Pr Features + Two 16C650 ART serial ports support data rate up to 250Kbps +» Compliant with PCI Express 2.
System Requirements * PCI Express-enabled system with an available PCI Express slot » Windows® 10 / 8.
Power connector If the serial port(s) requires power output, connect the system power source to board's power connector, otherwise leave it unconnected. However, most serial devices do not require additional power through the serial port. Refer to your serial device's manual for more information. Please put the red line and triangle at the same side.
Hardware Installation Since the design of computer cases and motherboards vary, refer to your computer's reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer's case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges.
Driver Installation 1. Find the system version folder which one are your system using. Select “Sextuplet” to install the driver Follow the Installation steps to complete the driver Installation Use Device Manager to verify successful installation. Changing COM Port Number If your serial device works properly, do nat change this setting. 1. From the Device Manager window double click Ports {COM & SCULPT, then double click the Cuber Serial serial port you want to change, Click Settings tab.
Dear Valued Customer (JUST WANTED YOU TO KNOW) WE REALLY APPRECIATE YOUR PURCHASE ~thank you~ Support For more info or tech support: July, 2019 Copyright © 2013 by SING, Inc.