SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 SIGFOX SBS-T-902 v2.2 Product Specification APPROVED: AUTHOR SIGN-OFF SIGNATURE #1 P. ANTOINE S. BARREIRO SIGN-OFF SIGNATURE #3 SIGN-OFF SIGNATURE #4 © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 Table of contents 1 SIGFOX technology ..................................................................................................................... 4 2 Base station synoptic .................................................................................................................... 4 3 Installation synoptic .........................................................................................................
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 Changes description Version 1.0 1.1 2.0 Description Author P. ANTOINE S. BARREIRO S. BARREIRO Creation Correction antenna gain Correction on FCC ID Date 18/05/2016 06/10/2106 11/10/2106 Acronyms Acronym ETH LNA PVC RF SAT TAP VSWR Description Ethernet Low Noise Amplifier Polyvinyl Chloride Radio Frequency Satellite Transfox Access Point Voltage Standing Wave Ratio © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification 1 Ref.: Rev.: 2.0 Date:06/10/16 SIGFOX technology SIGFOX is the first and only operator of a cellular network fully dedicated to low throughput communication for connected objects. With an extremely cost effective and very low energy consuming out-of-the-box connectivity offer, SIGFOX brings a revolution to the world of Internet of Things and M2M. The network, which already connects tens of thousands of objects, is being rolled out worldwide.
SIGFOX SBS-T-902 v2.2 Product Specification 4 Ref.: Rev.: 2.0 Date:06/10/16 Installation site recommendations This base station has been developed to be installed in indoor. It must be used with an LNA. It can be used also with a cavity filter. The datasheets of LNAs for 902-928MHz operation is in annex 1. The datasheets of LNAs for 868.13MHz operation is in annex 2. 4.1 Cavity filter option The cavity filter use is optional in some countries. Cavity Filter LNA V2 Antenna Base station 15 4.1.
SIGFOX SBS-T-902 v2.2 Product Specification 5 Ref.: Rev.: 2.0 Date:06/10/16 Datasheet © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification 6 Ref.: Rev.: 2.0 Date:06/10/16 Warning statements 6.1 FCC warning statement This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Conformément à la règlementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inferieur) approuvé pour l'émetteur par Industrie Canada.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 N male connector Earthing kit Zip tie-wraps Surge surpressor Earthing kit TAP Cable tray 9.1 Earthing the base station In order to protect the station, it must be earthed with a G/Y 6mm2 wire (or AWG9). First you need to insert a grower washer or a lock washer and a grounding lug into a hexagon socket screw M4x10. And then you must screw it into the hole provided for this purpose on the side of the station.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 DEL Status Electrical connection on the rear panel Example of base station © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 Green Led « Power » : Green Led lights => The base station is ON (TRANSFOX and PC are ON). Green Led Off => The base station is OFF (TRANSFOX and PC are OFF). Green Led Flash => The base station will restart or shutdown (after 60 sec max).
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 10 Labels 10.1 SIGFOX Identification 10.2 CE © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 10.3 FCC © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 11 Annexe 1: LNA 902-928MHz © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 12 Annexe 2: LNA 868.13MHz © Copyright SIGFOX.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 13 Annexe 3: Cavity filter 13.1 Electrical Specification REQ 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Parameter Center Frequency Bandwidth Insertion Loss Ripple Rejection 1 Rejection 2 Return loss Power Handing Impedance Specification 922.5 4 1,8 @ 923,2MHz 0.5 45@500~916.5MHz 35@928~1500MHz 18 40 50 Remark MHz MHz dB typ dB max dBc min dBc min dB min dBm ohm In band 13.1.1 Summary 2 dB F :920,5M Hz F :924.5M Hz F :916.
SIGFOX SBS-T-902 v2.2 Product Specification Ref.: Rev.: 2.0 Date:06/10/16 13.2 Mechanical specification REQ 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 Parameter Input Connect Output Connect Environment Operation Temp Storage Temp Weight Dimension ( W*L*H ) Mounting hole ROHS Finish Specification N – Female N – Female IP 65 -40 to +70 -55 to +105 850 134 x 82 x 49 94 x 73.7 ( M4x0.7) Yes Black painting Remark °C °C gr max mm max mm 13.3 Label Specification REQ 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.
