LINX Box RF Receiver 418MHz GW1000-SS Installation and Operation Manual Revision 1 Date 04/12/2016 SilentCall Communications 5095 Williams Lake Road Waterford, MI 48329 Silent Call Communications www.silentcall.
REVISION HISTORY Revision # Initiated By Revision Date IR AW 02/23/2016 Reviewed by ECN #. Reason Initial Release Retain this record in front of this manual. Upon receipt of this revision, insert and remove pages accordingly. Then enter on this page, the revision number, issue date, insertion date, and your initials. Silent Call Communications www.silentcall.
KEY FEATURES: The Silent Call Gateway 1000 is a secondary alerting device for the Signature Series Alerting Receivers. Current E-mail address, Internet access, and available Ethernet connection is required. The GW1000 sends alert text messages to all the registered phones associated with the activated Linx Box. Registration is completed online specific to each customers WEB application and profile. GW1000 is powered using the supplied AC/DC wall Adapter. GW1000 features 3 Color coded LEDs for unit status.
GW1000-SS INITIAL SETUP: The Silent Call Model GW1000-SS is packaged with the following items. • 110VAC Power Adapter supplying 5 vdc@1.0 amp • GW1000 Linx Box • GW1000-SS Quick Start Manual • RJ45 Ethernet Cable 1. Remove and Inspect each of the items supplied from Silent Call to ensure no damage or missing items listed above. 2. Take Supplied Ethernet cable and connect one end to the GW1000 and other to existing Open Modem or Router Ethernet connection. 3.
. Verify Screen appears as below. Enter a Current Email address, a Personalized Password, and Pin in applicable data fields. Be sure to save a copy of your password for future reference. Entering in Mobile Phone Number or Gateway Code is optional at this time. 6. Select “REGISTER” once all the fields are completed. 7. Screen will display registration submitted. You will also receive an email verifying you have successfully registered to Silent Call Web Site.
8. Selecting link or Exiting and reentering the Web Main page will bring you to the Home Login Page. 9. Enter Email and Password. Select “Confirm” or “Login”. Screen will appear as below. Example shows Gateway Code not entered at Step 5. 10. Select” User Profile” Tab Bottom Right of Screen. 11. User Profile screen will be displayed with your information. You can Change Display Name as desired.
12. Select “Modify” to confirm Phone number. 13. Enter Mobile Phone Number if not entered in step 5. SAVE CHANGES. 14. Select “Confirm” after changes are saved. 15. Select “Confirm” Mobile Phone. 16. You will soon receive an “Activation Code” Text message on Primary Phone. 17. Enter Code exactly as Text message is displayed on received text message. Select “Confirm” 18. You will see a message appear on Top of Web page confirming you have successfully registered primary phone.
19. SAVE CHANGES. Green Check next to phone number. 20. Select “Manage Gateways” Tab. Top Right of Web Page. 21. Gateway code will be displayed if entered in step 8. Select “Modify Gateways”. 22.
23. Enter Gateway Code “LB Code” and Name to be associated with unit registering. Select “Register” when complete. 24. Screen will Show registered GW1000-SS. Displaying Name and Mac address. Select “Edit” if changes are required. Select Register Gateway to add additional GW1000-SS units to your account. 25. Exit” Register Gateway “page to view My Gateways page. Gateway Status will show “Connected” when operating properly.
26. Select “Alerts”. Check all applicable alerts you wish to receive. SAVE CHANGES. 27. Additional Phones can be added to the Gateway at any time by selecting Gateway “Alerts” then “Phones and Accounts”. Enter Name, Phone number, and Alerts. Select “Apply” 28. Select “Confirm Number”. 29. Select “Generate”. Enter Activation code received on additional phone. Select “Confirm”. 30. Confirm Page displayed shows Green Check Status for each additional phone.
31. Exit Alerts page to view My Gateways page. 32. The GW1000 is now ready to be “PAIRED” with your Silent Call Signature series Transmitters. 33. Pairing of the GW1000 can be done on the WEB page by selecting “PAIR” or manually by momentarily pushing the pair button located on top of the Linx Box. 34. Identify each of the Silent Call Signature Series transmitters and Codes you wish to PAIR with the GW1000.
39. Paired Transmitters will be displayed in the Paired Transmitter Fields. Once Transmitters are paired Refresh browser to update fields. “F5” Properly locating and final testing the paired GW1000 will ensure proper operation with all Selected Silent Call transmitters. This unit is to be used a secondary Alerting device. GW1000 is susceptible to Internet, Main power, or Telephone subscription problems.
Technical Support For technical support on this or any other Silent Call product, please feel free to contact us. You can reach us by phone at 800572-5227 (voice or TTY) or by Email at support@silentcall.com CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Limited Warranty Your transmitter is warranted to be free of defects in material and workmanship for five years from the date of initial purchase.