Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec 2016 SIGFOX SBS-T3 PRODUCT MANUAL APPROVED: AUTHOR SIGN-OFF SIGNATURE #1 P. ANTOINE S. BARREIRO SIGN-OFF SIGNATURE #3 SIGN-OFF SIGNATURE #4 SIGN-OFF SIGNATURE #2 SIGN-OFF SIGNATURE #5 Note: Only the last version of this document available on the SIGFOX technical system documentation is official and applicable. This document is confidential and is the property of SIGFOX.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 CHANGES DESCRIPTION Version Description Author Date 1.0 Creation H. Ardiller 18/10/2016 1.1 Modification L.Bordes 02/11/2016 1.2 Corrections content and form A. Trombetta 14/11/2016 1.3 Update sbs datasheet A. Trombetta 16/11/16 1.4 Modification BS name A. Trombetta 22/11/16 1.5 Remove labels section S. Barreiro 22/11/16 1.6 LNAC datasheet updated A. Trombetta 05/12/16 S.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Table of Contents 1. 2. 3. Installation recommendations .................................................................................................. 5 1.1 Base Station synopsis ......................................................................................................... 5 1.2 Installation synopsis ..................................................................................................
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Annexes ................................................................................................................................................ 19 Annex 1: antenna specification ................................................................................................... 19 Annex 2: LNAC-902 .................................................................................................................
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 1. INSTALLATION RECOMMENDATIONS 1.1 Base Station synopsis Sigfox base stations operate on reception on a specific frequency bandwidth used by sigfox terminals. They are also able if necessary to transmit information to do single or multi-cast back to these terminals. The base stations include a complete system described in the following synopsis.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 1.2 Installation synopsis ANTENNA OPTIONAL AC/DC AC LNAC DC FEEDER CONNECTIVITY Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 6 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 1.3 Installation site recommendations This base station has been developed to be installed in indoor or outdoor with plastic shell. It must be used with an LNA or LNAC. It can be used also with a cavity filter. The datasheets of LNACs for 902MHz operation is in annex 2. The datasheets of LNACs for 922MHz operation is in annex 3. The datasheets of LNACs for 868 MHz operation is in annex 4.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 2. WARNING STATEMENTS / KEY RISKS 2.1 FCC Warning statement This device complies with Part 15 of the FCC Rules and with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Conformément à la règlementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inferieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 2.4 Mexico warning statement 'La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada'.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 3. BILL OF MATERIAL 3.1 Base station Datasheet Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 12 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 3.2 LNAC choice The LNAC can provide only RX rejection or RX and TX. In some countries TX rejection is mandatory to comply with out of band emissions and a specific LNAC must be used. These regulatory obligations are described below. 3.2.1 New Zealand and Japan In New Zealand and Japan this base station must be installed with LNAC-922-TX described in annex 3. 3.3 Antenna and feeder 3.3.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 3.3.2 Feeder For outdoor antenna installation, the type of coaxial cable will depend of site configuration (distance from the antenna). It is fixed on the RF connector. 4. ELECTRICAL CONNECTION The base station must be connected to a power point with electrical protection according to standards. The base station can operate with DC supply voltage (limits 10.5 to 14.0 V) or with AC to DC adapter.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Base station earth point is marked with following symbol: 4.1.1 Earthing the base station In order to protect the station, it must be earthed with a G/Y 6mm2 wire (or AWG9). First you need to unscrew the bolt M4 to insert a grounding lug into the HC screw M4x20 and the over the 2 washers already in place. The correct tightening torque is of 2.2 N.m. If needed, you can bend the lug to ease the insertion of the wire.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 4.2 Electrical connection Maintenance port Earth 4.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 5. WATERPROOFNESS Coaxial cable, connectors, and overall cables, performance and lifetime strongly depend on waterproofness level. The main purpose of ensuring waterproofness is to avoid the direct contact with water and thus prevent connectors oxidation and also protect against steam, salt and dust. The connectivity cover insures the waterproofness of the base station itself.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Cover location Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 18 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 ANNEXES Annex 1: antenna specification Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 19 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Annex 2: LNAC-902 Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 20 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 21 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Annex 3: LNAC-922-TX Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 22 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 23 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Annex 4: LNAC-868 Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 24 / 25 Copyright sigfox® sigfox.
Ref.: GEN-HWA-PTS12 Rev.: V1.7 SIGFOX SBS-T3 PRODUCT SPECIFICATION Date: 06 dec, 2016 Sigfox 425 rue Jean Rostand 31670 Labège FRANCE 25 / 25 Copyright sigfox® sigfox.