SCXMIT11 418Mhz Consolidated Transmitter Series Installation Instructions Revision IR Date 01/12/2016 www.silentcall.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document REVISION HISTORY Revision # Initiated By Revision Date Approved by Approval date. Reason Retain this record in front of this manual. Upon receipt of this revision, insert and remove pages accordingly. Then enter on this page, the revision number, issue date, insertion date, and your initials.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document TABLE OF CONTENTS SECTION 1: INTRODUCTION .......................................................................................................... 4 1.1 PURPOSE:....................................................................................................................................... 4 SECTION 2: SYSTEM DESCRIPTION ............................................................................................. 4 2.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document SECTION 1: INTRODUCTION 1.1 PURPOSE: This document contains information relative to the installation and operation characteristics of the Silent Call Medallion Series SCXMIT11 Consolidated Transmitter configurations. SECTION 2: SYSTEM DESCRIPTION 2.1 KEY FEATURES: The Silent Call SCXMIT11Transmitter Medallion Series is a configurable 418Mhz Transmitter to be used in conjunction with the Medallion Series Receivers.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document 2.3 REGLATORY INFORMATION NOTICE: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. This Device Complies With Industry Canada License-Exempt RSS Standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document Adjust antenna for best results Transmission range with a Silent Call Medallion Series transmitter is about 500 feet. SECTION 3: CONFIGURED TRANSMITTER INSTRUCTIONS 3.1 DB1-MC INSTALLATION: 1. Locate your doorbell chime unit and remove the cover. 2. Inside the chime unit, locate the terminal block with three terminals marked FRONT, REAR and TRANS. 3.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document 3.3 FA4-MC INSTALLATION: Please contact a licensed fire alarm installer for installation and working with this product. Improper installation can damage your fire alarm and/or prevent proper operation of the fire alarm. Technical support is available at (800) 572-5227. The FA4-MC in conjunction with a Silent Call Medallion Series receiver is considered an Supplementary Visible Notification Appliance.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document Technical Support For technical support on this or any other Silent Call product, please feel free to contact us. You can reach us by phone at 800572-5227 (voice or TTY) or by Email at support@silentcall.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document SCXMIT11 418Mhz Consolidé Émetteur Série Instructions D'Installation Traduction Français TABLE DES MATIÈRES SECTION 1: INTRODUCTION.................................................................................................................................. 10 1.1 OBJECTIF: ......................................................................................................................................................................
SCXMIT11 418Mhz Consolidated Transmitter Installation Document SECTION 1: INTRODUCTION 1.1 OBJECTIF: Ce document contient des informations relatives à des caractéristiques installation et l'utilisation des configurations de silencieux appeler médaillon série SCXMIT11 Consolidated émetteur. SECTION 2: DESCRIPTION DU SYSTÈME 2.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document 2.3 AVIS D'INFORMATION REGLATORY: CET APPAREIL EST CONFORME À LA PARTIE 15 DES RÈGLES FCC. Cet Appareil Est Conforme Avec Industrie Canada Exemptes De Licence RSS Ou Les Normes.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document SECTION 3: INSTRUCTIONS DE L'ÉMETTEUR CONFIGURÉ 3.1 INSTALLATION DE DB1-MC: 1. Repérez votre carillon sonnette et enlever le couvercle. 2. À l'intérieur de l'unité de carillon, placer la plaque à bornes avec trois bornes avant, arrière et TRANS. 3. Les connexions requièrent secondaire transformateur tension entre 12VAC à 24VAC avec bouton de sonnette de porte enfoncé. 4. Desserrez les deux vis mais ne pas déconnecter les câbles attachés. 5.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document 3.3 INSTALLATION DE FA4-MC: Pour l'installation et l'utilisation de ce produit, veuillez communiquer avec un installateur d'alarme incendie sous licence. Une installation incorrecte peut endommager votre alarme incendie et/ou empêcher le bon fonctionnement de l'alarme. incendie. Le support technique est disponible au (800) 572-5227.
SCXMIT11 418Mhz Consolidated Transmitter Installation Document Support Technique Pour le support technique à ce sujet ou tout autre produit d'appel silencieux, s'il vous plaît n'hésitez pas à nous contacter. Vous pouvez nous joindre par téléphone au 800-572-5227 (voix ou TTY), ou par courriel à support@silentcall.com LES CHANGEMENTS OU MODIFICATIONS NON EXPRESSÉMENT APPROUVÉS PAR LE FABRICANT PEUVENT ANNULER AUTORISATION VOTRE D'UTILISER L'ÉQUIPEMENT.