Installation Sheet

1Heavy Duty Tub Supply Installation Instructions
HEAVY DUTY FREESTANDING TUB SUPPLY
INSTALLATION INSTRUCTIONS
Before you begin, read the installation instructions below. Observe all local plumbing and building codes.
For the following installation instructions for your new tub supplies it is assumed that the water supply lines are in place
underneath the oor and are directly accessible for installation.
Unpack and inspect for any shipping damages. If you nd any damages, do not install. Contact Customer Service at
1-866-855-2284. If you need assistance while installing your tub supplies, call our Customer Service number.
We recommend consulting a professional if you are unfamiliar with installing bathroom xtures and plumbing. Signature
Hardware accepts no liability for any damages to the oor, walls, plumbing or personal injury during installation.
Riser location will vary depending on the width of the faucet centers and tub rim. We recommend that the spout of your
faucet extend out approximately 3-5" over the interior of the tub.
TOOLS AND MATERIALS:
Adjustable Wrench Damp Cloth
INSTALLATION
1. Thread the bell anges (F), lock nuts (G), and rubber
washers (H) onto the lower riser pipes (E). Insert the lower
riser pipes into the installation holes in the nished oor.
Note: Apply the supplied thread sealant to all threaded
connections. Wipe away any excess sealant with a damp
cloth.
2. Thread the metal washers (I), and locknuts (J) onto the lower
riser pipes via the under the oor access space. Connect the
lower riser pipes to the main water supply with the rubber
washers (K) and NPT adapters (L).
3. Above the oor, apply thread sealant to the riser threads
and connect the shutoff valves (D). Wipe away any excess
sealant with a damp cloth.
4. Slide the slip nuts (B) up the upper riser pipes (C).
5. Wrap plumber's tape around the threads on the bottom of the
upper riser pipes and thread into the shutoff valves.
6. Place the remaining rubber washers (A) in the slip nuts at
the top of the supply pipes and install the tub faucet
according to the faucet installation instructions.
Floor
Bell Flange
Lock Nut
Rubber Washer
Metal Washer
Rubber Washer
Lock Nut
NPT Adapter
Lug ells or drop eared 90°
(Not included)
Support Mounted Between Floor Joists