AI-LINK WF-M601-UWS3 WiFi Module Features: Supported WLAN Standards IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n Chip Solution MTK MT7601UN/B Size 33.0mm*40.0mm*6.0mm Model Overview: Module Name Installation Supported Standards Data Rate(max) Band Antenna Interface Note WF-M601-UWS3 Plugin IEEE 802.11b/g/n 150Mbps 2.4 GHz Integral 5V power supply Sichuan AI-Link Technology Co.,Ltd Add: Anzhou,Industrial park,Mianyang,Sichuan Web: http://www.changhong.
WF-M601-UWS3 WiFi Module Feedback of customer’s Confirmation We accept the specification after Confirmed Customer name Customer signature Confirmation Date Please feed back this paper and first paper after your signature by the address,thanks! ADD: Anzhou,Industrial park,Mianyang,Sichuan Factory: Sichuan AI-Link Technology Co.,Ltd. Approved Checked Designed Product WiFi Module Bai Lang Ding Shuang Peng Feng Jie Model WF-M601-UWS3 Date 2018-10-30 Sichuan AI-Link Technology Co., Ltd.
WF-M601-UWS3 WiFi Module Record of Modification No Date of modification Main content of modification V1.0 20181030 Initial Release Sichuan AI-Link Technology Co., Ltd.
WF-M601-UWS3 WiFi Module 1. Brief description: WIFI MODULE WF-M601-UWS3 is based on MTK MT7601UN/B complied with IEEE 802.11b/g/n standard from 2.4GHz-2.5GHz.Supported for 150Mbps high speed wireless network connection. 2. Block diagram:(N/A) 3. Package outline and Mounting:(units:mm) Top View Bottom View NOTE:General tolerance ±0.2mm unless otherwise stated Sichuan AI-Link Technology Co., Ltd.
WF-M601-UWS3 WiFi Module 4. Pin Definition: Pin Symbol 1 2 3 4 VCC-5V UDM UDP GND WLAN_DE V_WAKE RST 5 6 Description +5V DC Power Supply Input USB Data DM USB Data DP Connected to Ground Wake Up Reset the WLAN Pin Definition 5. Product Pictures TOP VIEW BOTTOM VIEW Silk Introduction: 1.The characters is the version of PCB in the red box; 2.The characters is PCB flame retardant in the green box; 3.The characters is the manufacture date of PCB in the yellow box; Sichuan AI-Link Technology Co.
WF-M601-UWS3 WiFi Module 6. Key Materials Item Category MPN Description MFR 1 IC MT7601UN/B 40-QFN MTK 2 PCB JUI7.820.0409-1 FR-4,2LAY 3 Crystal Oscillator E3SB40E00001BE 40M Note Sunlord IQPCB SHPCB JWT Hosonic ACX 7. General Requirements: No. Feature 7-1 Operation Voltage 7-2 Current Consumption 7-3 Operation Temperature 7-4 Antenna Type 7-5 USB 7-6 Storage Temperature Sichuan AI-Link Technology Co., Ltd. Description 3.3V+/-0.
WF-M601-UWS3 WiFi Module 8. RF Characteristics: 8-1 IEEE 802.11b Section: Items Contents Specification Mode Channel Data rate Min. TX Characteristics 1. Power Levels(Calibrated) 1) EIRP Power 2. Spectrum Mask @ target power 1) fc +/-11MHz to +/-22MHz 2) fc > +/-22MHz 3 Constellation Error(EVM)@ target power 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 4. Frequency Error RX Characteristics 5 Minimum Input Level Sensitivity(each chain) 1) 1Mbps (FER ≦8%) 2) 2Mbps (FER ≦8%) 3) 5.
WF-M601-UWS3 WiFi Module 8-2 IEEE 802.11g Section: Items Contents Specification Mode Channel Data rate Min. TX Characteristics 1. Power Levels 1) EIRP Power 2.
WF-M601-UWS3 WiFi Module 8-3 IEEE 802.11n HT20 Section: Items Specification Mode Channel Data rate (MCS index) TX Characteristics 2. Power Levels 1) EIRP Power 3. Spectrum Mask @target power 1) at fc +/-11MHz 2) at fc +/-20MHz 3) at fc > +/-30MHz 4. Constellation Error(EVM)@ target power 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 5. Frequency Error RX Characteristics 6.
WF-M601-UWS3 WiFi Module 8-4 IEEE 802.11n HT40 Section: Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) EIRP Power 2. Spectrum Mask @target power 1) at fc +/-22MHz 2) at fc +/-40MHz 3) at fc > +/-60MHz 3. Constellation Error(EVM)@target power 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5.
WF-M601-UWS3 WiFi Module 9. Software Requirements The driver supports the following operating systems: Linux, Microsoft Windows XP, Vista and Win7. Mfg. software tool version is MT7601 USB QA V1.0.9.0 or later. 10. Refelow Standard Condition 11.
WF-M601-UWS3 USB WiFi Module 4-4 Soldering ability test 4-5 Humidity test 3 1. After soldering, the soldered area must be covered by a smooth bright solder layer, some deficiencies such as a small amount of the pinhole, not wetting are allowed, but the deficiencies can not be in the same place; 2. At least 90% of soldered area shall be covered continuously by the soldering material.
WF-M601-UWS3 WiFi Module 12.Package (1)Tray Dimensions (2)the Direction of Product in Tray Notes: 1.Dimensions of the case:472mm*365mm*150mm; 2.30PCS Products per tray,and total 900PCS Products per case; Sichuan AI-Link Technology Co., Ltd.
WF-M601-UWS3 WiFi Module FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WF-M601-UWS3 WiFi Module Upgrade Firmware: The software provided for firmware upgrade will not be capable to affect any RF parameters as certified for the FCC for this module, in order to prevent compliance issues. End product labeling: This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2AOKI-WFM601UWS3”.
WF-M601-UWS3 WiFi Module CE Statement Herby,Sichuan AI-Link Technology Co., Ltd.declares that this WiFi Module,WF-M601UWS3 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product allowed to be used in all EU member states. Use the WiFi Module in the environment with the temperature between 0℃ and 60℃ Operation Frequency: 2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20)) 2422MHz~2462MHz (802.