Signamax Connectivity Systems 10/100BaseT/TX to 100BaseFX Industrial PoE Converter Series U S E R ’ S G U I D E
Signamax Connectivity Systems 10/100BaseT/TX to 100BaseFX Industrial PoE Converter Series User’s Guide
Signamax 10/100TX to 100FX Industrial PoE Media Converter FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Preface This manual describes how to install and use the Signamax Industrial PoE Media Converter. The Signamax Industrial PoE Media Converter introduced here provides one channel media conversion between 10/100BaseT/TX and 100BaseFX. A member of the growing family of Industrial Media Converters, this Industrial PoE Media Converter addresses a need for a Power over Ethernet (PoE) Media Converter.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Product overview Features on the media converter Illustrative LED functions Installation instructions Specifications User’s Manual 3
Signamax 10/100TX to 100FX Industrial PoE Media Converter Table of Contents FCC WARNING ............................................................. 1 CE MARK WARNING ..................................................... 1 TRADEMARKS ............................................................... 1 PREFACE ....................................................................... 2 TABLE OF CONTENTS .................................................... 4 PRODUCT OVERVIEW .....................................
Signamax 10/100TX to 100FX Industrial PoE Media Converter Product Overview Industrial PoE Media Converter Packing Contents When you unpack this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to our authorized reseller.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Product Highlights Basic Features Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment. Supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE) or supports 30W High Power PoE Power Sourcing Equipment (PSE). DIP Switch configuration for “Link Fault Signaling”, speed, duplex mode. Supports IEEE802.3/802.3u/802.3x.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Front Panel Display Status LEDs LEDs State Indication Power over Ethernet (PoE) PoE Steady Powered Device (PD) is connected. Off Powered Device (PD) is disconnected. 10/100BaseT/TX, 100BaseFX/BX Link/ACT Steady A valid network connection established. Flashing Transmitting or receiving data. ACT stands for ACTIVITY.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Physical Ports This Media Converter provides: One 10/100BaseT/TX port + one 100BaseFX/BX port Connectivity RJ-45 connectors. SC or ST connector on 100BaseFX fiber port. SC connector on 100BaseBX fiber port.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.
Signamax 10/100TX to 100FX Industrial PoE Media Converter DIN Rail Mounting Fix the DIN rail attachment plate to the back panel of the Media Converter. Installation: Place the Media Converter on the DIN rail from above using the slot. Push the front of the Media Converter toward the mounting surface until it audibly snaps into place. Removal: Pull out the lower edge and then remove the Media Converter from the DIN rail.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Power Input Assignment (30W High Power PoE model) 48~52VDC for 15.4W + 52~57VDC for 30W Power 1 - Power Ground Terminal Block Earth Ground Power 2 48~52VDC for 15.4W 52~57VDC for 30W DC Jack DIP Switch There are four pins on the DIP switch for port settings. Refer to the table below for more details.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Connecting to Your Network Cable Type & Length It is necessary to follow the cable specifications below when connecting the Media Converter to your network. Use appropriate cables that meet your speed and cabling requirements. Cable Specifications Speed Connector 10BaseT RJ-45 100BaseTX RJ-45 100BaseFX 100BaseFX 100BaseBX 100BaseFX Port Speed Half/Full Duplex 10/20 Mbps Cable Max.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Specifications Industrial PoE Media Converter Applicable Standards Switching Method Forwarding Rate 10BaseT: 100BaseTX: 100BaseFX/BX: Performance Cable 10BaseT: 100BaseTX: 100BaseFX/BX: LED Indicators Dimensions Net Weight Power Consumption Operating Voltage & Max. Current Consumption Power Operating Voltage & Max.
Signamax 10/100TX to 100FX Industrial PoE Media Converter Contact Information SIGNAMAX CONNECTIVITY SYSTEMS An AESP Company 999 N.W. 159th Drive Miami, Florida 33169, U.S.A. Phone: 305-944-7710 Fax: 305-949-4483 Sales: 800-446-2377 Tech. Support: 800-4462377, ext. 201 Http://www.signamax.com E-mail: info@signamax.