Signamax FO-065-1200 series 12-Port Media Converter Signamax Connectivity Systems FO-065-1185 Media Converter Chassis System U S E R ’ S User’s Manual G U I D E 1
Signamax Connectivity Systems F0-065-1185 Media Converter Chassis System User’s Guide
Signamax FO-065-1185 Media Converter Chassis System Preface This manual describes how to install and use the Signamax FO065-1185 Media Converter Chassis System.
Signamax FO-065-1185 Media Converter Chassis System Table of Contents PREFACE 1 TABLE OF CONTENTS 2 PRODUCT OVERVIEW 3 SIGNAMAX FO-065-1185 MEDIA CONVERTER CHASSIS SYSTEM PACKAGE CONTENTS PRODUCT FEATURES FRONT PANEL DISPLAY Front Panel Understanding LEDs INSTALLATION SELECTING A SITE FOR THE EQUIPMENT DECIDING HOW TO INSTALL THE SYSTEM 5 5 6 6 7 Mounted to 19-inch standard rack Desktop or any flat surface 7 7 INSTALLING MEDIA CONVERTER CONNECTING TO POWER 8 9 Power supply Connecting to pow
Signamax FO-065-1185 Media Converter Chassis System Product Overview Signamax FO-065-1185 Media Converter Chassis System Figure 1: Chassis equipped with two power supplies Package Contents When you unpack the product package, you shall find these items listed below.
Signamax FO-065-1185 Media Converter Chassis System Product Features ♦ ♦ ♦ ♦ ♦ HOUSE UP TO SIXTEEN MEDIA CONVERTERS FRONT PANEL LEDS FOR POWER STATUS STANDARD 19” RACKMOUNTABLE SIZE , 2U NON -STOP OPERATION & MINIMAL DOWNTIME HOT-SWAPPABLE The following items are designed to be hot swappable to allow easy and quick replacement: - Media converters - Power supplies with fans ♦ ADEQUATE VENTILATION - Provides one cooling fans on the left and right side - Ventilation holes on each side ♦ POWER REDUNDANCY
Signamax FO-065-1185 Media Converter Chassis System Front Panel Display FRONT PANEL The front panel of this Signamax FO-065-1185 Media Converter Chassis System shows it is capable of housing up to sixteen media converters in bay 1~16. There is an array of LED indicators, which provides you with instant feedback on the status of each power.
Signamax FO-065-1185 Media Converter Chassis System Installation Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: - The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius). - The relative humidity should be less than 90 percent, non-condensing.
Signamax FO-065-1185 Media Converter Chassis System Deciding How to Install the System We strongly suggest that you install the chassis first, as this is more convenient for you to install media converters into the chassis with ease. The accessories supplied in the product package includes: rackmount screws, rackmount brackets, and bracket screws.
Signamax FO-065-1185 Media Converter Chassis System Installing Media Converter The chassis is equipped with media converter carriers, each of which is fitted into bays of the chassis. Step 1: To install a media converter onto any of the carriers, you have to unscrew the carrier from the desired bay first. Step 2: Fit the media converter onto the carrier. Step 3: When the media converter is completely seated onto the carrier, insert the carrier to the guide rails of the bay slot.
Signamax FO-065-1185 Media Converter Chassis System Connecting to Power POWER SUPPLY The chassis ships with two power supplies. When the chassis is equipped with two power supplies, you can have the following advanced performance. ♦ Hot Swappable – The design of the power system is based on an idea of providing maximum flexibility and redundancy. In this way, you may remove any of the two power supplies without turning off the system.
Signamax FO-065-1185 Media Converter Chassis System Step 3: Turn on the chassis system by flipping the ON/OFF switch beside the receptacle to ON position. The LEDs on the front panel of the media converter chassis system will come on then.
Signamax FO-065-1185 Media Converter Chassis System Cooling System The chassis system can hold two power supplies and up to sixteen media converters, and therefore, it is necessary to provide a good cooling system and so to achieve obtain adequate ventilation. The chassis is equipped with two hot-swappable power supplies with fans at the rear. The chassis is also equipped with one fan on the left and right side of the chassis.
Signamax FO-065-1185 Media Converter Chassis System Specifications CHASSIS SYSTEM Capacity Power Cooling LED Indicators Dimensions Net Weight Sixteen bays for housing up to sixteen media converters Two power supplies provided, hotswappable Two power supplies with fans One fan on the left and right side of the chassis 2 LEDs (1 LED for each power supply’s power status) W440 mm × D276 mm × H90 mm Standard 19” size, 2 U 8.5kg approx.
Signamax FO-065-1185 Media Converter Chassis System Contact Information SIGNAMAX CONNECTIVITY SYSTEMS An AESP Company 999 N.W. 159th Drive Miami, Florida 33169, U.S.A. Phone: 305-944-7710 Fax: 305-652-8489 Sales: 800-446-2377 Tech. Support: 800-446-2377, ext. 201 Http://www.signamax.com E-mail: info@signamax.