Installation Sheet

ManualsBrandsSignature Hardware ManualsPlumbing34-1/2" Sebastian Floor Mounted Tub Filler Faucet with Shut Off Valves - Includes Hand Shower, Valve Included

FREESTANDING TUB FAUCET WITH SHUTOFF VALVE

GETTING STARTED

BEFORE YOU BEGIN

Your application and circumstances may call for varia-

tions to the installation instructions. We recommend

consulting a professional if you are unfamiliar with

installing plumbing ﬁxtures. Signature Hardware accepts

no liability for any damage to the faucet, ﬂoor, walls,

plumbing, or for personal injury during installation.

Installation on a concrete slab is not recommended.

Observe all local plumbing and building codes.

Unpack and inspect the faucet for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

Ensure that you have gathered all the required

materials that are needed for the installation.

Ensure that the main water supply is turned oﬀ.

TOOLS AND MATERIALS:

Plumbers

Tape

Thread

Sealant

Adjustable

Wrench

1Freestanding Tub Faucet with Shutoff Valve Installation Instructions

Neutral Cure

Silicone Sealant

Level

Tape Measure

Damp Cloth

Lug Ell

(x2)

Summary of content (4 pages)

PAGE 1
FREESTANDING TUB FAUCET WITH SHUTOFF VALVE TOOLS AND MATERIALS: BEFORE YOU BEGIN Your application and circumstances may call for variations to the installation instructions. We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the faucet, ﬂoor, walls, plumbing, or for personal injury during installation.
PAGE 2
FREESTANDING TUB FAUCET WITH SHUTOFF VALVE INSTALLATION 1. Thread each of the bell ﬂanges (F), one lock nut (G), and one rubber washer (H) onto the bottom of each lower riser pipe (E). Insert the lower riser pipes into the prepared installation holes in the ﬁnished ﬂoor. A B 2. Thread one metal washers (I), and one lock nut (J) onto each of the lower riser pipes from the under-ﬂoor access space. Connect the lower riser pipes to the main water supply using the rubber washers (K) and NPT adapters (L).
PAGE 3
FREESTANDING TUB FAUCET WITH SHUTOFF VALVE 7. Close the straight stop valves and brieﬂy turn on the main water supply to check for leaks. If leakage occurs, tighten the connections with an adjustable wrench as necessary. 9. Attach the hand shower cradle to the faucet body by threading it into the top of the faucet. Apply plumber’s tape or thread sealant to the thread before attaching. Tighten ﬁrmly. 8. Apply thread sealant to the inlets on the back of the faucet body.
PAGE 4
FREESTANDING TUB FAUCET WITH SHUTOFF VALVE 11. Turn on the main water supply and open the straight stop valves. 12. Turn the faucet on and allow the water to run through the spout for approximately 60 seconds. Divert the water to the hand shower and allow the water to ﬂow for another 60 seconds. Check to make sure that all connections are tight, and there are no leaks.