Installation Sheet

ManualsBrandsSignature Hardware ManualsKitchen SinksSignature Hardware Archer 33" Zero Radius Single Basin Stainless Steel Farmhouse Sink with Beveled Apron

1Stainless Steel Farmhouse Sink Installation Instructions

INSTRUCTIONS

Unpack and inspect the sink for any shipping

damages and ensure that none of the

required pieces are missing. If you ﬁnd any

damages, do not install. Contact Customer

Service at 1-866-855-2284. If you need

assistance while installing your new farm-

house sink, call our Customer Service

number.

Due to the manufacturing process, each sink

will vary slightly dimensionally. Farmhouse

sinks may require custom cabinetry. We

recommend consulting an experienced

cabinet maker for assistance. Providing the

cabinet maker with the actual sink to be

installed will ensure a custom ﬁt.

Please use assistance when lifting the sink in

order to avoid personal injury.

We recommend consulting a professional if

you are unfamiliar with installing kitchen

ﬁxtures and plumbing. Signature Hardware

accepts no liability for any damages to the

ﬂoor, walls, plumbing or personal injury

during installation.

TOOLS AND MATERIALS:

Pencil

Read the following installation below. Observe

all local plumbing and building codes.

BEFORE INSTALLING

MATERIAL DESCRIPTION AND CARE

Thread Sealant

Tape Measure

STAINLESS STEEL FARMHOUSE SINK

Safety Glasses

Framing Square

Level

Hacksaw

Wood Shims

Drill

Basin Wrench

**Sealant - We recommend the use of

neutral cure silicone caulk or a general

purpose silicone sealant.

Stainless steel sinks are handcrafted from heavy gauge

stainless steel, which is extremely durable, but can be

scratched or scuﬀed when not cared for properly.

To maintain the condition of your stainless steel sink, simply

clean daily with mild soap and warm water and wipe the entire

surface dry with a dry, clean, soft cloth after each use. Keep

sink free of any standing water to prevent the buildup of

mineral deposits that can aﬀect the appearance of your sink.

Because iron particles often develop rust spots in stainles

steel surfaces, do not leave steel cookware or utensils on the

surface of the sink for long periods of time.

Do not use cleaners containing acids, harsh chemicals, or

abrasives. Use the Stainless Steel Scratch-B-Gone Kit to

remove minor scratches and maintain the beauty of your

stainless steel ﬁxture.

Summary of content (3 pages)

PAGE 1
STAINLESS STEEL FARMHOUSE SINK BEFORE INSTALLING TOOLS AND MATERIALS: Read the following installation below. Observe all local plumbing and building codes. INSTRUCTIONS Unpack and inspect the sink for any shipping damages and ensure that none of the required pieces are missing. If you ﬁnd any damages, do not install. Contact Customer Service at 1-866-855-2284. If you need assistance while installing your new farmhouse sink, call our Customer Service number.
PAGE 2
INSTALLATION OPTIONS We recommend undermount sink installation. Flush-mount and built-up installation are not recommended. Ensure there is adequate room for the faucet and backsplash installations. DRAIN INSTALLATION Apply a bead of silicone sealant to the base of the strainer ﬂange and place the ﬂange in the drain opening in the sink. If your drain has a disposer ﬂange, use the directions supplied with the garbage disposer to attach the disposer and complete your installation.
PAGE 3
PREPARE THE CABINET Farmhouse sinks may require custom cabinetry. We recommend consulting an experienced cabinet maker for assistance. Providing the cabinet maker with the actual sink that is to be installed will ensure a custom ﬁt. Allow clearance for the water supply lines, drains and a garbage disposal, if applicable. Build a support frame or install support bars from front to back along the inner sides of the cabinet. The frame must support the weight of the sink and all attachments.