Installation Sheet

ManualsBrandsSignature Hardware ManualsShower FaucetsSignature Hardware Gooseneck Hand Shower Conversion Kit with Brass Shower Head, Porcelain Lever Handles and 54" x 27" D Curtain Ring

SHOWER CONVERSION KIT WITH HAND SHOWER

GETTING STARTED

TOOLS AND MATERIALS:

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing plumbing ﬁxtures. Signature

Hardware accepts no liability for any damage to the

plumbing, ﬂoor, walls, tub, or for personal injury

during installation.

Observe all local plumbing and building codes.

Unpack and inspect the item for shipping damage. If

any damage is found, contact our Customer

Relations team at 1-866-855-2284.

Ensure that you have gathered all of the required

materials that are needed for the installation.

For the following instructions, it is assumed that

the tub faucet is already in place and prepared for

installation of the shower conversion kit

Plumber’s Tape*

Thread Sealant*

Adjustable

Wrench*

Hex Wrench

1Shower Conversion Kit with Hand Shower Installation Instructions

Phillips

Screwdriver*

Not Included*

Hand Shower

Diverter

Cone Washer

Riser Nut

O-ring

Tub Faucet

Hand Shower Hose

O-ring

Hand Shower

Hand Shower Cradle

Riser Pipe

Summary of content (6 pages)

PAGE 1
SHOWER CONVERSION KIT WITH HAND SHOWER BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, ﬂoor, walls, tub, or for personal injury during installation. Observe all local plumbing and building codes. Riser Pipe Unpack and inspect the item for shipping damage. If any damage is found, contact our Customer Relations team at 1-866-855-2284.
PAGE 2
SHOWER CONVERSION KIT WITH HAND SHOWER INSTALLATION 1. Insert the provided rubber O-ring into the base of the hand shower diverter, and attach the diverter to the tub faucet as shown. Apply a bit of thread sealant or plumber’s tape to the threads before tightening. Use an adjustable wrench to tighten ﬁrmly. 3. Slide the riser nut onto the lower riser pipe, with the threaded side facing down.
PAGE 3
SHOWER CONVERSION KIT WITH HAND SHOWER 5. Attach the handheld shower head to its handle, then use the provided hose to connect the hand shower to the diverter outlet, as shown. Insert one of the provided rubber O-rings into each end of the hose before tightening. 7. Complete the installation by installing the shower head onto the upper riser pipe. 6. Insert the upper riser pipe through the mounting hole located on the shower curtain rod.
PAGE 4
SHOWER CONVERSION KIT - NO HAND SHOWER BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁxtures. Signature Hardware accepts no liability for any damage to the plumbing, ﬂoor, walls, tub, or for personal injury during installation. Observe all local plumbing and building codes. Riser Pipe Unpack and inspect the item for shipping damage. If any damage is found, contact our Customer Relations team at 1-866-855-2284.
PAGE 5
SHOWER CONVERSION KIT - NO HAND SHOWER INSTALLATION 1. Slide the riser nut onto the lower riser pipe, with the threaded side facing down. Slide the rubber cone washer onto the lower riser pipe below the riser nut, with the beveled side of the washer facing down as shown. 2. Insert the lower riser pipe into the top of the tub faucet and secure it by tightening the riser nut. Apply a bit of thread sealant or plumber’s tape to the threads before tightening. Use an adjustable wrench to tighten ﬁrmly. 3.
PAGE 6
SHOWER CONVERSION KIT - NO HAND SHOWER 5. Once installation is complete, turn the faucet on and divert water to the shower head.