User Manual

ManualsBrandsSIIG ManualsComputer Accessories & Peripherals1080p HDMI Extender Splitter Over CAT5e/CAT6 Ethernet - Up to 40m (130ft) - 1x4 Port Extender w/ IR Extension and EDID - (1 in 4 Out) - HDMI Signal Distribution Amplifier Extender

1. Power Jack: Connect with DC 5V/3A

power adapter

2. EDID switch:

Set the EDID information for

source device

3. IR OUT: Connect with IR Blaster cable

4. RJ-45: Link to the RX via a Cat5e/6 cable

5. HDMI IN: Connect with HDMI source

6. LINK LED:

Turns red when powered. Turns

blue when an HDMI signal detected

7. Reset: Press to reset the HDMI extender

when it doesn’t work properly

Features

• Supports HDMI 1.3, HDCP 1.4

• Supports 1080p@60Hz

• Extend over a Cat5e/6 cable up to 40m

• Support IR frequence 20-60kHz

• Support EDID setting function

Package contents

• HDMI HDbitT Extender TX

• HDMI HDbitT Extender RX x4

• Power adapter DC 5V/3A

• Power adapter DC 5V/1A x4

• IR Blaster cable

• IR Receiver cable x4

• Screw kit

• Quick Start Guide

Layout

Transmitter

Support

For more info or tech support

http://www.siig.com/support

uly

Dear Valued Customer

(Just WANTED YOU TO KNOW)

WE REALLY

APPRECIATE

YOUR PURCHASE

EDID

"1" represents Switch UP

"0" represents Switch down

SW1 SW2 SW3 EDID Mode

0 0 0 720P@50Hz 2CH

1 0 0 720P@50Hz 7.1CH

0 1 0 1080i@60Hz 2CH

1 1 0 1080i@60Hz 7.1CH

0 0 1 1080p@60Hz 2CH

1 0 1 1080p@60Hz 7.1CH

1 1 1 Default 720P@50Hz 2CH

Summary of content (2 pages)

PAGE 1
Features Dear Valued Customer (Just WANTED YOU TO KNOW) WE REALLY APPRECIATE YOUR PURCHASE • • • • • Supports HDMI 1.3, HDCP 1.4 Supports 1080p@60Hz Extend over a Cat5e/6 cable up to 40m Support IR frequence 20-60kHz Support EDID setting function Support July, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.
PAGE 2
Receiver 1. 2. 3. 4. 5. 6. Reset: Press to reset the HDMI extender when it doesn’t work properly RJ45: Link to the TX via a Cat5e/6 cable LINK LED:Blinks when powered.