User Manual for AyAlarm V2.1 AyTerminal User Manual for AyAlarm V2.
User Manual for AyAlarm V2.1 AyTerminal Program and System Engineering The reproduction, transmission, translation or exploitation of this document or its content is not permitted without express written authority. Offenders will be liable for damages. All rights reserved, including rights created by patent grant or registration of a utility model or design. Right of technical modification reserved. Contents 1 Introduction..................................................................................
User Manual for AyAlarm V2.1 AyTerminal 5.2 Modes description............................................................................................................. 5.2.1 Alarm clock................................................................................................................... 5.2.2 Baggage Secure........................................................................................................... 5.2.3 Room Monitor............................................................
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 1Introduction 1.1Purpose of the document The purpose of this document is to describe and specify in detail the GUI for the product AyAlarm, an AyTerminal application. It is based on the version 1.0 of the AyAlarm application. 1.2Validity of the document This document is valid for the AyTerminal project, a subproject of AySystem. The document describes how to use the AyAlarm application. 1.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 2Quick instruction / reference 2.1Device description The detailed device description you find in chapter 3.1. The major parts are: • Display (OLED display): Used for information screens and for input screens. There are 2 display modes: standard mode and jumbo mode (big-sized characters) See chapter 3.1.9.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application • Baggage Secure: Activation Time (see chapter 5.4.1) Autostart (see chapter 5.4.2) Notifiers (see chapter 5.4.3) Triggers (see chapter 5.4.4) Duration (see chapter 5.4.5) • Room Monitor: Activation Time (see chapter 5.4.1) Autostart (see chapter 5.4.2) Notifiers (see chapter 5.4.3) Triggers (see chapter 5.4.4) Duration (see chapter 5.4.5) • Car Alarm: Activation Time (see chapter 5.4.1) Autostart (see chapter 5.4.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 3 AyTerminal device 3.1Device description AyTerminal is a device that enables phone calls, temperature, noise and acceleration measuring, sounding alarms or notifying user via web pages, voice call and/or SMS. All this numbered features are AyApplication specific.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Hold-switch Figure 3-4 Hold-switch 3.1.1Hold-switch This switch prevents unintended button presses, see Figure 3-4. A button press is accepted only in case the switch is in position “unlock”. If the hold-switch is in position “lock“ the only accepted action is the long-press onto the central button, if this is enabled by AyApplication e.g. to enable emergency calls.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application deactivation after 15min Table 3-2 Status LED colors depending on AyTerminal status In case of two or more simultaneous events that can trigger the change of Status LED color there have been established priority rules. These rules are: 1. If the Status LED color is blinking ORANGE or RED then the Status LED color can not be changed to GREEN (permanent/ blinking slow/ blinking fast).
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Up button Left touch button (Back) Entry touch button (OK) () Figure 3-5 Current AyTerminal design. Down touch button Display and central button 3.1.5.1Navigation through the menu structure In a menu layout the first menu item is selected by default. Another item can be selected by pressing up/ down button.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 3.1.6.2Ring tones There are 7 available ring tones which can be used in AyApplications. With AyCare application these ring tones can just be played from Settings/ Audio/ Ring tones. 3.1.6.3Alarm tone Alarm tone is an internal alarm which is used in AyCare for playing siren in case of alarm (if the mode is defined so). 3.1.7Microphone The microphone is used for the GSM voice call and/or as noise sensor. 3.1.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Charging finished Charging finished Charging Interrupted Charging interrupted Figure 3-6 Charging possible states of AyTerminal 3.1.11.2Connecting a charger & AyTerminal switched on If the device is switched on and a charger is connected, the charging battery symbol will be shown while the status bar is shown. The AyTerminal will work normally like it does without charger connected.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 4.2Startup Press the central button of the device for 2 seconds in order to turn on AyTerminal. A correct startup is indicated by the LED blinking green and a simple animation is shown on the display Figure 4-8. Figure 4-8 AyTerminal simple animation 4.2.1Loading screen In few seconds after LED is ON the AyTerminal loading screen will be displayed, as presented in Figure 4-9. loading loading ... ...
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application from 0 to 9). The PIN is requested to have between 4 and 8 digits. Because of this constraint the OK option is shown and can be selected after the 4th digit was inserted. Enter PIN 9 0 1 2 ***_ Enter PIN ***_ 9 0 1 Figure 4-12 PIN input screen – standard and jumbo mode If the entered PIN is incorrect then a message like in Figure 4-13 is displayed for 3s. Incorrect PIN. Try again! 2 tries left. Incorrect PIN . Try again! tries left.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Welcome to Ay Welcome to Ay Figure 4-16 AyTerminal boot screen – standard and jumbo mode If the AyTerminal is not registered to the AyServer then the default nickname is displayed. Default nickname is “John Doe”.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5AyAlarm application The AyAlarm AyApplication has six modes (see chapter 5.2 for more details). It can be defined how to be notified if an alarm is triggered: • By sending an SMS to a defined phone number • By establishing a voice call to a defined phone number • By informing the AyServer via GPRS • By playing an alarm sound using the AyTerminal loudspeaker. Not all the notification types are available for each mode.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.2Modes description All modes provide a similar menu structure. 5.2.1Alarm clock This mode provides an alarm clock. A timer can be set on a daily basis. An alarm is triggered when the defined time is reached. For configurable values and notifiers refer to chapter 5.4.3. 5.2.2Baggage Secure This mode can be used for the protection of the baggage.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.2.
User Manual for AyAlarm V2.1 mode Alarm Clock configurable value Duration Time Siren active SMS notifier active SMS phone number SMS text AyTerminal AyAlarm application format & restrictions * duration of alarm/alarm Time format is state ( in case of alarm hh:mm:ss. triggered) Max. 30 minutes * time period for activating Min. 15s. again the mode if no If 0 then duration is deactivation code after an ignored and alarm alarm was triggered state is forever time that triggers the alarm Time format is 24h.
User Manual for AyAlarm V2.
User Manual for AyAlarm V2.1 mode Room Monitor configurable value Duration Siren active * ignored in case of ListenIn SMS notifier active AyTerminal AyAlarm application description * duration of alarm/alarm state ( in case of alarm triggered) * time period for activating again the mode if no deactivation code after an alarm was triggered flag if siren enabled flag if SMS notifier enabled format & restrictions Time format is hh:mm:ss. Max. 30 minutes Min. 15s.
User Manual for AyAlarm V2.
User Manual for AyAlarm V2.
User Manual for AyAlarm V2.1 mode Voice Call AyTerminal AyAlarm application configurable value SMS notifier active flag if SMS notifier enabled SMS phone number target phone number for SMS SMS text Text to be sent via SMS in case of alarm AyServer active flag if AyServer notifier enabled Phone number Phone number that will be dialled description format & restrictions Boolean false – disabled true – enabled Max. 15 characters. If not defined SMS is not send out Max.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.2.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application • Baggage Secure • Room Monitor • Car Alarm • Temperature Watchdog • Voice Call • Emergency Call • Settings • Turn Off By default the first menu item is selected. Everywhere in the AyApplication the menu is circular which means that after the last item comes the first item and in front of the first item is the last item. If Back button is pressed in a menu the previous menu is displayed with the proper selected item.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application • Notifiers – to configure the alarm notifiers of this mode. For details see the chapter 5.4.3. • Triggers – to configure the alarm triggers of this mode. For details see the chapter 5.4.4.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application End time 13:00:00 OK End time 13:00: 0 1 2 Figure 5-23 Activation time – Set end time screen The activation time is applied to the mode as long as the “Active” check box is checked. To disable the activation time uncheck the “Active” check box in the “Activation time” menu (see Figure 5-21 Activation time menu). Note! Only one mode can have the activation time active. The other modes will have activation time option disabled automatically.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Examples: 1. Start and end time for “Room Monitor” mode: 11:00 and 15:00. The “Active” item in the menu is checked, which activates the defined activation time. The “Car Alarm” mode was configured with inactive activation time, which makes the mode immediately active when starting it. At 9:00 the “Car Alarm” mode is started and its status is active. At 11:00 the “Room Monitor” mode becomes active and the “Car Alarm” mode is stopped.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application on the display is updated. The mode becomes again idle when the end time is reached (15:00 o’clock). If no change is made, the same scenario will be repeated the next day. In Figure 5-26 Activation time example 3 the mode is deactivated at 17:00.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.4.3.2SMS The SMS data are: the phone number and the message text. The message text can not be defined/ modified on AyTerminal. For each mode there is a default value for SMS text defined (see Table 5-5 AyAlarm mode specific settings) and it can be changed only using the web GUI. This notifier can be activated or deactivated. The phone number to send the SMS can be changed. Moving through the menu items is possible by using the up/ down buttons.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application will be displayed in the menu. If the phone number is not defined then in the menu will appear “”. Pressing the left button of the device leads to the previous screen. In “Voice Call” menu the status icons are not displayed. Instead a suggestive title is displayed. Voice call Active
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Notifiers Siren SMS Voice Call £ AyServer Notifiers Siren SMS Voice Call Figure 5-32 AyServer not available case 5.4.4Triggers Each mode has its own list of alarm triggers and each one of them is configurable independently. At least one trigger has to be activated. If one mode has only one trigger than this one will be activated by default. Note: At least one trigger per mode has to be activated, if the mode is specified with triggers.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Triggers Temperature Activation delay Triggers Temperat Activation Figure 5-36 Setup triggers menu for Temperature watchdog mode In case of the Voice Call mode the user has the possibility to define a phone number where to call instead of the “Triggers” option (see Figure 5-37). The phone number is the actual set phone number (e.g. +407777773333). If the phone number is not defined then the “” line will be displayed in the menu.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application curr.:+24°C ≥ +35 °C 072 curr.: 10 Figure 5-38 Sensor setup screens 5.4.4.1Listen-In The following menu is provided for setting the Listen-In parameter values: Listen-in Active +40777777333 Listen-in Active +40777... Figure 5-39 Setup Listen-In trigger The phone number is the currently set phone number (e.g. +407777773333). If the phone number is not defined then the “” line will be displayed in the menu.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Timer 12:00: 0 1 2 3 Timer 12:00: 0 1 2 Figure 5-41 Set alarm clock screen The colons are displayed after the second and fifth digits are inserted. OK option is displayed only after inserting the time in complete format (hh:mm:ss). To leave this screen and set the value the user must first select OK option and then press the enter button. 5.4.4.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Noise Active Threshold Noise Active Threshold Figure 5-44 Setup ego-motion menu screen The available buttons and screen’s functionality are the same as in every menu screen. Using a sensor adjustment screen the noise threshold can be set (see Figure 5-45 Noise adjustment screen). Reaching or exceeding this level triggers the defined alarms. For sensing the noise the AyTerminal microphone will be used as for GSM voice call.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Temperature Current: +24 °C > +35 °C Temperatur curr.:+24°C > +35 °C Figure 5-47 Temperature adjustment screen The first threshold value of the sensor is the default value (the default value can not be modified using the AyApplication). To increase/ decrease the threshold value use the up/ down buttons. To leave this screen and to save the value press the Enter button (OK button).
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Alarm clock Current 19:54 Timer 20:54 Notifiers: Duration: 01:00 Alarm clo ck Current 19:54 19:54 Timer 20:54 Notifiers: Figure 5-49 Overview screen for Alarm Clock mode The overview screen contains the following data: • List of active triggers. For each trigger the threshold value and the operator (>, <) will be displayed. • Activation delay in seconds • List of active notifiers.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.5Activating/Starting a mode A configured mode can be started by choosing “Start” in the mode menu. If the Activation time is checked the mode is first going in idle status and is activated at the specified time. Else the mode is activated immediately when “Start” option is chosen.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Be aware that no notifier is activated. Be aware that no notifier is Figure 5-52 No notifier activated message box After starting a mode or starting the AyTerminal with the PIN of the SIM card disabled and the mode set to auto start, a screen like in Figure 5-53 is shown in following cases: • if the mode was started without activating the activation time option. In this case the mode is started and also activated.
User Manual for AyAlarm V2.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Emergency call Settings Turn OFF Emergenc Settings Turn OFF Figure 5-57 Main menu – standard and jumbo mode 5.8Settings The “Settings” menu provides the possibility to configure general AyTerminal settings via its submenus and menu items. Settings AyServer Sync AySnapOn AyTerminal Audio Settings Clock Display Security AyServer Sync Figure 5-58 Settings menu 5.8.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.8.2AySnapOn The “AySnapOn” menu provides the ability to: • search for new AySnapOns that are connected to the AyTerminal • view all found AySnapOns In the list of found AySnapOns it is possible to: • activate or deactivate each AySnapOn AySnapOn Search AyGPS AyCAMERA AySnapOn View AyGPS Figure 5-62 AySnapOn menu – standard and jumbo mode If more than four AySnapOn are found during the search process a message is shown on the display.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application AyTerminal
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Selected language Display – jumbo mode EN deactivated Table 5-7 AyTerminal settings – default values For AyAlarm mode related settings see Table 5-5 AyAlarm mode specific settings and Table 54 AyAlarm – settings available for all modes. 5.8.3.2 Firmware Update In the “Firmware” menu the version of the current firmware is displayed. If registered to the AyServer the firmware update can be initiated.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application • APN • DNS • NET username • NET password • AyServer URL This information can not be changed via AyTerminal. Bootloader: 1r15 MainFW: 1r28 MSISDN: +1234567890 APN: MSISDN: +12345678 90 APN: Figure 5-71 Info message – standard and jumbo mode If the information is not fitting in one screen (one screen has 20 lines in standard and also jumbo mode) then the text is split in more message boxes.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application 5.8.5Clock This menu gives the possibility to: • see current time and date • set the time and date manually • activate/deactivate automatic time synchronization with the AyServer On the AyTerminal the user has to set the time manually or if registered to the AyServer the time can be automatically synchronized on connection to AyServer.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Using Jumbo mode menu item the user has the possibility to activate or deactivate the jumbo mode of the display 5.8.7Security The Security menu contains following items: • Deactivation code • PIN control (preceded by a checkbox) • Change PIN 5.8.7.1Setting the deactivation code After the “Deactivation code” setup has been chosen an editor is displayed to enter the new deactivation code.
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Old PIN ***_ New PIN OK 0 1 ***_ OK 0 1 Re-enter PIN OK ***_ 0 1 Figure 5-81 Change PIN screens – jumbo mode If user enters wrong pin, user will receive message about wrong pin (Figure 5-82 Incorrect PIN message). After entering wrong PIN three times user will receive message shown in Figure 5-81. Incorrect PIN. Try again. Incorrect PIN. Try again. Figure 5-82 Incorrect PIN message No tries left. Option blocked. No tries left .
User Manual for AyAlarm V2.1 AyTerminal AyAlarm application Saving Ay settings. Saving Ay settings. Figure 5-85 Saving AyTerminal settings After saving the settings, Ay is sending SHUTDOWN notification to AyServer, but only if Ay is registered to AyServer. A message is shown on display informing about Ay intention (see Figure 586 Sending SHUTDOWN notification to AyServer). Sending SHUTDOWN notification to AyServer. Please wait.