Installation Manual

ManualsBrandsSIIG ManualsCables & InterconnectsSIIG USB 2.0 4-Port Extender (JU-EX0111-S1)

USB 2.0 4-Port Extender

Quick Installation Guide

04-0877A

Introduction

The USB 2.0 4-Port Extender, using inexpensive CATx

cabling, extends the distance to four USB devices up to 80

meters.

Features and Benefits

• Extends USB distance up to 80 meters via CATx

cable

• Connect up to 4 USB devices

• Supports high-speed USB 2.0 devices and

backward support for USB 1.1 devices

• Supports USB 2.0 data transfer rate up to

480Mb/s

• The extender requires no additional driver

installation

• Supports hot-swap & Plug-and-Play

System Requirement

• Notebook or Desktop PC with an available USB

port

Summary of content (8 pages)

PAGE 1
USB 2.0 4-Port Extender Quick Installation Guide Introduction The USB 2.0 4-Port Extender, using inexpensive CATx cabling, extends the distance to four USB devices up to 80 meters. Features and Benefits • Extends USB distance up to 80 meters via CATx cable • Connect up to 4 USB devices • Supports high-speed USB 2.0 devices and backward support for USB 1.1 devices • Supports USB 2.
PAGE 2
Package Contents • • • • • • USB Extender 4-Port Extender-Transmitter USB Extender 4-Port Extender- Receiver USB 2.
PAGE 3
DC 5V USB Input EQ Figure 2: Rear Panel • • • DC 5V: Connects to the included Power Adapter. Note: This connection is optional and only needed when your USB devices are not detected by the Receiver. USB Input: Connects to an available USB 2.0 port on your computer using the included USB 2.
PAGE 4
• Power LED: On when the Transmitter is powered on DC 5V OUTPUT UTP/STP EQ Figure 4: Rear Panel • • • DC 5V: Connects to the included 5V DC power adapter OUTPUT UTP/STP: Plug your CATx cable into this port, up to 80 meters maximum EQ: Press the EQ button to adjust for the length of the CATx cable Hardware Installation 1. 2. 3. 4 Connect your CATx cable to the OUTPUT UTP/ STP port of the Transmitter and the Receiver. Plug your USB device(s) into the Receiver's Type A USB port.
PAGE 5
4. Plug the power adapter to the Receiver's 5V DC power jack. The extender is ready for use. Transmission Distance Adjustment Push the EQ button on both Transmitter and Receiver to adjust for the length of the CATx cable.
PAGE 6
Application Desktop or notebook PC USB cable Transmitter CATx cable Receiver USB cable USB device (printer, HDD docking, USB capture cable, etc) Figure 6 6
PAGE 7
Technical Support and Warranty QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 3-year manufacturer warranty with this product.
PAGE 8
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.