SHU ® LEGENDARY PERFORMANCE™ SBC200 Battery Charger Chargeur d'accus SBC200 Batterieladegerat SBC200 Cargador de baterias SBC200 Caricabatteria SBC200 Carregador de Bateria SBC200 Batterijlader SBC200 3apR.QHOe ycTpOHCTBO SBC200 SBC200:1tCH SBC200 ttHEi2.I ~~71 SBC200 Et!5if!:1fEt!H SBC200 :,CgH Pengisi Daya SBC200 Printed in China ©2018 Shure Incorporated 27A37566 (Rev.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer's instructions.
Battery Charger SBC200 Charger Note: The SBC200 two-bay charger holds two SBC900 batteries, transmitters, or bodypacks. It may be used in any appropriate location with adequate space and ventilation. • This equipment is intended to be used in professional audio applications. Features • Charge up to two SB900 batteries, body packs or transmitters • EMC conformance is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance.
Power 1. Connect DC power cable to input jack on bottom of charger. Finger tighten lock nut for a secure connection. 2. Route the cable along the desired channel and press into place to secure. 3. Connect power cable to AC Adapter. & WARNING: • Do not use pliers or any other tools to tighten lock nut. DC power cable must be attached before charger unit is installed. • Do not plug in power supply unit until DC connection and charger are in place.
Adding a Charger To save space and reduce clutter, up to 4 chargers can share 1 power supply. 1. Unplug charger from the power source. 2. Insert set screws into the power pass-through connector. 3. Align units and tighten screws using the supplied alien wrench. Important: Do not overtighten. 4. Repeat above steps to add additional chargers. 5. Connect DC power cable to any input jack on the bottom of the charger. Note: One PS60 will supply power to up to four chargers.
Specifications Certifications Charge Current Meets essential requirements of the following European Directives: 0.75 A Charge Time • WEEE Directive 2002/96/EC, as amended by 2008/34/EC 50% = 1 hour; 100% = 3 hours • RoHS Directive 2011 /65/EU Note: Please follow your regional recycling scheme for batteries and electronic waste External Power Supply PS60 The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives.
LEG EN DARY PERFORMANCE' " United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone:+ 1 847-600-2000 Fax:+1847-600-1212(USA) Fax:+1 847-600-6446 Email: info@shure.com www.shure.com Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany Phone: +49-7262-92490 Fax: +49-7262-9249114 Email: info@shure.de www.shure.
Compliance Requirements Supplement Hereby, Shure Incorporated declares that this product has been determined to be in compliance with UKCA requirements. The full text of the UK declaration of conformity is available at the following site: https://www.shure.com/en-GB/support/declarations-of-conformity Hereby, Shure Incorporated declares that this product has been determined to be in compliance with European Union requirements.
