USB 2.0 to DVI/VGA Pro Installation Guide Introduction The USB 2.0 to DVI/VGA Pro adds DVI or VGA port to your USB enabled system. Key Features and Benefits • • • Quickly adds a monitor, LCD or projector to your USB 2.0 enabled system Resolution (max): 1080p and WUXGA 1920 x 1200 Connects up to 6 adapters in one system System Requirements • • • • 04-0671D Desktop or notebook PC with a single core 1.2 GHz CPU or faster An available USB 2.0/3.
Package Contents • • • • USB 2.0 to DVI/VGA Pro DVI-I to VGA adapter USB Cable (Type A to B) Driver CD & installation guide Layout USB cable connector DVI port Figure 1: Layout Windows Software Installation Make sure the proper driver for your graphics card is installed, the USB 2.0 to DVI/VGA Pro is not designed to work with Windows' Standard VGA Graphics Adapter driver. Important: Do not plug the USB 2.0 to DVI/VGA Pro into the computer until instructed to do so. 1. Insert the driver CD.
2. 3. 4. 5. 6. 7. 8. For Windows 10 / 8/ 7: Run Setup.exe. For Windows Vista / XP: Choose the folder according to your OS and run Setup.exe. Click Yes at the User Account Control window. Skip this step if not prompted. DisplayLink Graphics window appears, and select Install at "system check" stage. At "First connect" stage, connect your second monitor to the USB 2.0 to DVI/VGA Pro and turn it on. Connect the USB 2.0 to DVI/VGA Pro to the computer using the included USB cable.
2. Manage, then click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, then click Device Manager. Double click USB Display Adapters, a AN2240D3 should be displayed. Uninstalling the Adapter Driver Windows 10 / 8 / 7 1. 2. 3. 4. 5. Double click Control Panel on desktop, or click Start, Control Panel. Click Programs, then click Programs and Features. Select DisplayLink Graphics, then click Uninstall. Click Yes, Yes, then click OK.
4. Click Allow, then click Yes to complete. Windows XP 1. 2. 3. 4. Click Start, Control Panel. Double click Add/Remove Programs. Select DisplayLink Graphics, click Remove, then click Yes. Click Yes to complete uninstalling the driver. Windows Display Utility After successful driver installation a AN2240D3 Adapter utility icon will appear in the taskbar. This display utility allows you to quickly change the viewing modes and resolutions. Access the utility by clicking the icon.
• • • • • 6 mirrored display by 90 degrees. Upside-Down - Rotates the extended or mirrored display by 180 degrees. Extend to: Right - Extends the display to the right of the main display. Left - Extends the display to the left of the main display. Above - Extends the display above of the main display. Below - Extends the display below the main display. Extend (default): This mode extends your desktop for easy viewing of multiple windows.
• Fit to TV: Adjust the size of the Windows desktop when the Windows desktop does not completely appear on the TV. Using Windows Display Properties (WDP) Note: Not all the WDP functions are available in Windows Vista. Instead of using the AN2240D3 utility, you can use the embedded Windows Display Properties (WDP) to do the basic setting. WDP allows you to rotate, duplicate or extend screens as well as modify screen resolution.
• • • • 8 Display: Use the drop down list to select a display to be configured. Resolution: Use the drop down list and user the slider to choose a resolution. Orientation: Landscape - Sets the display to landscape view. Portrait - Sets the display to portrait mode. Landscape (flipped) - Sets the display to upside down landscape mode. Portrait (flipped) - Sets the display to upside down landscape mode. Multiple displays: Duplicates these displays - Reproduces the main display on the second display.
• • Make this my main display: Check the box and you will make your USB 2.0 to DVI/ VGA Pro the main display adapter in the system. Make sure the secondary monitor is selected before choosing this option. Display Positions: To move the position of a display, click and hold the display you wish to move then drag it to the desired position. The display will be highlighted with a blue border while you are moving the display to its new position. Mac OS Driver Installation 1. 2. 3. 4.
5. 6. 7. 8. 9. 10. 11. At the DisplayLink Installer, double click DisplayLink Software Installer.pkg. At the Introduction, click Continue for one to two times. At the License, click Continue, and Agree. At the Select Destination, click Continue. Skip this step if not prompted. At the Installation Type, click Change Install Location if you want to change the default saving folder; otherwise, click Install and Continue Installation. Type in Name and Password, click OK or Install Software.
To Uninstall the Driver 1. 2. 3. 4. 5. 6. Insert the driver CD, then double click Driver CD icon on the Desktop. Choose the Mac folder according to your OS. Doublclick DisplayLink_Mac_OS_....dmg. Double click DisplayLink Software Uninstaller, then click Uninstall. Type in your system password, click OK. Click Restart to complete the uninstallation.
Mac Display Utility Click the utility icon in the taskbar to change the modes or resolutions, or double click System Preference, click the Display icon, then select the Arrangement pane. Setting the Display Resolutions Select an available resolution from the Display Preferences window. The resolutions available depend on both the USB 2.0 to DVI/VGA Pro enabled product and the capabilities of the connected display.
Setting the Display to Mirror/Extend Mode Check Mirror Displays box on the Arrangement pane to enable the mirror mode. Uncheck the box to set the display to extend mode. Change the main display by simply dragging the white menu bar between the displays. Mirror display box Figure 3 Changing the Main Display As Figure 3, you can change the main display by moving the Menu Bar between displays. Changing the main display affects where new windows appear and the position of the Dock.
Q2: Why won't my video play on Media Player if I move it over to the extended desktop? A2: Check that you have moved the Media Player window completely over to the extended screen. Q3: There are lines running horizontally up and down my screen or the screen is distorted. A3: This is due to a low or unsupported refresh rate setting. You can change this in Display Properties/Settings/Advanced/Monitor. Make sure you select the USB 2.
Technical Support and Warranty QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 5-year manufacturer warranty with this product.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.
