Notice: Signal Communications Limited reserves the right to make improvements to the product described in this manual at any time and without notice. This manual is copyrighted. All rights are reserved. This manual may not be copied, reproduced or translated in whole or part without prior consent from Signal Communications Limited Third party trademarks are the property of their respective holders, Copyright (c} 1995-98 Signal Communications Limited: All rights reserved. Version 2.
FCC Statement on Class B WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Table of Contents INTRODUCTION » INSTALLING 7e/eEye Dro What You Need System Connections Software Installation Registering the Transmission Unit Connecting Feminine to Eyeteeth Pro Alarm Port Definition Pin Definitions for Null Modem Cable Transmitter Unit SPECIFICATIONS Model: PTA-Be and PACT
SECTION —1 INTRODUCTION Eyelet Pro is an advanced Video Monitoring System, The transmission unit is especially designed for monitoring medium sized firm, factory and warehouse. Four models are available to suit for different applications. PTA-Be is monitoring systems transmitting B/W video frames. PTA-Ce functions as standard model for the transmission of color video. PTA-Be and PTA-Ce supports up to 4 alarm inputs and 1 output switch.
SECTION 2 INSTALLING Eyeteeth Pro What You Need To install and operate the Eyeteeth Pre transmission unit, the following items are required: » Jelly Pro Transmission Unit The image transmitter supports up to 4 video sources in all PAL or MTS format, o CCD Camera Color / monochrome, PAL or SCENT.
System Connections Upton 4 caner Hainan cove {EM Compatible Recommended Setup Procedures: Step 1: Plug one end of the Null Modem cable info the socket marked MODEM on the Step 2: Step 3: Step 4: Step 5: Eyelet Pre transmitter, then plug the other end to the COM port of the computer.
Software Installation Before setting up Ewing, please change the video setting to 800 x 600 true color or 16-bit high color in Wind's Display Properties: Telephony software contains an installation program, SETUP EXE. Please use this program to setup the necessary files info the hard disk of the reception unit, Once you have completed the following installation procedure, you can run Telling directly from your hard disk.
Connecting Winter to Eyelet Pre steeple: Make sure you video setting of Win environment is 800 x 608 true color or 800 x 600 16-bit High Co lour. To start Winter Reception Software: click on the gg, bunion on the taskbar, then choose Programs -> Eyelet Pre _. Teleology Pre rs-AD-1. Step: To connect to the Eyeteeth Pr , click Connect under the Conception Men or the Connect icon.
Transmission Unit The panels of the Eyeteeth Pre transmission unit are shown below Eyelet > . [Spe Front Panel Functional Description Rear Panel for PTA-BI and PTA-Ce VIDEO IN Connectors (CHI — CHA) Standard BNC connectors for the video sources A composite video signal should be supplied to these connectors ALARM IN Connector ~ This connector is used for connecting 1 remote control switches and 4 alarm inputs.
SECTION 3 SPECIFICATIONS MODEL PTA-CI PTA-BI STANDARD (Py: PARRICIDAL, 625 LINES, 50 FIELDS PER SECOND (N): NETSCAPE, $25 LINES, 60 FIELDS PER SECOND INTERFACE 4 CHANNELS, 1.