Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsKitchen FaucetsSignature Hardware Felicity 1.8 GPM Double Handle Wall Mounted Bridge Kitchen Faucet
1
1Felicity Wall-Mount Faucet Installation Instructions
FELICITY WALL-MOUNT FAUCET
Before installing, read entire Installation Instructions. Observe all local building and safety codes.
For the following installation instructions for your new wall-mount faucet it is assumed that any old xtures have been
removed and the water supply lines are in place. Two ½" pipe nipples should be attached to the water supply lines and
accessible for installation.
Unpack and inspect the product for any shipping damages. If you nd damages, do not install. Contact Customer
Service at 1-866-855-2284. If you need assistance or have questions while installing your faucet, contact Customer
Service.
We recommend consulting a professional if you are unfamiliar with installing kitchen xtures. Signature Hardware
accepts no liability for any damage to the oor, walls, plumbing or for personal injury during installation.
Turn off the water supply at the sink where the new faucet is being installed.
TOOLS AND MATERIALS:
INSTALLATION
1. Remove the 90° wall couplers from the faucet body.
2. Place thread sealant or plumber’s tape on the ½" pipe nipples.
3. Run a bead of silicone sealant along the base of the wall couplers.
4. Thread the wall couplers onto the ½" pipe nipples.
5. Make sure the bases of the couplers are rmly against the wall and that the couplers are aligned properly. Wipe
away any excess sealant with a damp cloth.
6. Place the faucet body on the wall couplers. Hand tighten the coupling nuts to secure.
7. Install the side spray hose and nozzle if included.
8. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight
(no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow
the water to ow through the spout for approximately 60 seconds. If you have a side spray, divert the water to the
spray and allow the water to ow through the hose for an additional 60 seconds.
Thread Sealant or Plumber's Tape Damp ClothSilicone Sealant

Summary of content (1 pages)