2.0 KILO ® KILO5K™ 7x25 mm LASER RANGEFINDER WITH BALLISTIC DATA XCHANGE™ OWNERS MANUAL 2.
sigsauer.com TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 General Operation . . . . . . . . . . . . . . . . . . . . . .
sigsauer.com CONTENTS: KEY FEATURES: • KILO5K™ Digital Laser Rangefinder • SIG SAUER’S Patent Pending Ballistic Data Xchange™ Technology utilizes, low energy Bluetooth with embedded Applied Ballistics Ultralight and the free BDX™ App to sync custom gun profiles and environmental conditions to your KILO® and pair your KILO to any BDX enabled riflescope or sight for shots out to 800 yards. • 7x25 mm monocular with SpectraCoat™ anti-reflection coatings for superior light transmission and optical clarity.
sigsauer.com PRODUCT IDENTIFICATION: LIGHTWAVE™ DSP TECHNOLOGY A - Power / Range Button B - Eyecup / Diopter Focus Adjustment C - Mode Button D - Lanyard Attachment Point E - Battery Compartment SIG SAUER’s proprietary Lightwave DSP engine leverages HyperScan – an advanced power management technique that provides the fastest refresh rate in scan mode (4 times per second) even at distances up to a mile.
sigsauer.com SIG SAUER BALLISTIC DATA XCHANGE 2.0 (BDX 2.0) SIG SAUER’s Patent Pending BDX system takes the guesswork out of determining the proper range and ballistics solution for hitting your target with the first round. Low Energy Bluetooth combined with an embedded ballistic calculator (Applied Ballistics Ultralight) allows the user to configure up to 25, custom bullet profiles on the free BDX App and sync to your KILO.
sigsauer.com GENERAL OPERATION OPERATION - ANGLE MODIFIED RANGE (AMR) AND LINE OF SIGHT (LOS) Your rangefinder provides 4 modes of operation: AMR, LOS, ABU and Ballistic Group Selection. When ABU is selected the user can pair the KILO with a nearby smartphone where the BDX App should already be installed. The user configures a bullet profile in the app, which is actively synced with a paired rangefinder. For example, the user downloads and installs the BDX App, selects a 0.
sigsauer.com ANGLE MODIFIED RANGE APPLIED BALLISTICS ULTRALIGHT (ABU) Your rangefinder has an embedded ballistics solver developed by Sig Sauer, Applied Ballistics and nVisti. By pairing your KILO with the free BDX App you can enter custom ballistics information for up to 25 bullet profiles and sync one at a time to your KILO. The active ballistic profile is now saved on your KILO, and when in ABU mode, will provide an accurate ballistic solution out to 800 yards maximum.
sigsauer.com PROJECTED, SEGMENTED ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAY A – Circle center aiming feature egr ds yar ge o an S) r LO ht ( f Sig o Line 8.6 f 56 d at 4 e clin in ees Example: LOS range = 568.6 yards with 0.308 Barnes Elevation adjustment = 18.19 MOA Up Windage adjustment = 7.
sigsauer.com W WARNING Safety and Operation Procedures The KILO is classified as a Class 3R product. SET UP Installing the Battery Remove the battery cap by turning the cap in a counter-clockwise direction. Insert (1) CR2 Primary Lithium battery positive side first. The (-) terminal should be facing out. Place the cap onto the (-) battery terminal and reinstall the battery cap by turning the cap in the clockwise direction. W CAUTION - Be careful to not cross-thread the cap.
sigsauer.com After installation of the battery and depressing the RANGE button, the status of the rangefinder is displayed: DIOPTER ADJUSTMENT The diopter or focus adjustment is integral to the eyecup. The focus adjustment is used to bring the display into sharp focus along with the target image. The diopter adjustment can turn clockwise or counterclockwise depending upon the user’s prescription EYECUP ADJUSTMENT Installing the Lanyard Install the lanyard loop through the lanyard attachment point.
sigsauer.com DISPLAY INFORMATION HyperScan MODE The display shows you the center aiming circle, the unit of measure (Y), Angle Modified Range mode (AMR) and the remaining battery status. The display will remain active for up to 30 seconds , or whatever timeout has been set within in the SIG BDX App. You can then press the RANGE button to determine range to target.
sigsauer.com CHANGING MODES OF OPERATION RANGEFINDER CONFIGURATION – PROGRAMMING SEQUENCE The rangefinder ships with the most common modes already configured. However, you can access and change the following features: Note – the rangefinder can more easily be programmed and configured by using the free Sig BDX App.
sigsauer.com 2. Target Selection (BEST or LAST) 4. Reticle Select BEST or LAST should be flashing (BEST is the default setting). You can toggle between BEST or LAST by pressing and releasing the RANGE button. Confirm your selection by pressing and releasing the MODE button which will save your setting and index to the next setting for configuration. If you do not press and release the MODE button the rangefinder will save your selection and turn off.
sigsauer.com save your setting and index to the next setting for configuration. If you do not press and release the MODE button the rangefinder will save your selection and turn off. The programming sequence for selecting a custom ballistic profile or ballistic group is grP1 > grP2 > grP3 > grP4 > grP5 > grP6 > grP7 > grP8 > APP > grP1. If you have previously configured a custom ballistic profile then APP should be flashing.
sigsauer.com 2. Download the BDX App from the App Store / Google Play Store 3. Launch the free SIG SAUER BDX App and Pair with your KILO (Enter your PIN code) Go to the App Store or the Google Play store and download the SIG SAUER BDX App. Search for the word SIG SAUER or BDX. On your smartphone, open the BDX App, click on PAIRING, turn on your KILO by pressing and releasing the RANGE button and then press “Scan for Devices” on the App. Your KILO should be listed below the KILO icon and “Select Device”.
sigsauer.com Make sure your KILO stays on during the pairing process by periodically pressing and releasing the RANGE button. You will be prompted to look through your KILO for a PIN number. Type this PIN number into the open dialogue box within the App. The PIN in your KILO and the PIN entered on your smartphone must match. Press OK to complete the pairing operation. You will now see your KILO ID in blue listed below the KILO icon. You can now exit this screen.
sigsauer.com 4. Configure up to 25 custom bullet profiles The BDX App allows you to create and modify up to 25 profiles. From the home screen of the App touch PROFILES. Only one profile can be active at any time and is denoted by the BDX Icon in blue to the right of the screen. The BDX App comes with one default 0.308 profile. You can edit this profile by touching “Profile 1” or create a new one by touching the “New Profile” in the upper right corner of the App.
sigsauer.com RANGEFINDER HEADS-UP DISPLAY (HUD) KILO SETTINGS From the home screen of your BDX App select RANGEFINDERS to display the HUD. The HUD displays all range, environmental and ballistic information and allows you to configure your KILO.
sigsauer.com TEMPERATURE AND ALTITUDE MUZZLE VELOCITY (MV) CALIBRATION Once your KILO is paired and actively synced with your smartphone, when you enter the RANGEFINDER HUD screen your smartphone will automatically pull the local temperature and altitude from the closest weather station. If you are not in cell range you can manually update both temperature and altitude by touching on the white numbers in each field and manually updating these environmental conditions.
sigsauer.com MUZZLE VELOCITY (MV) CALIBRATION (continued) CONFIGURING GLOBAL SETTINGS IN THE BDX APP Now enter the elevation offset between point of impact and point of aim and select CONFIRM. In this example the 3 shot group was 7 inches low. A new MV of 2477 fps was calculated. Select YES to confirm and this MV will now be used for ballistic solutions going forward. See the confirmation dialogue box in the image below right. From the Home Screen of the BDX App you can configure Global Settings.
sigsauer.com FREQUENTLY ASKED QUESTIONS (FAQ): Q: I can’t get the display to focus. A: You need to adjust the diopter ring to your vision. Rotate the eyecup / diopter ring in either direction until the display comes into sharp focus. Q: I can’t seem to range very far past trees or animals. A: Your KILO will perform differently based on changes in ambient conditions such as bright sunlight or snow, rain or fog, temperature and the reflectivity of the target being ranged.
sigsauer.com KILO5K™ 7x25 mm SPECIFICATIONS Magnification 7x Objective Clear Aperture 25 mm Exit Pupil 3.6 mm Eye Relief 15 mm Angular (FOV) FOV @ 100yds Laser Divergence Range Response Time Scanning Range Resolution Under 100 yds Max Range (Class 3R) Weight with Battery 42 A – 74.8 mm B – 103 mm C – 34.2 mm C B 6.78° 34.18 ft 1.4 MRAD .25 sec Yes A .1 yds Reflective up to 5,000 yds Trees up to 1,600 yds Deer up to 1,300 yds 7.
sigsauer.com W DANGER CLASS 3R LASER PRODUCT INVISIBLE LASER RADIATION - AVOID DIRECT EYE EXPOSURE This product complies with IEC 60825-1: 2014-05 Ed 3.0 and complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. 3R: P o < 20W, λ = 905 nm, t = 22 ns This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
sigsauer.com FCC STATEMENT: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
sigsauer.
sigsauer.
FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL 603-610-3000 27100 SW Parkway Avenue, Wilsonville, Oregon 97070 USA P/N 7402369-01 R01 sigsauer.