Installation Sheet

Hanging Plant Bracket Installation Instructions

1. Locate where you wish to hang your plant bracket. The

bracket will need to be mounted to wood. If mounting to

drywall, use a stud ﬁnder to locate a stud. If mounting to brick,

you will need to use concrete bolts or anchors (not provided).

HANGING PLANT BRACKET INSTALLATION

INSTRUCTIONS

TOOLS AND MATERIALS:

Unpack and inspect the product for shipping

damage. If you ﬁnd damages, do not install.

Contact Customer Relations at

1.866.855.2284. If you need assistance or

have questions while installing your item,

contact Customer Relations.

We recommend consulting a professional if

you are unfamiliar with installing hardware.

Signature Hardware accepts no liability for

any damage to your home, or for personal

injury during installation.

BEFORE INSTALLING INSTALLATION

Before you begin, read the installation

instructions below. Observe all local building

and safety codes.

Screwdriver

Drill

Level

Pencil

Stud Finder

2. Hold the plant bracket against the location you wish to

mount. Use a level to ensure the bracket is properly aligned.

3. While holding the bracket in place, mark the location of the

mounting holes with a pencil or marker.

wood drywall stud

brick

stud

ﬁnder

PAGE 1
HANGING PLANT BRACKET INSTALLATION BEFORE INSTALLING INSTALLATION Before you begin, read the installation instructions below. Observe all local building and safety codes. 1. Locate where you wish to hang your plant bracket. The bracket will need to be mounted to wood. If mounting to drywall, use a stud ﬁnder to locate a stud. If mounting to brick, you will need to use concrete bolts or anchors (not provided). INSTRUCTIONS Unpack and inspect the product for shipping damage.
PAGE 2
HANGING PLANT BRACKET INSTALLATION INSTALLATION 4. Drill small pilot holes in the marked locations from step 2. 5. Attach the bracket to the wall using the provided mounting screws. Be careful not to overtighten, which could strip or break the screw.