Installation Sheet

ManualsBrandsSignature Hardware ManualsPlumbingPasaia Wall Mounted Clawfoot Tub Filler Faucet - Includes Telephone Style Hand Shower

ALLISTER/PASAIA TUB FAUCET INSTALLATION

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

faucet, plumbing, bathtub, ﬂoor, or for personal injury

during installation.

Observe all local plumbing and building codes.

Unpack and inspect the faucet for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

Ensure that you have gathered all the required

materials that are needed for the installation.

For these instructions, it is assumed that the old

faucet has been completely removed and any

necessary repairs or modiﬁcations to the water

supply have been completed.

TOOLS AND MATERIALS:

Plumbers

Tape

Thread

Sealant

Adjustable

Wrench

Phillips

Screwdriver

1Allister/Pasaia Tub Faucet Installation Instructions

904563, 909055, 911179, 917402,

920046, 925491

SKU(s):

Summary of content (6 pages)

PAGE 1
SKU(s): 904563, 909055, 911179, 917402, 920046, 925491 ALLISTER/PASAIA TUB FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, bathtub, ﬂoor, or for personal injury during installation. TOOLS AND MATERIALS: Plumbers Tape Thread Sealant Phillips Screwdriver Observe all local plumbing and building codes.
PAGE 2
ALLISTER/PASAIA TUB FAUCET INSTALLATION DECK-MOUNT INSTALLATION 1. Attach the provided threaded shanks into the base of each deck coupler, as shown. Apply thread sealant or plumber’s tape to the threads before attaching. Tighten ﬁrmly. 3. Attach the faucet body to the installed deck couplers. Apply thread sealant or plumber’s tape to the threads before tightening. Tighten ﬁrmly using an adjustable wrench, then ﬁnish tightening the lock nuts, securing the faucet to the deck.
PAGE 3
ALLISTER/PASAIA TUB FAUCET INSTALLATION 5. Remove the nut and rubber cone washer from the faucet body, located behind the spout. Discard these pieces, as they will not be used. Attach the hand shower cradle by threading it onto this outlet. Ensure that the rubber washer is inserted into the base of the cradle before attaching. Tighten ﬁrmly using an adjustable wrench. 7. Using the provided ﬂexible hose, attach the hand shower to its outlet on the hand shower cradle.
PAGE 4
ALLISTER/PASAIA TUB FAUCET INSTALLATION TUB WALL INSTALLATION 9. To complete the installation. connect the water supply lines (not included) to the faucet’s inlets. 1. Remove the nuts, rubber washers, and lock nuts from each of the faucet’s threaded shanks. Lock Nut Rubber Washer Hot Water Line Cold Water Line Nut 10. Once installation is complete, turn the faucet on for appoximately 60 seconds to check for any leaks, and to ensure that hot and cold water are running appropriately.
PAGE 5
ALLISTER/PASAIA TUB FAUCET INSTALLATION 3. Attach the spout to the faucet body by threading it into its outlet, as shown. Apply thread sealant or plumber’s tape to the threads before attaching. 5. Attach the hand shower head to the hand shower handle. Hand tighten ﬁrmly. Apply thread sealant or plumber’s tape 4. Remove the nut and rubber cone washer from the faucet body, located behind the spout. Discard these pieces, as they will not be used.
PAGE 6
ALLISTER/PASAIA TUB FAUCET INSTALLATION 7. To attach the faucet handles, ﬁrst remove the screw from each valve stem using a phillip’s screwdriver. Slide one handle onto each stem, then use the screws to secure. 9. Once installation is complete, turn the faucet on for appoximately 60 seconds to check for any leaks, and to ensure that hot and cold water are running appropriately. Divert water ﬂow to the hand shower for testing as well. 60 sec 8. To complete the installation.