Full HD Multi-Channel Expandable Wireless HDMI Gateway Extender Installation Guide P/N: CE-H22T11-S1/CE-H22U11-S1 04-1097A 1
Introduction The Full HD Multi-Channel Expandable Wireless HDMI Gateway Extender connects up to 3 HDMI sources and transmits HDMI A/V signals wirelessly up to 165ft with 1080p resolution.
Package Contents • • • • • • Full HD Multi-Channel Expandable Wireless HDMI Gateway Extender IR blaster extension cable IR receiver extension cable Power adapters (x2) Remote control (with one battery) Installation Guide Specifications Wireless Technology 5 GHz Signal Type HDMI HDMI Version HDMI 1.3 compatible HDCP Version HDCP 1.
Product Layout IR window Connection indicator Switch button (Source) Input channel indicator Input indicator Switch button (Channel) Figure 1: Transmitter (TX) - front side • • • • • • 4 Switch button (Source): Press to switch between HDMI sources (HDMI sources 1, 2 or 3) Input channel indicator: Indicates the input channel selected.
HDMI out IR Out Reset button Antenna port Power jack HDMI In Figure 2: Transmitter (TX) - rear side • • • • • • Antenna port: Attach the included Antenna here HDMI Output (optional): Connects to an HDMI display for local monitoring of the extended HDMI display IR out: Plug the IR Blaster extension cable here Reset button: Press when the unit doesn't work properly Power jack: Connects to the included power adapter HDMI In: Connect to your HDMI sources with HDMI cables (cables not included) 5
IR window Switch button (Source) Input channel indicator Switch button (Channel) Data transmission indicator Connection indicator Figure 3: Receiver (RX) - front side • • • • • • 6 Switch button (Source): Press to switch between HDMI sources (HDMI sources 1, 2 or 3) Input channel indicator: Indicates the input channel selected.
Antenna port Power jack HDMI Out IR in Reset button Figure 4: Receiver (RX) - rear side • • • • • Antenna port: Attach the included Antenna here Power jack: Connects to the included power adapter HDMI Out: Connects to your HDMI display with a HDMI cable (cable not included) IR in: Plug the IR Receiver extension cable here Reset button: Press when the unit doesn't work properly 7
IR Remote Control Previous Next Input Select Button Figure 5: IR Remote Control • Previous (CH-): Select the previous input source • Next (CH+): Select the next input source • Input Select Button (1-3): Select input source 1, 2, 3 8
IR Extension cables (20-60Hz Frequency Range) The IR Extension feature allows you to control your HDMI source device from a remote location. Figure 6: IR blaster extension cable (IR OUT) • • Figure 7: IR receiver extension cable (IR IN) IR blaster extension cable (IR OUT): Plugs into the Transmitter's IR Out socket.
Hardware Installation 1. Power off all devices including your HDMI source and display. 2. Attach the included antennas to the TX and RX. 3. Connect your HDMI sources to the Transmitter's HDMI IN connectors. 4. Optional: Connect the IR Blaster extension cable to the Transmitter's IR Out. Face the eye towards your HDMI device's IR window. This connection is needed only if you need to control your HDMI source from the remote location. 5.
Application The Full HD Multi-Channel Expandable Wireless HDMI Gateway Extender enables you to connect up to 3 HDMI sources and easily switch between multiple devices. It extends HDMI signals wirelessly up to 165ft. Note: The transmission distance will vary depending on building layout, electronic interference, other environmental conditions, and may be much less than the maximum.
Multicast ability: Broadcasts and independent streams video content to two remotely located displays simultaneously*.
Notice • • • • • • • Wireless signals transmitted through walls, glass, brick or other solid objects will cause signal loss and decrease the transmission distance It's recommended that the distance between two receivers not less than 3 meters Keep the unit in a well ventilated environment to prevent it from overheating DO NOT expose the unit to rain, moisture, or liquids DO NOT place anything on the unit DO NOT open the housing, doing so will void the warranty and may cause personal injury due to electroni
Q: A: 14 There is no output on the display: 1) Make sure the HDMI devices are well connected to the Transmitter (TX). 2) Use different HDMI cables. 3) If still not working, connect the HDMI device to the TV directly to see if there's a signal.
Technical Support and Warranty QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 2-year manufacturer warranty with this product.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.