Signamax Connectivity Systems Gigabit SFP Converter Series Model - 065-1896SFPTB U S E R ’ S G U I D E
Signamax Connectivity Systems Gigabit SFP Converter Series User’s Guide
Signamax Gigabit SFP Hardened Media Converter FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Signamax Gigabit SFP Hardened Media Converter Preface Our hardened media converter provides an affordable solution for rugged environments, transportation road-side cabinets, industrial shop floors, multi tenant dwellings or Fiber To The Home (FTTH) applications. Capable of operating at temperature extremes of -40°F to +167°F (-40°C to +75°C), this is by far the media converter of choice for harsh environments in which space constraints exist.
Signamax Gigabit SFP Hardened Media Converter Table of Contents FCC Warning ................................................................................ 1 CE Mark Warning ........................................................................ 1 Trademarks.................................................................................... 1 Preface............................................................................................ 2 Table of Contents .........................................
Signamax Gigabit SFP Hardened Media Converter Introduction The media converter provides one channel for media conversion between 10/100/1000BaseT/TX and a Gigabit SFP socket port with the Link Fault Signaling (LFS) function. This hardened fiber optic solution is perfectly suitable for industrial applications or rugged environmental conditions.
Signamax Gigabit SFP Hardened Media Converter The Gigabit SFP socket with SFP fiber transceiver should be set to (forced full duplex mode, forced full duplex mode) or (auto mode, auto mode) when two 10/100/1000BaseT/TX and Gigabit SFP socket onechannel media converters are connected to each other via the Gigabit SFP socket with a SFP fiber transceiver. Full wire-speed forwarding rate. Back-pressure & IEEE802.3x compliant flow control.
Signamax Gigabit SFP Hardened Media Converter Packing List When you open this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to our authorized reseller.
Signamax Gigabit SFP Hardened Media Converter One-Channel Media Converter Ports This Converter provides one copper port and one Gigabit SFP socket port. The Gigabit SFP socket port is available for options of Multi-mode, Single-mode, or WDM Single-mode SFP fiber transceiver using LC connector. The copper port uses RJ-45 connector, auto-MDIX, and auto negotiates.
Signamax Gigabit SFP Hardened Media Converter Front Panel & LEDs The LED indicators give you instant feedback on converter status: LEDs FAULT Power1 Power2 State Steady Off Steady Off Indication Power redundant system or ports function abnormally Power redundant system and ports function normally Power on Power off Power3 LFS Steady Off 1000BaseSX/LX LINK/ACT Steady Flashing LFS function enabled LFS function disabled A valid network connection established for SFP port Transmitting or receiving da
Signamax Gigabit SFP Hardened Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.
Signamax Gigabit SFP Hardened Media Converter DIN Rail Mounting • • • 10 Fix the DIN rail attachment plate to the back panel of the media converter. Installation: Place the media converter on the DIN rail from above using the slot. Push the front of the media converter toward the mounting surface until it audibly snaps into place. Removal: Pull out the lower edge and then remove the media converter from the DIN rail.
Signamax Gigabit SFP Hardened Media Converter Connecting to Power Redundant DC Terminal Block Power Inputs and 12VDC DC Jack: Redundant DC Terminal Block Power Inputs (preferred connection) There are two pairs of power inputs can be used to power up this device.
Signamax Gigabit SFP Hardened Media Converter Step 1: Connect the DC power cord to the plug-able terminal block on the media converter, and then plug it into a standard DC outlet. Step 2: Disconnect the power cord if you want to shut down the media converter. 12VDC DC Jack (not supplied; available separately via special order) Step 1: Connect the AC to DC power adapter to the receptacle on the topside of the media converter.
Signamax Gigabit SFP Hardened Media Converter power source to this terminal to prevent a short circuit to your power supply.
Signamax Gigabit SFP Hardened Media Converter Specifications Applicable Standards Fixed Ports Speed 10BaseT 100BaseTX 1000BaseT 1000BaseSX/LX Forwarding rate Cable 1000BaseT 1000BaseSX/LX LED Indicators Dimensions Weight Power Operating Voltage & Max. Current Consumption Power Consumption Operating Temperature Storage Temperature Humidity Safety EMI 14 IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.
Signamax Gigabit SFP Hardened Media Converter EMS EN61000-6-2: EN61000-4-2 (ESD Standard) EN61000-4-3 (Radiated RFI Standards) EN61000-4-4 (Burst Standards) EN61000-4-5 (Surge Standards) EN61000-4-6 (Induced RFI Standards) EN61000-4-8 (Magnetic Field Standards) Environmental Test IEC60068-2-6 Fc (Vibration Resistance) Compliance IEC60068-2-27 Ea (Shock) IEC60068-2-32 Ed (Free Fall) NEMA TS1/2 Environmental requirements for traffic control equipment User’s Manual 15
Signamax Gigabit SFP Hardened Media Converter Contact Information SIGNAMAX CONNECTIVITY SYSTEMS An AESP Company 16295 N.W. 13h Avenue Miami, Florida 33169, U.S.A. Phone: 305-944-7710 Fax: 305-652-8489 Sales: 800-446-2377 Tech. Support: 800-4462377, ext. 201 Http://www.signamax.com E-mail: info@signamax.
