SDL1000X Series DataSheet-2019.
SDL1000X Programmable DC Electronic Load Main Feature SDL1020X SDL1020X-E SDL1030X SDL1030X-E SDL1020X (Single channel ): DC 150 V/30 A, total power up to 200 W SDL1030X (Single channel ): DC 150 V/30 A, total power up to 300 W 4 static modes / Dynamic mode: CC/CV/CR/CP CC Dynamic mode: Continuous, pulsed, toggled CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode: 0.
SDL1000X Programmable DC Electronic Load Design Features Dynamic test mode up to 25 kHz (CC) Steady state operating mode The SDL features four operating modes to provide flexible test The transient test allows switching between two different load values. capabilities. In CC mode, the electronic load will sink a constant current, A common application is to test the dynamic characteristics of a DC regardless of the voltage at its terminals.
SDL1000X Programmable DC Electronic Load Program function Battery discharge function In program (auto-test) mode, you can generate a sequence of tests The SDL1000X can also provide insight into battery performance by using different modes, mode parameters and durations. This function analyzing the discharge characteristics of the DUT. The SDL features is useful for automatically executing a set of tests on a device then three stop conditions for the discharge test: Voltage, capacity or time.
SDL1000X Programmable DC Electronic Load Voltage Rise/Fall speed test Voltage threshold function The electronic load is also equipped to directly measure voltage rise The SDL1000X can be set to turn on or off if the input voltage is at, and fall times. It can calculate the time from one voltage to another above, or below a set value. By defining these thresholds, you control without the need for additional measurement instrumentation. With an when the load is active.
SDL1000X Programmable DC Electronic Load Specifications Unless otherwise noted, all specifications are guaranteed within the temperature range of 25°C ± 5 °C with warm-up time of 30 minutes. Model Input Rating (0~40 ℃ ) CV Mode CC Mode CR Mode *1 CP Mode *3 SDL1020X Input voltage 0~150 V Input current 0~5 A Input power 200 W Minimum Operating Voltage (DC) SDL1020X-E 0~30 A 0~5 A 0~30 A 0.15 V at 5 A 0.9 V at 30 A 0.15 V at 5 A 0.
SDL1000X Programmable DC Electronic Load Protection Range OPP 210 W OCP 5.1 A 31 A 5.1 A 31 A OVP 41 V 155 V 41 V 155 V OTP 85 ℃ Battery Measurement Battery Input: 0.5~150 V; Max Measurement: Capacity=999 AH Resolution=0.1 mA;Time Range=1 s~24 H Input Resistance >200 kΩ Dimension 256 * 115 * 410 (WxHxD mm) Weight 5.
SDL1000X Programmable DC Electronic Load Readback Current Readback Power Range 0~5 A Resolution 0.1 mA 1 mA Accuracy ± (0.05%+0.05% FS) 50 ppm/℃ ± (0.05%+0.05% FS) 50 ppm/℃ Range 300 W Resolution 10 mW Accuracy ± (0.1%+0.1% FS) Range 0.03 Ω~10 KΩ Resolution 0.001Ω 0~30 A 0~5 A 0~30 A Readback Resistance Protection Range OPP 310 W OCP 5.1 A 31 A 5.1 A 31 A OVP 41 V 155 V 41 V 155 V OTP 95 ℃ Battery Measurement Battery Input: 0.
SDL1000X Programmable DC Electronic Load Product information Product No 150 V/30 A 200 W Programmable DC Electronic Load SDL1020X/SDL1020X-E 150 V/30 A 300 W Programmable DC Electronic Load SDL1030X/SDL1030X-E Standard Accessories USB Cable -1 Quick Start -1 Calibration Certificate -1 Power cord -1 Optional accessories 30 A Test Lead Accessories Description Model 30 A Test Lead Maximum Current 30A Maximum Voltage 150V Terminal M6/M6 Wire Gauge AWG 10 Length 1010±10mm Exterior Design War