秘密级别: 公开 生效时间:2021 年 12 月 24 日 保密期限: 长期 AL-7605B-WG-A 特性 Features: ➢ 接收制式 Supported WLAN Standard IEEE Std. 802.11a IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n ➢ 芯片方案 Chip Solution MTK MT7605BU ➢ 结构大小 Size 47.0mm x 30.0mm x 6.0mm 接口 安装方式 频段 Interface Assemble USB Screwing 天线 供电 Band Antenna Power supply 2.4G/5G One External Antenna One Internal Antenna 3.3V 四川爱联科技股份有限公司 Sichuan AI-Link Technology Co.,Ltd.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 客户确认反馈 Feedback of customer’s Confirmation 经确认,我方承认该规格书 We accept the specification after Confirmed 客户名称 客户签字 确认日期 Customer name Customer signature Confirmation Date 请签字后将此页与首页按以下地址回传我公司,谢谢! Please feed back this paper and first paper after your signature by the address,thanks! 地址:四川省绵阳市安州工业园区 ADD:Anzhou,Industrial park,Mianyang,Sichuan 公司:四川爱联科技股份有限公司 Factory:Sichuan AI-Link Technology Co.,Ltd.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 更改记录 Record of Modification 版本 Version 更改日期 Date V0.1 2021/12/24 主要更改内容 Main content of modification 首次发布 First release 四川爱联科技股份有限公司 Sichuan AI-Link Technology Co.,Ltd.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 1. Introduction AL-7605B-WG-A module design is based on MT7605 solution, The MT7605 is a highly integrated single chip which has built in a 2x2 dual-band wireless LAN radio. The Module is a highly integrated MAC/BBP and 2.4/5GHz PA/LNA single chip which supports a 300Mbps PHY rate.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 1.3 System Functions Table1: General Specification as below: Main Chipset Operating Frequency WiFi Standard Modulation MT7605BU 2.4G/5G 802.11a/b/g/n (2x2) WIFI:11b: DBPSK, DQPSK, CCK for DSSS 11a/g: BPSK, QPSK, 16QAM, 64QAM for OFDM 11n: BPSK, QPSK, 16QAM, 64QAM for OFDM Data rates 11b: 1, 2, 5.5 and 11Mbps 11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 11n: MCS0~15, up to 300Mbps 10pins USB 2.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 2. Mechanical Specification 2.1 Mechanical Outline Drawing Typical Dimension (W x L ):30.0mmx 47.0mm x 6.0mm General tolerance: ±0.3mm 2.2 Pin define Pin 1 2 3 4 5 6 7 8 9 10 四川爱联科技股份有限公司 Sichuan AI-Link Technology Co.,Ltd.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 2.3 Product Picture TOP VIEW 四川爱联科技股份有限公司 Sichuan AI-Link Technology Co.,Ltd.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 3. Electrical Specification This Specification is based-on conductive DVT testing result. The extreme condition include overall temperature (0℃,+25℃,+40℃) and overall voltage (3.0V,3.3V,3.6V). 3.1 IEEE 802.11b Section: Items Contents Specification Mode Channel Data rate TX Characteristics 1. Power Levels(Calibrated) 1) 21.5dBm Target (For Each antenna port) @11Mbps 2. Spectrum Mask @ Target Power 1) fc +/-11MHz to +/-22MHz 2) fc > +/-22MHz 3.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 3. 2 IEEE 802.11g/a Section: Items Specification Mode Channel Data rate TX Characteristics 1. Power Levels 1) 18.5dBm Target (For Each antenna port) @ 11g 54Mbps 2) 17.0dBm Target (For Each antenna port) @ 11a 54Mbps 2. Spectrum Mask @ Target Power 1) at fc +/-11MHz 2) at fc +/-20MHz 3) at fc > +/-30MHz 3. Constellation Error(EVM) @ Target Power 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4. Frequency Error 1) IEEE802.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 3.3 IEEE 802.11n HT20 Section: Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels 1) 18.0dBm Target (For Each antenna port) @ 2.4G MCS7 2) 16.0dBm Target (For Each antenna port) @ 5G MCS7 2. Spectrum Mask @ Target Power 1) at fc +/-11MHz 2) at fc +/-20MHz 3) at fc > +/-30MHz 3. Constellation Error(EVM) @ Target Power 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error 1) IEEE802.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 3.4 IEEE 802.11n HT40 Section: Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) 17.5dBm Target (For Each antenna port) @ 2.4G MCS7 2) 16.0dBm Target (For Each antenna port) @ 5G MCS7 2. Spectrum Mask @ Target Power 1) at fc +/-21MHz 2) at fc +/-40MHz 3) at fc > +/-60MHz 3. Constellation Error(EVM) @ Target Power 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 5. Antenna specification NO. Type Antenna Project Code External 1 PIFA PIFA 3.46 dBi(@2.4 ~ 2.5 GHz) 3.37 dBi(@5.15 ~ 5.85 GHz) RFMTA3009**IMLB401 PIFA Antenna 1.72 dBi(@2.4 ~ 2.5 GHz) 2.57 dBi(@5.15 ~ 5.85 GHz) SLK-T3010-L-**-B PIFA Antenna 3.79 dBi(@2.4 ~ 2.5 GHz) 3.68 dBi(@5.15 ~ 5.85 GHz) Antenna 3 Onboard PIFA Antenna Part No. PIFA Antenna Antenna External 2 Gain RFMTA170900NNLB00 3 6.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 8.Key component List 序 号 关键件名称 1 集成电路 2 PCB 3 晶体振荡器 4 DPX 型号 规格/材料 SMD3225-40M 备注 MTK MT7605BU JUI7.820.0101 Series 生产者 FR-4,4LAY 40M 2.4G@5G 科 翔 顺 络 英 创 立 连 坤 Hosonic 加 高 泰 晶 佳 利 华 科 顺 络 9.Order 订单料号 AL-7605B-WG-A WF-M605B-UWD1 WF-M605B-UWD2 规格 2.4G,5G;802.11n;ffc connector; 2.4G,5G;802.11n;ffc connectpr; 2.4G,5G;802.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 11. Packaging Information: 局部放大图 盖 板 盘( 空 托 盘) 装产品总共 16 盘 合 格 证( 装 箱 清 单) 粘 贴在纸箱 宽度方向 的左上角 (包装盒封胶形式如上图) (”工”字型封胶) 1、产品放置方向、标签粘贴位置、包装按示意图进行; 2、包装盒内放入2包2g干燥剂和一张湿度卡; 3、产品数量每层25只,上层放一个空托盘,每箱装4盒共计1600pcs,每盒400pcs产品; 4、外箱尺寸:499mm*394mm*298mm; 5、其它未尽事宜按照客户包装要求执行。 四川爱联科技股份有限公司 Sichuan AI-Link Technology Co.,Ltd.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 12. FCC Statement FCC regulatory compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
AL-7605B-WG-A IEEE 802.11a/b/g/n 2T2R USB WIFI Module 13.ISED Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.