Specifications

ManualsBrandsSignaMax ManualsMedia Converter065-1895 series

065-1895 series Hardened Media Converter

User’s Manual 1

Preface

This hardened media converter provides an affordable solution for rugged

and outdoor environments, transportation roadside cabinets, industrial floor

operations, multi-tenant dwellings, or Fiber To The Home (FTTH)

applications. It is the media converter of choice for harsh environments

with space constraints. It is capable of operating at temperature extremes

of -29° F to 165° F (-34° C to +74° C).

Plug-and-Play Solution:

The Signamax 065-1895 series hardened media converter is a plug-and-

play media converter with a compact case size. There is no complicated

software set up required.

This manual describes how to install and use the Signamax 065-1895

series hardened media converters with the Link Fault Signaling (LFS)

function. The converters introduced here provide one channel of media

conversion between 1000BaseT and 1000BaseSX/LX.

These converters fully comply with IEEE802.3ab 1000BaseT and

IEEE802.3z 1000BaseSX/LX standards.

In this manual, you will find:

y Product overview

y Features of the of the 065-1895 series media converters

y Illustrative LED functions

y Installation instructions

y Specifications

Summary of content (10 pages)

PAGE 1
065-1895 series Hardened Media Converter Preface This hardened media converter provides an affordable solution for rugged and outdoor environments, transportation roadside cabinets, industrial floor operations, multi-tenant dwellings, or Fiber To The Home (FTTH) applications. It is the media converter of choice for harsh environments with space constraints. It is capable of operating at temperature extremes of -29° F to 165° F (-34° C to +74° C).
PAGE 2
065-1895 series Hardened Media Converter Table of Contents Preface 1 Table of Contents 2 Introduction 3 PRODUCT OVERVIEW ......................................................................................... 3 PRODUCT FEATURES .......................................................................................... 4 PACKING LIST ...................................................................................................... 4 One-Channel Media Converter 5 PORTS...................................
PAGE 3
065-1895 series Hardened Media Converter Introduction The media converter provides one channel for media conversion between 1000BaseT and 1000BaseSX/LX with the link-fault-pass-through function. This hardened fiber optic solution is perfectly fitted in the industrial applications or rugged environment.
PAGE 4
065-1895 series Hardened Media Converter Product Features y Meets NEMA TS1/TS2 environmental requirements such as temperature, shock, and vibration for traffic control equipment y Meets IEC61000-6-2 EMC Generic Standard Immunity for industrial environment y One-channel media conversion between 1000BaseT and 1000BaseSX/LX y Fiber media allows Multi-mode fiber or Single-mode fiber using SC y The fiber port should be set to (forced full duplex mode, forced full duplex mode) or (auto mode, forced full duplex
PAGE 5
065-1895 series Hardened Media Converter One-Channel Media Converter Ports The Converter provides one copper port and one fiber port. The fiber port provides options of Multi-mode fiber or Single-mode fiber using an SC connector. The copper port uses RJ-45 connector, auto-MDIX, and auto negotiates. Port Settings Port settings are made very simple by means of a DIP (Dual Inline Package) switch on the front panel of the hardened media converter.
PAGE 6
065-1895 series Hardened Media Converter Front Panel & LEDs LED Indicators The LED indicators give you instant feedback on converter status: LED’s State Indication FAULT Steady Power or ports function abnormal Off Power and ports function normal PWR1 PWR2 Steady Off Power on PWR stands for POWER Power off LNKC Steady A valid network connection established for copper port Off No valid network connection established for copper port Steady A valid network connection established for fiber port
PAGE 7
065-1895 series Hardened Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: y The ambient temperature should be between -29° to 165° Fahrenheit (-34° to +74° Celsius).
PAGE 8
065-1895 series Hardened Media Converter Connecting to Power Redundant 1.5A 24VDC power inputs or 3A 12VDC Jack: 3A 12VDC Jack Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of the media converter. Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a standard AC outlet with the appropriate AC voltage. Redundant 1.5A 24VDC Power Inputs There are two pairs of 1.5A 24VDC power sources that can be used to power up this device.
PAGE 9
065-1895 series Hardened Media Converter Alarms for Power and Port Failure Step 1: There are two pins on the terminal block that are used for power failure detection. It provides a normal closed output when the power source is active. Use this as a dry contact application to send a signal for power failure detection. Special note: The relay output is normal in an open position when there is no power to the media converter.
PAGE 10
065-1895 series Hardened Media Converter Specifications Applicable Standards IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX Fixed Ports Speed 1000BaseT 2000Mbps for full-duplex 1000BaseSX/LX 2000Mbps for full-duplex Forwarding rate Cable 1 copper port, 1 fiber port 1000BaseT 1000BaseSX/LX LED Indicators 1,488,000pps for 1000Mbps 4-pair UTP/STP Cat. 5 up to 100m MMF (50 or 62.