ASSEMBLY INSTRUCTIONS Style # CU1442 Curio NOTE TO CUSTOMERS: e For ease and speed of assembly we recommend that before you commence each step of the assembly that yon identify all the parts required to complete that step. ® We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled. * For the protection of your furniture we recommend that the product is placed on protected surfaces during assembly to prevent any damage.
To use a cam lock: (Please read below instructions before assembling) Diagram B 1. Insert cam screw into hole as shown in diagram A , Make sure not to insert the cam screw: Too deep as shown in figure B as this will cause the cam screw to be misaligned and unable to interlock properly. Also avoid inserting the cam screw too close to the surface of the hole as shown in figure C, as this will cause the cam lock to be too loose, and not interlock properly. 2. Connect the panels together. ARROW SIGN 3.
Part List Al Quantity |A2 Quantity | A3 Quantity | Ad Quantity Top Panel Side Panel Bottom Panel Middle Shelf AS Quantity 46 Quantity | g7 Quantity | Ag Quantity Leg Door (Left) Door (right) Back Panel A9 Quantity | A10 Quantity Adjustable Shelf Middle Leg .
STEP 1 Assemble Legs (AS) and Middle Leg (A 10) to the bottom of Bottom Panel (A3). B1 == PCs B2 «= PCs B3 @ docs STEP Assemble Side Panel (A2) to Middle Shelf (A4) using and ‘Wood Dowels (B1).
STEP 3 B1 z= PCs B2 PCs B3 §& PCs Assemble Side Panels (A2) to Bottom Panel (A3) using Wood Dowels (B1), Cam-Bolts (B2) and Cam-Locks (B3). B1 = PCs B2 ae PCs B3 §@ PCs STEP 4 Assemble Top Panel (Al) to Side Panels (A2) using Wood Dowels (B1), Cam-Bolts (B2) and Cam-Locks (B3).
STEP 5 B4 om. PCs Attach Back Panel (A8) to the back of this unit using Screws (B4). STEP 6 B5 &> PCs 1. Insert Shelf Supports (B5) into holes on Side Panels (A2). 2. Place Shelves (A9) onto Shelf Supports (B5).
STEP 7 Insert Door Panel (F) to Top Panel (A1) and Bottom Panel (A2). Note: Please slightly incline the door so that the groove on top of door can catch the glide on top panel. STEP § Repeat Step 8 to assemble the other dooryard.