User Manual

ManualsBrandsSilex Technology ManualsElectronicsSX-10WAG

152

Mode / Choose Profile

Menu Guide

Mode

Choose from [Transfer mode] (pg.70),

[Thumbnail select mode] (pg.79), [PC mode]

(pg.90), and [Print mode] (pg.97). Selecting

any of these options displays a profile list

showing the connections available in the

selected mode.

Choose Profile

Selecting an option from the [Mode] menu

displays a profile list showing the

connections available in the selected mode.

The WT-4 can store a total of up to nine host,

server, and printer profiles. To delete a

profile, highlight it in the profile list and press

the O button. To edit an ftp server profile,

highlight the profile and press the N button (pg.153).

To view profile information, highlight the desired profile and press

the L (?) button. The following information will be displayed.

D Using the Menus

If the shutter-release button on the camera is pressed while menus are

displayed, the monitor will turn off and any changes to the current profile

will be lost. Select [Monitor off delay] in [Custom menu] and configure a

longer power off timing.

Device (PC, ftp server,

or printer)

Interface type

(pg.51, pg.62, pg.121,

pg.131, pg.177)

Profile name

(pg.51, pg.62, pg.121,

pg.131, pg.176)

SSID

(pg.54, pg.65, pg.123,

pg.134, pg.177)

$00_WT-4_En.book Page 152 Friday, August 10, 2007 2:02 PM

Summary of content (13 pages)

PAGE 1
$00_WT-4_En.book Page 152 Friday, August 10, 2007 2:02 PM Mode Mode / Choose Profile Choose from [Transfer mode] (pg.70), [Thumbnail select mode] (pg.79), [PC mode] (pg.90), and [Print mode] (pg.97). Selecting any of these options displays a profile list showing the connections available in the selected mode. Choose Profile Selecting an option from the [Mode] menu displays a profile list showing the connections available in the selected mode.
PAGE 2
$00_WT-4_En.book Page 153 Friday, August 10, 2007 2:02 PM FTP Registration (for Connection to ftp Servers Only) Editing ftp Profiles To edit an ftp server profile, highlight it in the profile list in transfer mode and press the N button. Choose the settings to be edited from [Wireless], [TCP/IP], and [FTP], or select [Done] to save changes and return to the profile list. Only ftp server profiles can be edited in this fashion; to edit other profiles, use the WT-4 Setup Utility.
PAGE 3
$00_WT-4_En.book Page 154 Friday, August 10, 2007 2:02 PM ❏ Wireless Mode / Editing ftp Profiles / Wireless This option contains settings for connection to a wireless network and is only displayed if the interface type for the selected profile is [Wireless & Ethernet]. The wireless menu has two pages of options; to scroll between pages, press the multi selector up or down. Wireless Menu, Page 1/2 SSID: A BSS- or ESS-ID is required for connection to a wireless LAN adapter or access point.
PAGE 4
$00_WT-4_En.book Page 155 Friday, August 10, 2007 2:02 PM Channel * Choose channel. 2 Return to wireless menu (1/2). * Not required if [Infrastructure] is selected for [Communication mode]. Mode / Editing ftp Profiles / Wireless 1 Authentication: Choose the type of authentication used by the computer or access point. The camera supports WPA-PSK, WPA2-PSK, open system, and shared key authentication. WPA-PSK and WPA2-PSK are available only in infrastructure mode.
PAGE 5
$00_WT-4_En.book Page 156 Friday, August 10, 2007 2:02 PM Wireless Menu, Page 2/2 Encryption Mode / Editing ftp Profiles / Wireless 1 Highlight encryption method. A Encryption The type of encryption available depends on the option selected for [Authentication] (pp.54, 65): • Open: none, WEP • Shared: WEP • WPA-PSK: TKIP, AES • WPA2-PSK: AES 2 3 4 Return to wireless menu (2/2). Highlight encryption key. Skip Steps 3–5 if [No encryption] was selected in Steps 1–2.
PAGE 6
$00_WT-4_En.book Page 157 Friday, August 10, 2007 2:02 PM 5 Return to wireless menu (2/2). Mode / Editing ftp Profiles / Wireless Key index: In infrastructure networks that use WEP encryption, choose the key index used by the host or access point. 1 Choose index. 2 Return to wireless menu (1/2).
PAGE 7
$00_WT-4_En.book Page 158 Friday, August 10, 2007 2:02 PM ❏ TCP/IP Mode / Editing ftp Profiles / TCP/IP Adjust TCP/IP settings as described on the following pages. The TCP/IP menu has two pages of options; to scroll between pages, press the multi selector up or down. TCP/IP Menu, Page 1/2 Obtain automatically: Highlight this option and press the multi selector right to toggle it on (M) or off.
PAGE 8
$00_WT-4_En.book Page 159 Friday, August 10, 2007 2:02 PM 4 Exit to TCP/IP menu (1/2). If sub-net mask is required, proceed to Step 5. Highlight [Mask]. 6 Enter edit mode. 7 Choose sub-net mask. 8 Exit to TCP/IP menu (1/2).
PAGE 9
$00_WT-4_En.book Page 160 Friday, August 10, 2007 2:02 PM TCP/IP Menu, Page 2/2 Mode / Editing ftp Profiles / TCP/IP Use gateway: Highlight this option and press the multi selector right to toggle it on (M) or off. If the network requires a gateway address, turn this option on and enter the address supplied by the network administrator as described below. 1 Highlight [Address]. 2 Enter edit mode. 3 4 Press multi selector left or right to select, up or down to change. Return to TCP/IP menu (2/2).
PAGE 10
$00_WT-4_En.book Page 161 Friday, August 10, 2007 2:02 PM 1 Highlight [Address]. 2 Enter edit mode. 3 4 Mode / Editing ftp Profiles / TCP/IP Enable DNS: Highlight this option and press the multi selector right to toggle it on (M) or off. If a Domain Name Server (DNS) exists on the network, turn this option on and enter the address supplied by the network administrator as described below. Press multi selector left or right to select, up or down to change. Return to TCP/IP menu (2/2).
PAGE 11
$00_WT-4_En.book Page 162 Friday, August 10, 2007 2:02 PM ❏ FTP Mode / Editing ftp Profiles / FTP Adjust ftp settings as described on the following pages. The ftp menu has three pages of options; to scroll between pages, press the multi selector up or down. FTP Menu, Page 1/3 Server 1 Highlight [Address]. 2 Display text entry dialog. 3 4 Enter server address (required; pg.153). Return to ftp menu (1/3).
PAGE 12
$00_WT-4_En.book Page 163 Friday, August 10, 2007 2:02 PM Highlight [Folder]. 6 Display text entry dialog. 7 Mode / Editing ftp Profiles / FTP 5 Enter destination folder name (pg.153). 8 Return to ftp menu (1/3). 9 Highlight [Port].
PAGE 13
$00_WT-4_En.book Page 164 Friday, August 10, 2007 2:02 PM 10 Enter edit mode. Mode / Editing ftp Profiles / FTP 11 Press multi selector left or right to select, up or down to change. 12 Return to ftp menu (1/3). PASV mode: Highlight this option and press the multi selector right to toggle PASV mode on (M) or off. Turn this option off to use normal (PORT) mode. Be sure the server supports PASV mode before turning this option on.