:02 PM 9 Enter the following information and click [Next]. Number of characters (ASCII) Number of characters (hex) WEP (64-bit) 5 10 WEP (128-bit) 13 26 Copying Network Profiles to the Camera / Ad Hoc Networks • Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically. • Network type: Select [Ad hoc]. • Channel: Select a communication channel.
$00_WT-4_En.
$00_WT-4_En.book Page 125 Friday, August 10, 2007 2:02 PM 10 Enter the following information and click [Next]. Operating the WT-4 for FTP Copying Network Profiles to the Camera / Ad Hoc Networks • Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180).
$00_WT-4_En.book Page 126 Friday, August 10, 2007 2:02 PM 11 Enter ftp settings and click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks • FTP server: Enter the URL or IP address of the ftp server. • FTP server port: Enter the port number for the ftp server. The default port is 21. • FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory.
$00_WT-4_En.book Page 127 Friday, August 10, 2007 2:02 PM 12 Confirm that settings are correct and click [Next]. Copying Network Profiles to the Camera / Ad Hoc Networks 13 Select [Finish wizard] and click [Next].
$00_WT-4_En.book Page 128 Friday, August 10, 2007 2:02 PM 14 Turn the camera off and disconnect the USB cable. Copying Network Profiles to the Camera / Ad Hoc Networks UMMY The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140).
$00_WT-4_En.book Page 129 Friday, August 10, 2007 2:02 PM Infrastructure Networks Connect the UC-E4 as shown below. 2 Turn the camera on. Power switch MMY 3 Turn the computer on and start the WT-4 Setup Utility. • Windows: Double-click the [WT-4 Setup Utility] icon on the desktop • Macintosh: Click the [WT-4WirelessSetup] icon in the Dock.
$00_WT-4_En.book Page 130 Friday, August 10, 2007 2:02 PM Copying Network Profiles to the Camera / Infrastructure Networks 4 The dialog shown below will be displayed; click [Next]. 5 Select [Add/Edit profile] and click [Next].
$00_WT-4_En.book Page 131 Friday, August 10, 2007 2:02 PM Select [Add new profile] and click [Next]. 7 Enter the following information and click [Next]: • Profile name: Enter a name of up to 16 characters. • Profile type: Choose [FTP Server]. • Interface type: Choose [Wireless & Ethernet] for networks that include wireless, or [Ethernet only] for Ethernet-only networks.
$00_WT-4_En.book Page 132 Friday, August 10, 2007 2:02 PM 8 Select [Manual setup] and click [Next].
$00_WT-4_En.book Page 133 Friday, August 10, 2007 2:02 PM A [Automatic setup] cannot be selected in the following cases: • When editing a preset network • When using a third party network adapter • When the computer network is set to a static IP address • When the OS is Windows XP SP1 or Mac OSX Operating the WT-4 for FTP Copying Network Profiles to the Camera / Infrastructure Networks “Automatic Setup” Choose [Automatic setup (recommended)] when using a new network for the first time.
$00_WT-4_En.book Page 134 Friday, August 10, 2007 2:02 PM 9 Enter the following information and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks • Network name (SSID): Enter a network name or choose from a list of existing networks. Do not change the name if it is supplied automatically. • Network type: Select [Infrastructure (access point)]. • Authentication: Choose the authentication used on the network.
$00_WT-4_En.
$00_WT-4_En.book Page 136 Friday, August 10, 2007 2:02 PM 10 Enter the following information and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks • Obtain IP address automatically: Select this option if the network is configured to supply IP addresses automatically. If the network does not include a DHCP server, addresses will be supplied by Auto IP (pg.180). • IP address: If the network is configured for manual IP addressing, enter an IP address for the WT-4.
$00_WT-4_En.book Page 137 Friday, August 10, 2007 2:02 PM 11 Enter ftp settings and click [Next]. Operating the WT-4 for FTP Copying Network Profiles to the Camera / Infrastructure Networks • FTP server: Enter the URL or IP address of the ftp server. • FTP server port: Enter the port number for the ftp server. The default port is 21. • FTP path: Choose the folder to which pictures will be uploaded. If no path is specified, pictures will be uploaded to the home directory.
$00_WT-4_En.book Page 138 Friday, August 10, 2007 2:02 PM 12 Confirm that settings are correct and click [Next]. Copying Network Profiles to the Camera / Infrastructure Networks 13 Select [Finish wizard] and click [Next].
$00_WT-4_En.book Page 139 Friday, August 10, 2007 2:02 PM 14 Turn the camera off and disconnect the USB cable. The network profile has now been copied to the camera. Proceed to “Connecting to the FTP Server” (pg.140).
