Signamax Connectivity Systems 100BaseTX to 100BaseFX Media Converter Model 065-1100NS Mode 065-1110NS Mode 065-1120NS Series U S E R ’ S G U I D E
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Signamax Connectivity Systems 100BaseTX to 100BaseFX Media Converter Series 065-1100NS 065-1110NS 065-1120NS User’s Guide
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter FCC Warning This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Trademarks Product names mentioned in this manual may be trademarks or registered trademarks of those products and are hereby acknowledged. • Ethernet is a trademark of Xerox Corporation. • Microsoft Windows Corporation. • Signamax TM Connectivity Systems is a trademark of Advanced Electronic Support Products, Inc.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter T ABLE OF CONTENTS CHAPTER 1: INTRODUCTION… … … … … … … … ABOUT THIS GUIDE.................… … … … … … … … WELCOME.................… … … … … … … … … … … … PURPOSE.................… … … … … … … … … … … … . TERMS/USAGE...........… … … ......… … … … … … … FEATURES .................… … … … … … … … … … … … SPECIFICATION.................… … … … … … … … .… . PACKAGE CONTENTS.................
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter APPENDIX C: APPLICATION DIAGRAM… … … … … … … … … … … … APPLICATION DIAGRAM I… … … … … … … … … … … . APPLICATION DIAGRAM II… … … … … … … … … … … APPLICATION DIAGRAM III… … .… … … … … … … … .. 17 17 17 18 CONTACT INFORMATION… … … … … … .… ..… … .
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter 1 INTRODUCTION About This Guide Welcome Thank you for choosing the 100BaseTX to 100BaseFX Media Converter. This device integrates Fast Ethernet copper and fiber segments in a highly flexible package. Purpose This guide discusses how to install and configure your 100BaseTX to 100BaseFX Media Converter.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Features • Complies with EIA/TIA and IEEE standards • Complies with IEEE 802.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Specifications Standard: IEEE 802.3u Connector: 1 x ST or SC fiber optic 1 x RJ-45 Max.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Package Contents The 100BaseTX to 100Base-FX Converter packaged should include: • One converter • One AC adapter (for external power supply) • Four pieces self-adhesive pads • One user’s manual Introduction 4
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter 2 HARDWARE DESCRIPTION Product Overview The Converter is primarily designed for larger workgroups, demanding more speed and bandwidth, and requiring expansion of the Fast Ethernet network. It features a MDI/MDI-X crossover “push button” switch for direct connection to the workstation, switch or hub.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Front Panel View with SC and RJ-45 Connectors Front Panel View with ST and RJ-45 Connectors Hardware Description 6
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter 3 INSTALLATION Installing Your Converter In this chapter, we will take a look at how to install converters within its operating environment. First, it is important to unpack the Converter and ensure that all the components listed in Package Contents are present.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter 2. Install the Converter in a location free from strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight. 3. Leave at least 10 cm of space at the front and rear of the unit for ventilation. 4. Affix the provided rubber pads to the bottom of the Converter for grip, and to protect the case from scratching.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter NWay Push Button Switch Setting Use the NWay push button switch to activate NWay operations. Note: Factory NWay switch default is set to the ON position. ON: Activates the NWay auto-negotiation operation mode. Set the NWay switch to ON when connecting to an auto-negotiation device. The function will determine the highest possible speed and duplex mode in the copper segment. OFF: Deactivates the NWay auto-negotiation operation mode.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Install the converter This Converter utilizes ports with fiber and copper port connectors, functioning under the Fast Ethernet protocol. 100BaseTX Port The 100BaseTX port supports a network speed of 100Mbps, and can operate in half and full duplex transfer modes.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Desktop Installation Follow the instructions listed below to install the Converter onto a desktop location. 1. Locate the Converter in a clean, flat and safe position that has easy access to AC power. 2. Affix the four (4) self-adhesive rubber pads to the underside of the Converter 3. Apply AC power to the Converter. (The green PWR LED on the front panel should light) 4.
Signamax 3. 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Check the front-panel LEDs as the device is powered on to verify that the Power LED is lit. If not, check that the power cable is correctly and securely plugged in. Note: For International use, you may need to change the AC power adapter cord. You must use a power cord set that has been approved for the receptacle type and electrical current in your country.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Warning Because invisible laser radiation may be emitted from the aperture of the fiber port when no cable is connected, avoid exposure to laser radiation and do not stare into the open apertures. Connecting Copper Cable The 100BaseTX RJ-45 Ethernet port fully supports auto-sensing and auto-negotiation. 1.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter 4 LED INDICATORS This Converter has LED indicators located at the front of the device. The LEDs have been designed to give easy at-a-glance network status, and provides ‘real-time’ connectivity information.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter A APPENDIX A Cables The following are some recommendations as to what you should and should not do when installing cables. Remember - cables are the deciding factor in network performance. mm 24 6mm Try to maintain a bend radius of (min.) 4x the diameter of the cable for UTP and 100x for fiber. Place cable ties at regular intervals - do not over tighten cable ties - try to avoid using with fiber.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter B APPENDIX B About RJ-45 Cables When connecting your network devices, use standard Category 3 eight-way cables for 10Base-T configurations and Category 5 cable for 100BaseTX.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter C APPENDIX C Application Diagram I In the figure below, the Converter is functioning as a high-speed bridge between switches creating increased capacity for each user (node) on the local area network. It is providing a 100Mbps full duplex link to a variety of Fast Ethernet network devices within a LAN.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter Application Diagram III In the figure below, the Converter is functioning as a high-speed dedicated link within a campus network configuration. It is providing a 100Mbps full duplex link to a remote network node.
Signamax 065 -1100NS/1110NS/1120NS Series 100BaseTX/FX Media Converter D CONTACT INFORMATION SIGNAMAX CONNECTIVITY SYSTEMS An AESP Company 1810 N.E. 144th Street. North Miami, Florida 33181, U.S.A. Phone: 305-944-7710 Fax: 305-652-8489 Sales: 800-446-2377 Tech. Support: 800-446-2377, ext. 201 Http://www.signamax.com E-mail: info@signamax.com EUROPE AESP Ukraine. (UKRAINE) 2 Timiryazevskaya St. 47 252014 Kiev, Ukraine Phone: +380 44 296.53.57 Fax: +380 44 294.88.60 Http://www.aesp.com.