User Manual

ManualsBrandsSilex Technology ManualsElectronicsSX-10WAG

 



Oct  5, 2007



1.  Hardware

specifications/Compliance・・・・・・・・・・・・・・・・・・・・2

2．System Requirements・・・・・・・・・・・・・・・・・・・・・・・・・・・4

3．Setup ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・4



SX-10WAG Users Manual

SX- 10WAG Users Manual



si l ex t echnol ogy, l nc.



１



Summary of content (4 pages)

PAGE 1
SX- 10WAG User s Manual Oct 5, 2007 SX-10WAG Users Manual 1. Hardware specifications/Compliance・・・・・・・・・・・・・・・・・・・・2 2．System Requirements・・・・・・・・・・・・・・・・・・・・・・・・・・・4 3．Setup ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・4 si l ex t echnol ogy, l nc.
PAGE 2
SX- 10WAG User s Manual 1 Hardware specifications/Compliance FCC ID：N6C-SX10WAG NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
SX- 10WAG User s Manual - The device for the band 5150-5250MHz is only for indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems. - The maximum antenna gain permitted (5250-5350MHz devices) to comply with the EIRP limit. - Users should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250-5350MHz and 5650-5850MHz and these radars could cause interference and/or damage to LELAN devices.
PAGE 4
SX- 10WAG Users s Manual Manual G User 2 System Requirements (for the install) PC containing: . 32-bit CardBus slot (or Desktop PC with PC Card-PCI adapter) . Mini PCI . 32 MB memory or greater . 300 MHz processor or higher When this module is installed in the host product, you must include a "Contain FCC ID : N6C-SX10WAG" in the label of the host product. 3 Setup It uses Driver and a utility of Atheros Communications.