KILO ® KILO1600BDX™ 6x22 mm LASER RANGEFINDER WITH BALLISTIC DATA XCHANGE™ OWNERS MANUAL
TABLE OF CONTENTS Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
sigsauer.com INTRODUCTION Congratulations on the purchase of your SIG SAUER® Laser Rangefinder. Your KILO® is one of the most compact, advanced and simple to use rangefinders on the market. All of Sig Sauer’s rangefinders feature the fastest digital signal processing engine while streamlining the user interface for a no hassle, out of box experience.
CONTENTS: • KILO1600BDX™ Digital Laser Rangefinder • CR2 Battery (1) • Premium Padded Ballistic Nylon Case • Lanyard • Quick Start Guide 4
sigsauer.com KEY FEATURES: • SIG SAUER’S Patent Pending Ballistic Data Xchange™ Technology utilizes, low energy Bluetooth with embedded Applied Ballistics Ultralight and the free BDX™ App to sync custom gun profiles and environmental conditions to your KILO® and pair your KILO to any BDX enabled riflescope or sight for shots out to 800 yards. • 6x22 mm monocular with SpectraCoat™ anti-reflection coatings for superior light transmission and optical clarity.
PRODUCT IDENTIFICATION: A B A- Power/Range Button B- Eyecup / Diopter Focus Adjustment C- Mode Button D- Battery Compartment E- Lanyard C E D 6
sigsauer.com LIGHTWAVE™ DSP TECHNOLOGY SIG SAUER’s proprietary Lightwave DSP engine leverages HyperScan – an advanced power management technique that provides the fastest refresh rate in scan mode (4 times per second) even at distances up to a mile. Our DSP engine uses the latest generation field programmable gate array (FPGA) running sophisticated signal processing algorithms to reduce false positives while finding weak or distant targets.
SIG SAUER BALLISTIC DATA XCHANGE (BDX) SIG SAUER’s Patent Pending BDX system takes the guesswork out of determining the proper range and ballistics solution for hitting your target with the first round. Low Energy Bluetooth combined with an embedded ballistic calculator (Applied Ballistics Ultralight) allows the user to configure up to 25 bullet profiles on the free BDX App and sync to your KILO.
sigsauer.com GENERAL OPERATION Your rangefinder provides 3 modes of operation: AMR, LOS and ABU. AMR and LOS will be explained on the next page. When ABU is selected the user can pair the KILO with a nearby smartphone where the BDX App should already be installed. The user configures a bullet profile in the app, which is actively synced with a paired rangefinder. For example, the user downloads and installs the BDX App, selects a 0.
APPLIED BALLISTICS ULTRALIGHT (ABU) Your rangefinder has an embedded ballistics solver developed by Sig Sauer, Applied Ballistics and nVisti. By pairing your KILO with the free BDX App you can enter custom ballistics information for up to 25 bullet profiles and sync one at a time to your KILO. The active ballistic profile is now saved on your KILO, and when in ABU mode, will provide an accurate ballistic solution out to 800 yards maximum.
sigsauer.com S t (LO Line igh of S 8 f 56 eo ng ) ra t4 ds a ar .6 y ne ncli es i re deg Example: LOS range = 568.6 yards with 0.308 Barnes Elevation adjustment = 18.19 MOA Up Windage adjustment = 7.
MODES OF OPERATION - ANGLE MODIFED RANGE (AMR) AND LINE OF SIGHT (LOS) Angle modified range is the equivalent horizontal range to the target and is comparable to the “horizontal leg” of a triangle. AMR is also known as “rifleman’s rule” and uses the LOS range and angle of incline to calculate the horizontal distance the projectile travels between shooter and target. AMR is very accurate for shorter distances (i.e. < 400 yards) and archery. Line of sight is the range to the target independent of angle.
ANGLE MODIFIED RANGE sigsauer.
LUMATICTM OLED DISPLAY The KILO1600BDX™ has the most advanced display on the market. Our transparent OLED display has the largest dynamic range providing for high brightness in bright sunlight or snow conditions, yet will dim down to near night vision levels at dusk and dawn. No other display offers this adaptive ability to prevent your pupil from constricting in low light causing you to no longer be able to see your target.
sigsauer.com TRANSPARENT ORGANIC LIGHT EMITTING DIODE DISPLAY (T-OLED) The KILO1600BDX™ rangefinder features a T-OLED display for superior performance in any ambient light environment.
W WARNING Safety and Operation Procedures The KILO is classified as a Class 3R. • Do not press the RANGE button while aiming at the human eye or while looking into the transmitting optics on the objective side. • Do not leave the KILO within reach of small children. • Do not take the product apart or modify the product in any way to expose internal electronics that might cause damage or electric shock. • Do not use any other power source other than a CR2 battery or equivalent.
sigsauer.com OPERATION The KILO1600BDX is designed to get you up and running without the typical complexity of buried menus and programming modes.
SET UP Installing the Battery Remove the battery cap by turning the cap in a counter-clockwise direction. Insert (1) CR2 Primary Lithium battery (-) terminal side first. The (+) terminal should be facing out. Place the cap onto the (+) battery terminal and reinstall the battery cap by turning the cap in the clockwise direction. W CAUTION - Be careful to not cross-thread the cap.
sigsauer.com After installation of the battery and depressing the RANGE button, the status of the rangefinder is displayed: Installing the Lanyard Install the lanyard loop through the lanyard attachment point. Pass the lanyard back through the loop for secure attachment.
Diopter Adjustment The diopter or focus adjustment is integral to the eyecup. The focus adjustment is used to bring the display into sharp focus along with the target image.
sigsauer.com DISPLAY INFORMATION The display shows you the center aiming circle, the unit of measure (Y), Angle Modified Range mode (AMR) and the remaining battery status. The display will remain active for up to 30 seconds , or whatever timeout has been set within in the SIG BDX App. You can then press the RANGE button to determine range to target.
HyperScan MODE While the rangefinders support single button push ranging operation, it is highly recommended that you push and hold the RANGE button down to activate HyperScan mode. This mode allows you to scan targets at 4X/second which significantly improves ranging performance at extreme distances. As the ranging distances are updated very quickly in HyperScan mode, once you release the RANGE button the last acquired distance will be displayed.
sigsauer.com RANGEFINDER CONFIGURATION – PROGRAMMING SEQUENCE Note – the rangefinder can more easily be programmed and configured by using the free Sig BDX App. 1. Mode Selection (AMR, LOS or ABU) To enter programming mode, press and release the RANGE button to wakeup the rangefinder. Once the display is visible, press and hold the MODE button for 2 seconds – then release the MODE button and the current selection will be flashing (AMR is the default setting).
be detailed later in the instructions. 2. Target Selection (BEST or LAST) BEST or LAST should be flashing (BEST is the default setting). You can toggle between BEST or LAST by pressing and releasing the RANGE button. Confirm your selection by pressing and releasing the MODE button which will save your setting and index to the next setting for configuration. If you do not press and release the MODE button the rangefinder will save your selection and turn off.
sigsauer.com change the illumination setting. 4. Unit of Measure Selection (Y or M) Your current selection will be flashing (Yards is default). You can toggle between Y or M by pressing and releasing the RANGE button. Confirm your selection by pressing and releasing the MODE button which will save your setting and index to the next setting for configuration. If you do not press and release the MODE button the rangefinder will save your selection and turn off.
DIGITAL BALLISTICS XCHANGE – DOWNLOADING AND CONFIGURING THE FREE BDX APP In this section you will download the BDX App, pair the App with your KILO and create a custom bullet profile. 1. Turn Bluetooth on Check in Settings on your Android or iOS device to make sure that Bluetooth is on. If Bluetooth is off, switch it on.
sigsauer.com 2. Download the BDX App from the App Store / Google Play Store Go to the App Store or the Google Play store and download the SIG SAUER BDX App.
word SIG SAUER or BDX. 3. Launch the free SIG SAUER BDX App and Pair with your KILO (Enter your PIN code) On your smartphone, open the BDX App, click on PAIRING, turn on your KILO by pressing and releasing the RANGE button and then press “Scan for Devices” on the App. Your KILO should be listed below the KILO icon and “Select Device”. Your rangefinder ID should be listed in white letters.
sigsauer.com Make sure your KILO stays on during the pairing process by periodically pressing and releasing the RANGE button. You will be prompted to look through your KILO for a PIN number. Type this PIN number into the open dialogue box within the App. The PIN in your KILO and the PIN entered on your smartphone must match. Press OK to complete the pairing operation. You will now see your KILO ID in blue listed below the KILO icon. You can now exit this screen.
Touch the ID in white. (continued on next page) 3a. Updating your KILO to the latest software during Pairing You may be prompted to update the software on your KILO. These software updates are mandatory and allow Sig Sauer to ensure that your BDX App and KILO perform optimally. Most updates take less than 1 minute. Ensure that your KILO is turned on and that your smartphone has at least 25% battery life remaining before installing any software updates.
sigsauer.com App and let the KILO time out; restart the process over. 4. Configure up to 25 custom bullet profiles The BDX App allows you to create and modify up to 25 profiles. From the home screen of the App touch PROFILES. Only one profile can be active at any time and is denoted by the BDX Icon in blue to the right of the screen. The BDX App comes with one default 0.308 profile.
page you can rename the profile by touching on the “Custom Gun 1” and typing in a new name. After selecting a bullet manufacturer, select the actual bullet you intend to use. Once selected you will return to the Gun Profile page where you will need to click on the sync icon to the right to activate this profile. In this example the new profile is called “.223 Sierra” – be sure to activate this profile.
sigsauer.com RANGEFINDER HEADS-UP DISPLAY (HUD) From the home screen of your BDX App select RANGEFINDERS to display the HUD. The HUD displays all range, environmental and ballistic information and allows you to configure your KILO.
KILO SETTINGS From the Settings menu you can fully configure the following: 1. Rangefinder Mode (AMR, LOS or ABU) 2. Target Mode (BEST or LAST) 3. Display Brightness (AUTO or 1 – 9 manual) 4. Range Units (Yards or Meters) 5. Sleep Time (30, 60, 120 or 180 seconds) 6. Sight Units (MOA or MIL) You can toggle all fields by simply touching the letters in white. Your KILO must be turned on and paired. To save your settings touch the BDX icon in the upper left corner of the display. This will save your settings.
sigsauer.com TEMPERATURE AND ALTITUDE Once your KILO is paired and actively synced with your smartphone, when you enter the RANGEFINDER HUD screen your smartphone will automatically pull the local temperature and altitude from the closest weather station. If you are not in cell range you can manually update both temperature and altitude by touching on the white numbers in each field and manually updating these environmental conditions.
MUZZLE VELOCITY (MV) CALIBRATION The most important input for calculating accurate Applied Ballistics solutions is getting your MV correct. You need to either chronograph your firearm or use the embedded MV Calibration routine built into the BDX App. To use the MV Calibration routine make sure your scope is zeroed (i.e.
sigsauer.com MUZZLE VELOCITY (MV) CALIBRATION (continued) After performing a 3 shot group, note if your point of impact was high or low relative to your point of aim. If your group was high, select High. If low, select Low. If POA = POI, then cancel the muzzle calibration. If your group was high or low, then select the unit of offset in MILS, MOA, Inches or Centimeters and finally input the amount of offset or miss.
MUZZLE VELOCITY (MV) CALIBRATION (continued) After entering the amount of offset the app will calculate a new MV. Confirm the calculated (calibrated) MV and the new MV value will be saved in your bullet profile. In this example the miss was high by 4 inches which computed to an MV of 2799 fps.
sigsauer.com CONFIGURING GLOBAL SETTINGS IN THE BDX APP From the Home Screen of the BDX App you can configure Global Settings. Any field that is in white can be changed by touching on the unit of measure and toggling between values. The help menu is available to assist you. Global Settings include: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
FREQUENTLY ASKED QUESTIONS (FAQ): Q: I can’t get the display to focus. A: You need to adjust the diopter ring to your vision. Rotate the eyecup / diopter ring in either direction until the display comes into sharp focus. Q: I can’t seem to range very far past trees or animals. A: Your KILO will perform differently based on changes in ambient conditions such as bright sunlight or snow, rain or fog, temperature and the reflectivity of the target being ranged.
sigsauer.com Q: I can’t locate the BDX App on the Apple or Android Stores. A: Search for Sig Sauer or BDX at the store. Q: My battery drains too fast. A: Most rangefinders will provide over 4000 individual range calculations using a fresh CR2 primary lithium battery. Your KILO exceeds this specification. When heavily using SCAN mode the battery may appear to drain faster since your KILO is ranging 4x per second in HyperScan mode.
KILO1600BDX™ 6x22 mm SPECIFICATIONS Magnification 6x Objective Clear Aperture 22 mm Exit Pupil 3.7 mm Eye Relief 17 mm Angular (FOV) 6° FOV @ 100yds 34.18 ft Laser Divergence Range Response Time Scanning Range Resolution Under 100 yds Max Range Weight with Battery 42 4.00 x 0.2 MRAD .25 sec Yes .
sigsauer.
A A – 3 in / 76 mm B – 4.3 in / 109 mm C – 1.
sigsauer.com W DANGER CLASS 3R LASER PRODUCT INVISIBLE LASER RADIATION - AVOID DIRECT EYE EXPOSURE Complies with FDA performance standards for laser products except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice 56, dated May 8, 2019. P o < 23W, λ = 905 nm, t = 22 ns This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
• • • • Reorient or relocate the receiving antenna Increase the separation between this product and the receiver Connect the equipment to an alternative outlet or receiver Consult a technician. Shielded interference cable must be used with the equipment in order to comply with the limits for adigital device pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.
sigsauer.com FCC STATEMENT: of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
receiver. • Connect the equipment into an outlet on a circuit different Ce dispositif contient un (S) émetteur (S)/ récepteur (S) exempté from that to which the receiver is connected. (S) de licence L’innovation, la Science et l’économie RSS(S) • Consult the dealer or an experienced radio/TV technician exempté (S) de licence de développement Canada.L’exploitation for help.
sigsauer.com FI IN N I G S A U E R TE E S N IT A E GUAR SIG SAUER Electro-Optics Infinite Guarantee™ SIG SAUER has manufactured the most rugged, dependable high-performance firearms for over two centuries. Our heritage of design, engineering and precisionmanufactured quality predates the existence of any other optics company worldwide. We understand the importance of quality in the line of fire, at the shooting range or on your next hunt.
TR ONI C & TR I TI EC If you ever have a problem, no matter the cause, we promise to take care of you when it counts. Please note that our Infinite Guarantee does not provide coverage for intentional damage, misuse, cosmetic damage that does not affect the performance of the optic, loss, theft or unauthorized repair or modification. Excludes electronic components.
FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL 603-610-3000 27100 SW Parkway Avenue, Wilsonville, Oregon 97070 USA P/N 7401769-01 R02 sigsauer.