User Manual for AyCare V2.1 AyTerminal Issue February 2007 .
© Siemens AG Österreich 2007 Program and System Engineering The reproduction, transmission, translation or exploitation of this document or its content is not permitted without express written authority. Offenders will be liable for damages. All rights reserved, including rights created by patent grant or registration of a utility model or design. Right of technical modification reserved.
User Manual for AyCare V2.0 AyTerminal Contents Contents 1 Introduction................................................................................................................................. 6 1.1 Purpose of the document.................................................................................................... 6 1.2 Validity of the document..................................................................................................... 6 1.3 Definitions of abbreviations.............
AyTerminal Contents User Manual for AyCare V2.1 4.2.3 Baby Phone................................................................................................................... 19 4.2.4 AyCare mode specific settings.................................................................................... 19 4.2.5 AyCare alarms and notifiers....................................................................................... 24 4.3 Selecting a mode............................................................
User Manual for AyCare V2.0 AyTerminal Contents 5.4 Activating a mode.............................................................................................................. 49 5.5 Deactivating a mode or a triggered alarm........................................................................ 49 5.5.1 Turning off the AyTerminal..........................................................................................
AyTerminal Contents User Manual for AyCare V2.1 1Introduction 1.1Purpose of the document The purpose of this document is to describe and specify in detail the GUI for the product AyCare, an AyTerminal AyApplication. It is based on the 1.0 version of the AyCare AyApplication. 1.2Validity of the document This document is valid for the AyTerminal project, a subproject of AySystem. The document describes how to use AyCare AyApplication. 1.
User Manual for AyCare V2.1 AyTerminal AyCare application 2AyTerminal Device 2.1Device description AyTerminal is device that enables phone calls; temperature, noise and acceleration measuring;, sounding alarms; or notifying the user via web pages, siren, voice call and SMS. All this numbered features are AyApplication specific.
AyTerminal Contents User Manual for AyCare V2.1 Release button Figure 2-3 Release button Hold-switch Figure 2-4 Hold-switch 2.1.1Hold-switch This switch prevents unintended button presses, see Figure 2-4. A button press is accepted only in case the switch is in position “unlock”. If the hold-switch is in position “lock“ the only accepted action is the long-press onto the central button, if this is enabled by AyApplication e.g. to enable emergency calls.
User Manual for AyCare V2.
AyTerminal Contents User Manual for AyCare V2.1 • connect a Siemens standard headset and use it for GSM voice calls. • connect the AyTerminal charger for charging the AyTerminal battery. 2.1.4AySnapOn connector This connector is used to connect up to four AySnapOns. 2.1.5Navigation buttons The navigation buttons provide the input possibility for the AyTerminal user.
User Manual for AyCare V2.1 AyTerminal AyCare application • Accept the selection • Check/uncheck the item (if a radio button or a check box is displayed in front of the item) To go back to the previous menu level the left button has to be pressed. 2.1.6Speaker The speaker of the AyTerminal is used for GSM voice calls and for providing an acoustic feedback.
AyTerminal Contents User Manual for AyCare V2.1 the temperature sensor will have lower environment temperature accuracy due to the battery charging. 2.1.10OLED display The AyTerminal has a white OLED display with 128x96 pixel resolution which is also the active display area used for the screen layouts. In standard mode the used font is Tahoma 15x16 proportional and in jumbo mode the font Tahoma 23x24, each font consisting of maximum 128 characters. These fonts allow English and German user interfaces.
User Manual for AyCare V2.1 AyTerminal AyCare application Voice Call Panic Button Baby Phone Emergency Call Voice call Panic Butto Baby Phon Figure 2-7 AyTerminal ON charging mode 2.1.11.3Charger connected, AyTerminal running, shutting down If the changer is connected while AyTerminal is switched on and user selects Turn Off in main menu, shutting down procedure is started – see the chapter 4.9, and the AyTerminal pass in charging state. A screen like in Figure 2-6 is shown.
AyTerminal Contents User Manual for AyCare V2.1 3Installation and startup 3.1Installation Remove the battery cover by pressing the Release button (see Figure 2-3). Slide the SIM card into its holder. Make sure that the gold contacts of the SIM are facing down and the cut off corner is correctly aligned. Insert the battery side way into the AyTerminal and then press it downwards until it clicks into position. Place the battery cover back. 3.
User Manual for AyCare V2.1 AyTerminal AyCare application Emergenc Turn off Emergency call Turn off Figure 3-11 Emergency call menu – standard and jumbo mode 3.2.3PIN/PUK input If the SIM card was inserted correctly and the SIM PIN control is enabled the following screen will be shown. The selected digit can be changed by using the up/down navigation buttons (digit range is from 0 to 9). The PIN is requested to have between 4 and 8 digits.
AyTerminal Contents User Manual for AyCare V2.1 Figure 3-15 PUK input screen and message shown after correct PUK – jumbo mode If the PIN/PUK entry is canceled by pressing the Back button when the input line is empty, the AyTerminal emergency call menu will be displayed (see 3.2.2). 3.2.4Boot screen After the PIN/PUK is entered correctly, the AyTerminal boot screen will be displayed, as presented in Figure 3-16. Welcome to Ay Welcome to Ay
User Manual for AyCare V2.1 AyTerminal AyCare application 4AyCare application The AyCare application has three modes (see chapter 4.2 for more details). Each mode has its own menu and functionality. Different notifiers can be chosen for each mode: • Sending an SMS to a defined number • Establishing a voice call to a defined number • Informing the AyServer via GPRS • Playing a siren using the AyTerminal loudspeaker. Not all the notification types are available for each mode.
AyTerminal Contents User Manual for AyCare V2.1 4.1AyCare menu structure Voice Call Panic button Baby phone Start o Active Activation Time Start o Autostart End Notifiers o Active SMS Phone numbers o AyServer Overview Legend Emergency call Settings Turn OFF
User Manual for AyCare V2.1 AyTerminal AyCare application 4.2Modes description All modes provide a similar menu structure. Navigation through menu structure is described in chapter 2.1.5.1. 4.2.1Voice Call This mode is used to establish a voice call to one defined phone number by pressing the central button for minimum 2 seconds. In case there is only one phone number specified the VoiceCall will be established automatically. If user specified more then one number, menu with saved numbers will appear.
AyTerminal Contents User Manual for AyCare V2.1 time deactivates the mode 24h.
User Manual for AyCare V2.1 Voice Call SMS notifier active AyTerminal AyCare application flag if SMS notifier enabled Boolean false false – disabled true – enabled SMS phone number target phone number for SMS Max. 15 characters. If not defined SMS is not send out none SMS text Text to be sent via SMS in case of alarm Max. 160 characters. “Voice Call Alarm” AyServer active flag if AyServer notifier enabled Boolean true false – disabled true – enabled Phone nr.
AyTerminal Contents Panic Button User Manual for AyCare V2.1 SMS notifier active flag if SMS notifier enabled Boolean false false – disabled true – enabled SMS phone number target phone number for SMS Max. 15 characters. If not defined SMS is not send out none SMS text Text to be sent via SMS in case of alarm Max. 160 characters.
User Manual for AyCare V2.1 Baby Phone Duration AyTerminal AyCare application * duration of alarm/alarm state ( in case of alarm triggered) * time period for activating again the mode if no deactivation code after an alarm was triggered Noise flag if noise sensor is enabled Time format is hh:mm:ss. 3 minutes Min. 15s. Max. 30 minutes 0 is a valid value and represents alarm forever.
AyTerminal Contents User Manual for AyCare V2.1 Figure 4-18 AyCare mode specific settings 4.2.
User Manual for AyCare V2.1 AyTerminal AyCare application 4.3Selecting a mode When turning on the AyTerminal and starting the AyCare AyApplication, and if no mode is set to auto start, the main menu (see Figure 4-20) will be displayed. If a mode is set to auto start, the defined mode will be started automatically.
AyTerminal Contents User Manual for AyCare V2.1 Baby Phone Start Activation time Autostart Notifiers Baby Phone Triggers Duration Overview Start Baby Phon Start Activation t Autostart Baby Phon Triggers Duration Overview Figure 4-21 “Baby Phone” menu in STANDARD and JUMBO modes For each mode the mode menu contains the following options: • Start – • Activation time – • Enables to configure the alarm triggers of the current mode.
User Manual for AyCare V2.1 AyTerminal AyCare application 4.4.1Activation Time The purpose of the “Activation time” menu (see Figure 4-22) is: • Enable/disable the activation time. In case of activating the activation time the mode will be active only for the defined time (e.g. 1 hour, between 12:00:00 and 13:00:00). When the end time is reached the mode becomes idle. • Defining an activation start time (see Figure 4-23) (e.g. 12:00:00) • Defining an activation end time (see Figure 4-24) (e.g.
AyTerminal Contents User Manual for AyCare V2.1 4.4.1.1Examples 1. Start and end time for “Panic Button” mode: 11:00 and 15:00. The “Active” item in the menu is checked (defined activation time is activated). “Baby Phone” mode is configured with inactive activation time; so the mode will become immediately active when starting it. At 9:00 “Baby Phone” mode starts and its status is set to active. At 11:00 “Tracking Mode” mode is becoming active and “Baby Phone” mode is stopped.
User Manual for AyCare V2.1 AyTerminal AyCare application 3. Current time on AyTerminal: 11:30. Start and end time for “Baby Phone” mode: 11:00 and 15:00. The “Active” item in the menu is checked (defined activation time activated). At 11:30 the “Baby Phone” mode is started manually. Because of activated activation the status of “Baby Phone” is idle. At 11:00 next day the mode becomes active and the status on display is updated. The mode becomes again idle when the end time is reached (15:00 o’clock).
AyTerminal Contents User Manual for AyCare V2.1 4.4.3.1SMS The SMS data are: the phone number and the message text. The message text can not be defined/ modified by the user on the AyTerminal. A default value for the SMS text of each mode is defined, and can be changed only using the web GUI. The new SMS text is received from the AyServer during synchronization. The default values for SMS text are defined in Figure 4-18 AyCare mode specific settings. This notifier can be activated or deactivated.
User Manual for AyCare V2.1 AyTerminal AyCare application If the highlighted item is “Active” then pressing the OK button (right button) checks or unchecks the item. If the highlighted item is “” then pressing the OK button (right button) gives the possibility to edit the phone number. Pressing the back button (left button) of the device leads to the previous screen (Notifiers menu). Voice call Active Voice Call Active +385000...
AyTerminal Contents User Manual for AyCare V2.1 Notifiers SMS Voice Call AyServer Notifiers SMS Voice Call AyServe Figure 4-33 AyServer available case 4.4.4Triggers / Phone number Each mode has its own list of alarm triggers and each one can be configured independently. At least one trigger has to be activated. If no trigger is activated then the mode can’t be started. Each trigger can be activated or deactivated or its defined parameter values can be changed.
User Manual for AyCare V2.1 AyTerminal AyCare application Panic Butt Start Activation Autostart Panic Butt Notifiers Overview Start Figure 4-35 Settings menu in Voice Call mode (standard and jumbo mode) AyCare is using only the noise sensor from the three AyTerminal sensors. For setting the noise threshold value the noise calibration screen is shown.
AyTerminal Contents User Manual for AyCare V2.1 One phone number is the currently set phone number (e.g. +407777773333). If the phone number is not defined then the “” line will be displayed in the menu. The available buttons and screen’s functionality are the same as in all menu screens. For Listen-in a phone number can be added/ modified through a phone editor screen (Figure 4-38).
User Manual for AyCare V2.1 AyTerminal AyCare application Noise 72 Noise 72 curr.: 10 curr.: 10 Figure 4-40 Noise adjustment screen Possible actions in this screen are: • Increasing or decreasing the threshold value by using the up/down buttons. • Saving the threshold value using the OK button (right button). • Going back to the previous screen without saving any changes using the Back button (left button). No validations are made when leaving this screen.
AyTerminal Contents User Manual for AyCare V2.1 Baby phone Triggers: NoiseActivation delay:30s Notifiers: SMS (+38531234998), AyServer Duration:180s Baby phone Triggers: Activation delay:30s Notifiers: Figure 4-42 Overview screen The overview screen contains the following data: • List of active triggers. For each trigger the threshold value is displayed. • List of active notifiers, separated by commas. If a phone number for SMS or Voice Call is defined the phone number is displayed in brackets.
User Manual for AyCare V2.1 AyTerminal AyCare application Baby Phone Active Baby Phone Active Figure 4-43 Active mode status screen for Baby Phone mode After starting a mode a screen like in Figure 4-44 is shown in following cases: • if the mode was started and the activation time’s active option was checked and the start time is not encountered. • if the activation time is active but the end time has been reached.
AyTerminal Contents User Manual for AyCare V2.1 Baby Phone Noise=28% Baby Phone Noise=28% Figure 4-45 Mode active and alarm triggered 4.6Deactivating a mode or triggered alarm For stopping the triggered alarm the mode has to be deactivated. Mode can be deactivated by pressing the deactivation code. After deactivating a started mode the mode menu will be displayed. . If mode is started using “autostart”, after entering deactivation code, main menu will be displayed.
User Manual for AyCare V2.1 AyTerminal AyCare application Sync Now successfully completed. Sync Now successfully completed. Figure 4-48 Sync Now – message in case of successfully completed synchronization Sync Now failed. Sync Now failed. Figure 4-49 Sync Now – message in case synchronization fails 4.8.
AyTerminal Contents User Manual for AyCare V2.1 4.8.3AyTerminal This menu provides the common settings for all AyApplications. Using the: • ”Info” option allows the user to see FW and AyTerminal useful information. See 4.8.3.3. • “Default settings” option allows user to reset all AyApplication configurable values to default. • “FW Update” option allows user to update the current FW (available only if user registered to AyServer). See 4.8.3.2.
User Manual for AyCare V2.1 AyTerminal AyCare application Default settings applied. Rebooting... Default settings applied. Rebooting...
AyTerminal Contents User Manual for AyCare V2.1 New FW available. Confirm update. Downloading ... FW 29 FW downloaded successfully from AyServer. Rebooting! Figure 4-56 Firmware update menu and messages – standard mode New FW avaible. Confirm FW Downloading downloaded ... successfully FW 29 from Figure 4-57 Firmware update menu and messages– jumbo mode In case of error following message box is shown and after enter/ back button is pressed the Firmware menu is displayed.
User Manual for AyCare V2.1 AyTerminal AyCare application Figure 4-59 Info message – standard and jumbo mode If the information is not fitting in one screen (one screen has 20 lines in standard and also jumbo mode) then the text is split in more message boxes. Going from one message box to another is possible by pressing the OK button. 4.8.4Audio In “Audio” menu AyTerminal audio settings can be changed. Checking/ unchecking the “Headset” checkbox item the connected headset is activated or deactivated.
AyTerminal Contents User Manual for AyCare V2.1 Time can be set manually on the AyTerminal, or – if registered to the AyServer – the time can be automatically synchronized. Time synchronization is performed daily and also every time if something changed on the AyTerminal that needs connection to the AyServer. If the “Time/Date” item is entered the “Autotime” item is deactivated automatically. The time input format is “hh:mm:ss” and the date input format is “DD.MM.YYYY” (European format).
User Manual for AyCare V2.1 AyTerminal AyCare application available ones: up, right, down, left, central. After entering the new deactivation code (pressing a code of 4 buttons) a message box is displayed informing about the new set deactivation code. The new code can be accepted or rejected using the right or left button. Code setup Code setup ** ** Figure 4-66 Code setup editor (standard and jumbo mode) The deactivation code is: up, right, Down, left.
AyTerminal Contents User Manual for AyCare V2.1 If user enters wrong pin, user will receive message about wrong pin (Figure 4-70: Incorrect PIN message). After entering wrong PIN three times user will receive message shown in Figure 4-71: Message after entering wrong PIN three times. Incorrect PIN. Try again. Incorrect PIN. Try again. Figure 4-70: Incorrect PIN message No tries left. Option blocked. No tries left . Option blocked. Figure 4-71: Message after entering wrong PIN three times 4.
User Manual for AyCare V2.1 AyTerminal AyCare application After saving the settings, Ay is sending SHUTDOWN notification to AyServer, but only if Ay is registered to AyServer. A message is shown on display informing about Ay intention (see Figure 474 Sending SHUTDOWN notification to AyServer). Sending SHUTDOW N notification Sending SHUTDOWN notification to AyServer. Please wait. Figure 4-74 Sending SHUTDOWN notification to AyServer 4.
AyTerminal Contents User Manual for AyCare V2.1 5Quick reference 5.1Device description The detailed device description you find in chapter 2.1. The major parts are: • Display (OLED display): Used for information screens and for input screens. There are 2 display modes: standard mode and jumbo mode (big-sized characters) See chapter 2.1.10.
User Manual for AyCare V2.1 AyTerminal AyCare application Autostart (see chapter 4.4.2) Notifiers (see chapter 4.4.3) Phone number (see chapter 4.4.4) • Babyphone: Activation Time (see chapter 4.4.1) Autostart (see chapter 4.4.2) Notifiers (see chapter 4.4.3) Triggers (see chapter 4.4.4) Duration (see chapter 4.4.5) • Emergency Call (see chapter 4.7) If this mode is activated, pressing the Enter button initiates an emergency call to the 112 emergency number.
AyTerminal Contents User Manual for AyCare V2.1 Index Acknowledgment tones............................... 11 Notifiers....................................................... 29 Activating a mode....................................... 36 Overview..................................................... 35 Activation delay........................................... 35 Panic Button............................................... 19 Activation Time........................................... 27 Phone number.