Owner's Manual

1911 SEMI-AUTOMATIC CO
2
STEEL BB PISTOL
OWNER’S MANUAL
STORAGE
• Before storing the CO
2
BB pistol, make sure the Safety is activated, the CO
2
BB pistol is unloaded, and the CO
2
is
removed.
• CO
2
BB pistols should be stored in such a manner as to protect against unauthorized use by children and others.
• These products are designed to look, handle and function like firearms.. These products should be stored in such a
manner to protect against theft and subsequent misuse.
• When Removing from storage or receiving from another person, make sure the safety is activated and there is no
ammunition in the magazine
SAFE USE AND HANDLING OF CO
2
CYLINDERS
It is possible that certain conditions may affect a CO
2
cylinder, which can impact its proper performance. These
conditions include the usage, maintenance and storage at temperatures that are higher or lower than normal outdoor
temperatures (59ºF/15ºC to 69.8ºF/21ºC). Rapid firing of the CO
2
BB pistol can affect the performance of the CO
2
cylinder as well.
1. High temperatures can increase pressure In the CO
2
cylinder and also within the gun, leading to higher than stan-
dard operating pressure. This excess pressure could cause the gun to malfunction or be permanently damaged.
Maximum storage or operation temperature should never exceed 122ºF (50ºC). This temperature can be reached
if you leave the gun under direct sunlight on a bright day. Thus, to ensure proper gun operation, do not expose it
or CO
2
cylinders to high temperatures or direct sunlight for long periods of time. Otherwise, the CO
2
cylinder could
overheat and explode, which could damage the BB pistol and cause injuries or death to people around it.
2. Fast consecutive shooting may produce a decrease of temperature in the gun, as well as the CO
2
cylinder. This
could result in lower projectile velocities and may even lower gas pressure enough so that the pistol will not fire.
This condition can be especially apparent when shooting in cold weather and can be avoided by allowing more time
between shots. This permits the gas to increase in temperature and pressure and produce normal velocities.
3. During rapid fire, the muzzle velocity to each shot will diminish. This can affect shooting accuracy and you will get
fewer shots per CO
2
cylinder.
4. Care should be exercised to ensure that the gun is not shot with a CO
2
cylinder that is low in pressure. Here are
some indicators of insufficient pressure:
A) The sound of the shot is not as loud as when the cylinder is full.
B) Reduced steel BB velocity, which may be signaled by the steel BB hitting the target, but in a lower position than it
would with a full CO
2
cylinder” (That is the shooting speed has dropped).
REPAIRS & RETURNS
A CO
2
BB pistol that is not functioning well can be dangerous. Do not attempt to repair the gun yourself, since this may
cause abnormalities in its functioning. Use the appropriate caliber cleaning rod (.177/4.5mm) if a steel BB has become
blocked in the barrel. Take no further action if it can not be removed. Call SIG SAUER” Customer Service at (603) 610-
3000 ext. 1.
In the event you need to return your CO
2
BB pistol to the SIG SAUER Service Department, here’s what to do:
1. First contact Customer Service at [phone] ext. 1 for a Return Merchandise Authorization (RMA) number,
which will allow SIG SAUER to track the status of your return from its receipt at SIG SAUER through its return to you.
Please do not send your CO
2
BB pistol until you obtain an RMA number.
2. Make sure that the magazines are unloaded and that no steel BB is included with your returned CO
2
BB pistol.
3. Make sure the CO
2
cylinder is removed from the CO
2
BB pistol.
4. Package the CO
2
BB pistol securely to prevent damage. Enclose a letter that includes your name, street address,
daytime phone number, model and serial number, and a detailed description of the problem you have experienced
or the work you want performed. With the exception of extra magazines, do not include any other accessories such
as scopes or mounts, or CO
2
cylinder.
5. SIG SAUER is not responsible for any CO
2
BB pistol until it is received, nor for damage incurred during shipment.
6. Ship your CO
2
BB pistol insured and prepaid (we do not accept collect shipments) to:
SIG SAUER, Inc.
Attention: Service Department
72 Pease Boulevard, Newington, NH 03801
Don’t forget to write your RMA number on the package.
IF YOU DO NOT UNDERSTAND THE INSTRUCTIONS FOR OPERATING YOUR CO
2
BB PISTOL, IT IS YOUR
RESPONSIBILITY TO CALL OUR CUSTOMER SERVICE DEPARTMENT AT [phone] EXT. 1 BEFORE USING
YOUR CO
2
BB PISTOL.
SIG SAUER
®
ONE (1) YEAR LIMITED WARRANTY
SIG SAUER warrants that the enclosed airgun was originally manufactured free of defects in material, workmanship
and mechanical function. For the period of one year, SIG SAUER agrees to correct any defect in the airgun for the
original purchaser by repair, adjustment or replacement, at SIG SAUER’s option, with the same or comparable quality
components (or by replacing the airgun at SIG SAUER’s option); provided, however, that the airgun is returned
unloaded and freight prepaid to SIG SAUER at 72 Pease Boulevard, Newington, NH 03801. Proof of purchase will be
required with any request for warranty repair. This one-year warranty is null and void if the airgun has been misused,
damaged (by accident or otherwise fired with improper ammunition, fired with an obstruction in the barrel, damaged
through failure to provide reasonable and necessary maintenance as described in the manual accompanying the
airgun, or if unauthorized repair or any alteration, including of a cosmetic nature, has been performed on the airgun.
This one-year warranty does not apply to normal wear and tear of any parts. Subject to the foregoing, this one-year
warranty confers the right to have the covered airgun or its parts repaired, adjusted or replaced exclusively upon
the original purchaser, which right is not transferable to any other person. This warranty does not apply to any
accessory items. This warranty is only valid for airguns purchased in the United States. IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT APPLICABLE, SHALL BE LIMITED IN
DURATION TO THE APPLICABLE PERIOD OF WARRANTY SET FORTH ON THIS PAGE. THE PURCHASER’S ONLY REMEDIES
IN CONNECTION OF THE BREACH OR PERFORMANCE OF ANY WARRANTY ON SIG SAUER ARE THOSE SET FORTH ON
THIS PAGE. IN NO EVENT WILL SIG SAUER OR ANY COMPANY AFFILIATED WITH SIG SAUER BE LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusions may not apply to you. This warranty give specific legal
rights, and you may also have the rights which vary from state to state.
CONTACT:
For questions concerning this product, please call Customer Service at 603-610-3000, option 1.
72 Pease Boulevard, Newington, NH 03801 • 603-610-3000
sigsauer.com
W
WARNING – READ THIS OWNER’S MANUAL COMPLETELY.
THIS CO
2
BB PISTOL IS NOT A TOY. TREAT IT WITH THE SAME RESPECT YOU WOULD A FIREARM. ALWAYS
CAREFULLY FOLLOW THE SAFETY DIRECTIONS FOUND IN THIS OWNER’S MANUAL AND KEEP THIS MANUAL IN A
SAFE PLACE FOR FUTURE USE.
W
WARNING – NOT A TOY. ADULT SUPERVISION REQUIRED. MISUSE OR CARELESS USE MAY CAUSE SERIOUS
INJURY OR DEATH. MAY BE DANGEROUS UP TO 274 YARDS (250 METERS).
THIS IS A HIGH POWERED CO
2
BB PISTOL INTENDED FOR USE BY THOSE 16 YEARS OF AGE OR OLDER. READ ALL
INSTRUCTIONS BEFORE USING. IT IS THE PURCHASER’S/USER’S RESPONSIBILITY TO CONFORM TO ALL LAWS
GOVERNING USE AND OWNERSHIP OF CO
2
BB PISTOLS.
W
WARNING – BB PISTOL SAFETY IS YOUR RESPONSIBILITY
THIS OWNER’S MANUAL IS DESIGNED TO ASSIST YOU IN LEARNING HOW TO PROPERLY USE AND CARE FOR
YOUR SIG SAUER CO
2
BB PISTOL. ONLY WHEN YOU ARE CERTAIN THAT YOU FULLY UNDERSTAND THIS MANUAL
AND CAN PROPERLY CARRY OUT ITS INSTRUCTIONS, SHOULD YOU PRACTICE LOADING AND FIRING YOUR CO
2
BB PISTOL WITH STEEL BBS IN THE MAGAZINE. THIS PRODUCT IS NOT A TOY. HAVING A CO
2
BB PISTOL IN YOUR
POSSESSION IS A FULL-TIME JOB; YOU CANNOT GUESS AND YOU CANNOT FORGET. YOU MUST KNOW HOW TO
USE YOUR CO
2
BB PISTOL SAFELY. IF YOU HAVE ANY DOUBTS ABOUT YOUR ABILITY TO HANDLE OR USE THIS
CO
2
BB PISTOL SAFELY, YOU SHOULD SEEK SUPERVISED INSTRUCTION.
SAFETY RULES
W
WARNING – BEFORE USING YOUR NEW SIG SAUER CO
2
BB PISTOL, YOU MUST TAKE THE TIME TO READ
AND UNDERSTAND THE FOLLOWING SAFETY RULES:
• Do not install a magazine which contains ammunition
into the gun until you are ready to shoot. If you do
install a magazine which contains ammunition into the
gun and then decide not to shoot, manually remove
the magazine from the gun.
• An unloaded, non-pressurized gun with an
“ACTIVATED” Safety is the safest condition in which to
possess or store an CO
2
BB pistol.
• Accidents happen fast, be cautious, shoot safe.
• Whenever you handle, transport, store, pressurize,
or clean a SIG SAUER CO
2
BB pistol, make sure the
Safety is “ACTIVATED” and there is no ammunition in
the magazine.
• Always use eye protection.
• Think first. Shoot second.
• Always point the CO
2
BB pistol in a safe direction.
Never point your CO
2
BB pistol at people or animals
even if it is not loaded.
• Always keep your fingers away from the trigger until
you are ready to shoot.
• Always be certain of what is behind your target.
Make sure your target does not conceal a person
or some object which could be harmed by the steel
BBs. Do not shoot at targets which allow ricochets or
deflections.
• Do not shoot into or at water.
• Never use drugs or alcohol while handling this
product.
• The CO
2
BB pistol and steel BBs should be kept in
separate and secured places.
• Do not walk, run, jump or climb when carrying a
loaded CO
2
BB pistol unless holstered. A loaded CO
2
BB pistol should never be carried Inside a vehicle.
• Never modify or alter your SIG SAUER CO
2
BB pistol.
Modification of the CO
2
BB pistol may cause it to mal-
function or make it unsafe and will void the warranty.
P/N 5700453-01 REV00
16SIG1930_1911_AirgunManual_Final_5700453-01 REV00.indd 1 6/16/16 12:02 PM