Installation Instructions

Z504610004
INTELLI PUSHER AND RECEIVER OPERATIONS
SPEAKER
LED
INDICATOR
ADJUSTMENT
SCREW FOR
PADDLE TRAVEL
INTELLI PUSHER THE PUSHER HAS A
ADJUSTMENT SCREW FOR ADJUSTING
DISTANCE TO SENSE TRAVEL. THE PUSHER IS
PRESET TO APPROXIMATELY 3/4" to 3”.
PADDLE OPERATION
THE PUSHER WILL ACTIVATE AN LED FLASH
AND SILENT RF SIGNAL TO THE ECHO BOX
ONCE, EVERY TIME THE PADDLE IS SLID
FORWARD BY THE SET DISTANCE. IF THE
LED/RF SIGNAL IS TRIGGERED 4 TIMES WITHIN
A 10 SECOND PERIOD, THE PADDLE WILL
SEND A SILENT ALARM (RF SIGNAL) TO THE
ECHO BOX, AND FLASH THE LED FOR 5
SECONDS ON THE PUSHER. NOTE THE
DISTANCE THAT THE PUSHER TRAVELS, PER
INDIVIDUAL LED FLASH, CAN BE CHANGED
WITH THE ADJUSTMENT SCREW LOCATED ON
THE TOP OF THE PADDLE. THE PADDLE IS
INOPERATIVE WHEN PUSHED BACKWARDS
FOR STOCKING, TO PREVENT FALSE ALARMS.
OPERATION MODES FOR THE ECHO BOXES
THE RECEIVER’S AUDIO IN “A” MODE WILL
PROVIDE AN AUDIBLE BEEP WHEN RECEIVING
A SIGNAL FROM THE PUSHER; INCLUDING A 5
SECOND ALARM SEQUENCE WHEN THE
PUSHER ACTIVATES 4 TIMES WITHIN 10
SECONDS. THE OUTPUT TERMINALS WILL
ALSO ACTIVATE WHEN IN THE ALARM
SEQUENCE. THE RESET BUTTON WILL TURN
THE ALARM OFF ON THE RECEIVER-ONLY,
AND DOES NOT DEACTIVATE THE PUSHER.
“B” MODE: THE RECEIVER AUDIO WILL
RESPOND TO THE PUSHER THE SAME AS
WHEN IN THE “A” MODE, EXCLUDING ANY
OUTPUT THROUGH THE AUXILIARY
TERMINALS, DURING THE ALARMING PHASE.
RECEIVER WILL ALARM AND BEEP AND SEND
SIGNALS TO THE AUXILLARY TERMINALS.
Optional
Antenna
Receiver
ZERO POSITION
PORT
12
12. USB
Auxiliary Terminals
System Connections