Notice: Signal Communications Limited reserves the right to make improve described in this manual at any time and without notice. nets to the product This manual is copyrighted. All rights are reserved. This manual may not be copied, reproduced or translated in whole or part without prior consent from Signal Limited, is a trademark of Signal Communications Limited and is registered in US and other countries. All other trademarks are the property of their respective owners.
FCC Statement on Class B WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment, NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents SECTION 1 INTRODUCTION SECTION 2 INTERFACE DESCRIPTION INSTALLING VRT What You Need System Connections About the Reception Software Software Installation Connecting to VRT Operation Pin Definitions for RJ45 LAN Cable NARMADA
SECTION 1 INTRODUCTION eyelet H+ Video Recording Transmitter (VRT) is a one-plug module on LAN and the Internet for remote video monitoring and recording. VRT provides simultaneous remote monitoring, recording and playback, Users can keep track of live video and play back recorded video from any remote locations.
SECTION 2 INTERFACE DESCRIPTION Model: V-16168 free Eyelet, Video Recording Transmitter 16 Cam . Functional Descriptions VIDEO INPUT Connectors V-16168: CH1 CH Standard BNC connectors for color and black&white video sources A composite video signal should be supplied to these connectors ‘Line lock™ camera(s) is(are) recommended to be used. ALARM & SWITCH Port 4 remote control switches are available for all the models. V-16168: 16 alarm sensors All alarm channels have the same priority.
Ethernet Socket (10/100 Base-T) This socket is used for connecting VRT to the corporate computer network (e.g. LAN) . li i tus COL LED, when on, indicates that collision is occurring on the network, LINK LED, when on, indicates that VRT is connecting to the network and ready to function. AUX & MODEM Port These two ports are used for future development. Power Jack A 2.1mm D.C. power jack for the connection to the power supply (12V D.
SECTION INSTALLING VRT What You Need To install and operate the VRT transmission unit, the following items are required: o Jeffery Ill+ VRT Transmission Unit The image transmitter supports up to 16 video sources in all PAL or SCENT format. o CCD Camera Color / monochrome, PAL or SCENT. * Coaxial Cable (GR-59 recommended) It is used to connect the video output of the CCD camera to the video input of VRT transmission unit.
System Connections NORMAL OPEN/CLOSE SWITCHES & DRY CONTACT RELAY SWITCHES RS8232 CABLE RS232 CABLE J RJ45 CABLE 12VDC 5A /£ \ ADAPTER Eyelet III Video Recording Transmitter (VRT) Pr ri VIDEO CAMERAS Step 1: Plug one and of the RJ45 LAN cable into the socket marked Ethernet on the VRT transmitter, then plug the other end to the Ethernet socket of the computer.
About the Reception Software Teleworking Reception Software is a Windows 95/98/ME/NT/2000/XP application program (IBM compatible PC). It implements the system controls as well as image decoding of the VRT transmitter. The compressed data are decoded and displayed through the PC monitor. Software Installation Before setting up please change the video setting to 800 x 600 true color or 16-bit high color in Window's Display Properties. Tell in software CD contains an installation program, SEXTUPLET.
‘You may enable/disable recording by clicking the VRT REC button. You may playback the recorded video by clicking the Remote Retrieval under the Remote menu. You may change the video mode from remote retrieving to monitoring by clicking the Remote Monitoring under the Remote menu. ble Shooting: If you encounter problem in connecting the VRT transmitter, you should check the following, Please make sure your PC has a network card and is configured with network settings.