Datacomtools.com TM The Web’s Best Source for Telecom Tools and Testers TEST IT CERTIFY IT... FREE $99 SHIPPING ON ORDERS OVER (800) 543.4333 • www.datacomtools.
Shipping Methods Patch Cables - In stock products will ship the same day if ordered before 4pm EST Mon-Fri. - Our standard shipping method is Federal Express but other methods are available. - Free ground shipping on orders over $99* - APO orders ship via US Mail. Connect your workstations, printers, servers, and other devices with these cat. 5E or cat. 6 patch cables.
BMP TM 21 Meet the newest member of your crew OFFRCYHOAUSRE** 10% D RA Y PU NEXT B CODE: COUPON UP Y BRAD S - One-handed operation with large display and backlight - Terminal block and patch panel options - Advanced serialization, barcoding, and symbols. - Cuts and hold printed labels until you need them - Rugged construction... withstands a 5ft. drop onto concrete.
LabelMark Software Brady’s LabelMark™ Labeling Software offers features that make creating labels more efficient. This labeling software is written specifically for markets where wire and cable marking is a constant and tedious job. LabelMark labeling software is the easy solution for label design, editing, and printing. This software is a fast system for creating and printing professional, accurate, & legible labels.
- Permanent, Quick, Crisp Labels - Built-in Electrical and Voice/Data Symbols - Autotext Sizing TLS2200 reads your label size and style, selects the most suitable type size, and instantly registers it for printing - Variable font sizes from 1 (4 point) to 19 (72 point) FF YHOAUSRE* 10%RAO DY PURC NEXT B CODE: COUPON UP Y BRAD S TLS2200 Thermal Printer Kit Battery pack Battery charger Black ribbon for Cat5 labels Black ribbon TLS2200 TLS2200-BP TLS2200-BC R4310 R6010 $795.00 $93.44 $44.47 $28.17 $29.
FF YHOAUSRE* 10%RAO DY PURC NEXT B CODE: COUPON UP Y BRAD S Handheld Labeler The versatile, feature-rich Brady IDXPERT handheld is now even more powerful with the addition of PC-Connect printing, Voice/Data temples for punch block and faceplates, 10 additional font sizes, and more! Starter Kits Xpert-Kit-ABC-VD - Voice & Datacom Kit: 1 Cartridge each of: - XSL-21-427 - Self Lam markers - X-30-422 - Port Labels & Faceplate Labels - XC-475-412 - Non-adhesive strips - XC-1000-580-YL-BK - 1” yellow vinyl
IDXPERT Labels FF YHOAUSRE* 10%RAO DY PURC For more info on the IDXPERT Labels go to: www.datacomtools.com/Xpert_Labels Peramsleeve - Wire Marking Sleeves Cable Markers NEXT B CODE: COUPON UP Y BRAD S These heat-shrink sleeves are durable, permanence and aesthetic appearance. The labelers fast shrink rate saves time & cost during installation. Ideal for marking data cabling, this cable marker’s protected printing offers superior abrasion resistance and resistance to dirt, solvents, and water.
NEW!! BMP TM 71 Thousands of Applications. Hundreds of Labels. One Label Printer LABEL PRINTER OFFRCYHOAUSRE** 10% D RA Y PU NEXT B CODE: COUPON UP Y BRAD S The Best features and functionalities of brady’s portable label printers are now combined into one easy-to-use, top-of-the-line portable thermal transfer printer - Brady’s NEW BMP™71 printer.
BMP™71 For more info on the BMP™71 Labels go to: www.datacomtools.com/BMP71-Labels Permasleeve Wire Marking Sleeves - Heat Shrinkable Voice/Data Cabling Labels & Tags Labels for the Brady BMP71 thermal transfer printer Heat-Shrinkable White Polyolefin (B-342) Part Number 1.015” Marker Width M71-94-1-342 M71-125-1-342 M71-187-1-342 M71-250-1-342 M71-375-1-342 M71-500-1-342 1.
Pan-Way LD Surface Raceway System - For routing data and low voltage cabling - One-Piece Hinged Design allow cable to be laid in - Factory applied adhesive backing speeds installation - FT4 rated - Terminates using surface mount outlet box solutions or - Panduit® Mini-Com® Surface Mount Boxes *for other colors replace IW (Off White) with EI (electric Ivory), or WH (White). .94” Part # Description Size Length Price LD3IW6-A One-piece latching surface raceway .77” X .46” 6’ $9.25 1.
Hook and Loop Cable Ties 8” (25pc Pack) 900-098-BK 900-098-BU 900-098-GN 900-098-OR 900-098-RD 900-098-WH 900-098-YL 902-035 Stapler Cable Ties Black Cable Ties Blue Cable Ties Green Cable Ties Orange Cable Ties Red Cable Ties White Cable Ties Yellow Material - 50ft. - CP-391-1: Round Cable: Height: 4mm - 6mm, Flat: Height: 2.5mm-4mm W: Below 8mm) - CP-391-2: Round Cable: Height: 6mm - 8mm, Flat: Height: 4.5mm-6.3mm W: Below 10.3mm) $7.50 $7.50 $7.50 $7.50 $7.50 $7.50 $7.50 $21.
1. Vertical Managers - Integral retainers on the end of each finger to help contain cables within rack unit - Bend radius fingers align w/rack spaces to support as they go to a vertical pathway - Covers can open 110° to the left/right to provide access to cables inside. 1 Part Number Part Description Depth (In.) Height (In.) Width (In.) Cable Capacity - Cat 6 (.250) No. of Rack Spaces Price WMPV22E Front & rear vertical manager 11.8 40.2 4.9 131 Front and 131 Rear 22 $97.
Horizontal Cable Managers WM series cable managers provide increased strength and do not interfere with panels mounted above or below. They are a popular and economical solution for providing a clean and simple means of organizing small-to-large bundles of cables and patch cords. WM-143-5 WM-144-5 WM-145-5 Horizontal Cable Managers Description 1 ¾” (1 sp.) “micro-clip” 1 ¾” (1 sp.) “micro-clip” w/end D-Rings 1 ¾” (1 sp.) “D-Ring” 1 ¾” (1 sp.) “D-Ring” w/end D-Rings 3 ½” (2 sp.) “D-Ring” 3 ½” (2 sp.
Versi-Duct Management Versi-Duct 8” Channel Cable Management - Ideal for today’s large-scale deployments & CAT 6A installations w/larger dia.
WireMate Cable Management Kit Organize Cables: - Prevents trip hazards, toddler and pet entanglements - Eliminates wire tangles & clutter - Neatly conceals excess wires of varying thickness & contributes to a clean work space - Simplifies set-up, cleaning and relocations WIREMATE-XX Protect and Shield Wires: - Reduces accidental power disruptions and downtime - Protects wires from liquid spills - Discourages tampering of configuration components - Durable high-impact precision molded resin for indo
Screwdriver Sets Hinged Wall Mount Panel Wall Mount Horizontal Equipment Cabinet - 150 lbs weight capacity - Reversible hinged door with lock and padlockable latch allows opening from either side and provides additional security - Electrical box simplifies power distribution - Constructed of 16-gauge steel, the HDR measure 24” W x 36” H x 7 1/2” D - Hinged for access to rear of equipment - Available in 1, 2, 4 & 6 rackspace sizes - 6” depth - Cable lacing tie points built-in - Heavy-duty 11-gauge rackrail
WRP/WRS Series Low-Profile Wall Cabinets SBX Series Wall Mount Cabinet Economical wall mount rack for small systems WRS/WRP Series 19” low-profile wall-mount racks allow vertical equipment mounting for space efficiency and aesthetics. Thermal Management - Vented front and two bottom located fan mounting positions facilitate thermal management Structural Features: - Removable backpan simplifies installation and provides easy access to equipment connections.
CableSafe™ Data Wall Cabinet Structural Features - 26” width cabinet to allow for much needed space for patching.
U2 Rackmount Shelf Hinged Plexiglass Security Covers These Easy-to-install universal shelves accommodate components up to 17 3/8” wide. Made from 16-gauge steel, finished in a durable black powder coat and individually boxed. Part # U1 U2 U3 U4 Racking Height 1 3/4” (1 Space) 3 1/2” (2 Space) 5 1/4” (3 Space) 7” (4 Space) Overall Depth 10 3/4” 14 9/16” 14 9/16” 15 1/2” Usable Depth 10 11/16” 14 3/8” 14 3/8” 15 5/16” Weight 35lbs. 50lbs. 70lbs. 85lbs. Price $28.75 $42.50 $52.65 $58.
QuickPort® UTP & STP Connectors Leviton offers a wide variety of copper connectors from CAT 6A (10G) to CAT 3 solutions. CAT 6A eXtreme® 10G, our highest performance connector, featuring the Cone of Silence™ and Retention Force Technology® (RFT) resist alien crosstalk (AXT) between neighboring connectors, and offers unparalleled signal integrity. eXtreme 6+ and GigaMax® 5e+ component-rated connectors also feature patented RFT for long term performance.
CAT 6 Patch Panels Universal panels feature 6-port RJ45 modules on the front, industry standard 110-style punchdown on the rear, & T568A/B universal wiring configurations. QuickPort Patch Panels are pre-loaded with black eXtreme 6+ connectors. 48-Port, angled design provides improved access to 110 punchdown fields, and increased density with enhanced patch cord transition to vertical cable management. For high density applications choose eXtreme 6+ 1RU 48-Port Patch Panels.
MRJ21 Connector Systems The MRJ 21 Connector System Solution is a high-density, high-performance, modular copper cabling system. AMP Netconnect’s matched powersum 24-pair cabling and connector solution provides a variety of applications to up to 12 ports with a single cable. This solution supports any plug and play environment including data centers and zone cabled or open office environments.
MRJ21 Cable Assemblies - MRJ21 cable assemblies’ small foot print reduces cable bulk un pathways and conduits - Reduced cable bulk allows better air circulation and equipment cooling in data centers - Approximately 30% less area and 20% less weight than 4-pair cabling - Dense CHAMP connector style double blade design with offset jackscrews - Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation. - 1.
RE-BOX Remote Equipment Cabinets IFP Face Plates The RE-BOX® cabinets are specifically designed for housing remote and network equipment and exceed the stringent requirements of UL and Telcordia™ standards. The resulting safe and secure environment surpasses the industry for protecting communications equipment in locations such as classrooms, warehouses, and retail outlets. Use the RE-BOX® as a small remote data center. RE2 RE2B RE4 RE4B RE4X RE4XB RE-BOX® Commercial Cabinet, 32.2”H x 24.
Cat 6 Patch Panels S110® Field Termination Kits Consolidation points are an interconnection between the telecom room to the telecom outlet. Using consolidation points, new wiring for a work station in an open office environment need extend only as far as the consolidation point, not all the way back to the telecommunication room. This provides for increased flexibility and economy when work stations require frequent re-configuration.
SignaMax Media Converters CONNECTIVITY SYSTEMS Media Converters from Signamax are an easy and cost-effective way to establish a fiber optic cabling infrastructure within your existing network. Signamax provides a wide array of converters to support your Ethernet, Fast Ethernet, and Gigabit Ethernet requirements.
LightCrimp Plus - Easiest and quickest fiber termination available - Connections take under a minute. - Limited or no training required - No polishing needed: simply strip, cleave, and crimp. - Factory-polished to a consistent high quality end finish-eliminates return loss concerns. - No epoxy, curing ovens, or ultraviolet; no power needed.
Fiber Termination Kit Achieve faster fiber terminations and higher performance with Siemon’s LightSpeed Termination Kit. This kit contains all the tools required for termination of singlemode or multimode ST or SC connectors - packaged in a rugged canvas case. All consumables are available in consumables kit.
XLR8 Fiber Termination Kit Siemon’s new XLR8 mechanical splice termination kit incorporates an exclusive dual-process activation tool which dramatically reduces termination time per connector. The tool kit is universal - capable of terminating both SC and LC interfaces.
Fiber Optic Strippers 45-349 45-350 45-352 Jacket Stripper Lite-Strip Fiber Stripper MiniLite Fiber Stripper - Removes the jacket from 3mm - V-blades strip a wide - Designed to remove Simplex/Duplex fiber cable. range of outer insulations. rubber & coating from - Form-ground, blades for easy - Spring returns handles to 235u fiber. stripping w/o damage to fiber. original position. - Removes 3mm jacket.
Fiber Optic Visual Fault Finder Fiber Optic Cable Tester - Simple, versatile, and user-friendly design - Rugged, compact, and splash proof aluminum housing - 650nm laser - High output ≥ 0.5mW - Continuous wave output mode (CW) for steady illumination - Blinking output mode increases viewing contrast - Support 2.5mm connect (for PC/FC/SC/ST) - The button switch permits one-handed operation - Connector Type 1.
Optical Fiber Inspection Scope Testing The Noyes OFS 300 from AFL Telecommunications is a versatile Optical Fiber Scope with precision 200X magnification. This handheld and rugged scope is used for inspection of optical fiber connectors for scratches, dirt, or other problems normally associated with poor transmission performance. The OFS 300 offers 60 hours of continuous battery life from standard 2 x AA batteries and features an LED indicator, which will flash when batteries require replacement.
Single/Multimode Test Kit w/Wave ID & Set Reference These test kits combines an optical power meter and LED and Laser light source and is ideally suited for testing fiber optic networks with hybrid cables. SLMP5-5 Contains: - OLS4 optical light source - OPM5-2D power meter - AA batteries - Protective rubber boots - Adapter cap - Windows® software and user’s guide - 50 and 62.
SimpliFiber Pro Fiber Optical Loss Test Kits Testing Testing With new advanced capabilities that make testing simple, SimpliFiber® Pro Optical Power Meter and Fiber Test Kits are the best “go-to” kits for anyone involved in first-line optical fiber cabling installation and verification.
SignalTEK-FO SIGNALTEK™ tests the link’s ability to support applications by transmitting Ethernet packets on wire and measuring the link performance according to IEEE802.3ab Gigabit Ethernet standard. SIGNALTEK-FO™ offers all of the existing capabilities of the SIGNALTEK™ Qualifier such as Gigabit Ethernet Qualification, active link testing, & adds the power capability of fiber qualification.
Fiber OneShot PRO Fiber OneShot PRO takes the complexity out of singlemode fiber testing by analyzing fiber links and measuring faults up to 15 miles in less than five seconds.
FiberInspector Mini Use FiberInspector™ Mini to examine installed fiber terminations or ensure terminations are smooth and clean. Avoid the #1 cause of cause of fiber link failure: dirty end-faces. The Fluke Networks FiberInspector Mini Video Microscope puts the solution to contaminated end-faces in the palm of your hand. This portable video microscope works ten times faster than traditional scopes.
Chemtronics Fiber Optic Cleaning Kits CFK-1010 CFK-1000 ® The fiber optic kit for installation and maintenance, ITW Chemtronics has included only the cleaning supplies necessary for making a successful 2.5mm fiber optic connection. Electro-Wash PX precision fiber optic cleaner and QbE cleaning system are included for performing the CCp. Swabs are also included for cleaning ferrules, alignment sleeves and backplace connections. Electro-Wash MX premoistened wipes are included for tool and cable wiping.
AFL Telecommunications A Fujikura Business MPO Cleaner The MPO Cleaner is a high-performance device designed for cleaning the ferrule end-faces of MPO connectors. This tool cleans the fiber endface without the use of alcohol. It saves time by effectively cleaning all 12 fibers at once. The MPO connector cleaner is designed to clean both exposed jumper ends and connectors in adapters.
AFL Telecommunications A Fujikura Business Fusion Splicer FSM-11S Splicer Includes: - FSM-11S Fusion Splicer - FH-50-250 Fiber Holders - BTC-04 Battery Charger - BTR-07 Battery Splicemate’s Advanced intelligence features include dual-camera fiber inspection to insure the splice is right, and auto arc calibration. An industry first. It’s easy to operate and quickly makes low loss splices with all common types of optical fibers up to 4-fiber ribbons.
Optical Light Sources OLS 1-1C OLS1-2C OLS1-DUAL Optical Light Source The OLS1 is a cost-effective, rugged, handheld LED light source for performing insertion loss measurements on fiber optic links when used with an optical power meter. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements.
OTDR’s OptiFiber® Certifying OTDR - Boost productivity with an easy-to-use interface & lightweight design. - Diagnose fiber cabling issues with integrated ChannelMap™, Auto OTDR and fiber endface inspection. - Certify fiber using integrated Auto OTDR analysis, automated loss and length measurements and fiber end-face inspection. - Enhance visibility into premise, campus & metro networks. - Document fiber with LinkWare data management & report software.
Rack Mount Interconnect Center RIC3 enclosures are designed for enhanced fiber management & ease of use. They are compatible with an array of Siemon fiber Quick-Pack adapter plates for your choice of fiber adapters & port density. Height: 86.6mm (3.41”) Width: 432mm (17.00”) Depth: 380mm (14.95”) Height: 86.6mm (3.41”) Width: 432mm (17.00”) Depth: 380mm (14.95”) RIC3-24-01 24-96-port rack mount interconnect center, 2 RMS $245.00 RIC3-36-01 36-144-port rack mount interconnect, 2 RMS Height: 133mm (5.
Secure Keyed LC Fiber System Leviton’s Secure Keyed LC Fiber System prevents unauthorized and inadvertent changes in highly sensitive government applications such as data centers, telecommunications rooms, workstation areas, and secure IT networks, creating an ideal “lock-in” system. Once connected to a port, the patent pending locking design prevents removal by hand, and the connector can only be removed with a keyed color extraction tool. 8 keyed colors are available.
Cable IQ Qualification Tester CableIQ is the first qualification tool designed for network technicians who need to troubleshoot connectivity problems and qualify cabling bandwidth. It sees if your cabling is qualified to support 10/100, VoIP or Gigabit Ethernet. Detects speed/duplex settings of attached switches and PCs. Intelligent wiremap graphically shows distance to faults. Intuitive, lightweight, and rugged.
LinkRunner Series The LinkRunner quickly verify and troubleshoot network drops with the essential personal tool.. View link, speed, duplex, cable length, switch port, PC NIC response & ping key devices. The LinkRunner Pro & Duo are the first frontline tools to establish links at Gigabit speeds. That means technicians have the power to troubleshoot Gigabit link problems before they’re escalated. Use LinkRunner Pro for Copper & LinkRunner Pro Duo for both Copper and Fiber.
DTX CableAnalyzer Series Category 6 Cable Analyzers are Three times faster than existing testers with 9-second Cat 6 Autotest. It all starts with 9-second Cat 6 Auto test that means you can meet TIA-568-B certification requirements and receive structured cabling warranties much faster than ever before. With all this speed also comes increased accuracy. The DTX is the only independently verified TIA Accuracy Level IV tester to obtain UL accuracy classification.
SignalTEK™ & SignalTEK-FO™ SIGNALTEK provides a technically innovative method to test and document performance of voice, data, and VoIP applications for cabling installers and network technicians. It tests the link’s ability to support applications by transmitting Ethernet packets on wire and measuring the link performance according to IEEE802.3ab Gigabit Ethernet standard. By monitoring transmitted and received data packets, it can report BERT (Bit Error Rate Test) for the link.
LanScaper PRO Network Tester LanscaperPRO™ combines the functions of a high-end cable tester and length measurement device with the capability to identify, monitor and correct LAN issue associated with physical layer and link condition in the network.
Validator PRO™ & PRO-NT™ Building on the capabilities of the Validator & Validator-NT, the JDSU ValidatorPRO™ series of Ethernet Network Management Tools offers a solution to test copper and fiber Ethernet cables. The ValidatorPRO™ Ethernet speed certifier with integrated optical power meter and accompanying Plan-Um® cable management software delivers the power to test both copper and fiber cabling, determine if cables can support Gigabit Ethernet, and perform troubleshooting for cable installations.