User's Manual

ManualsBrandsShure ManualsAudio EquipmentWireless Microphone Transmitter

FP Wireless System

Features

• AudioReferenceCompandingforcrystal-clearaudio

• AutomaticFrequencySelectionlocatesanopenfrequencyatthetouchofabutton

• AutomaticTransmitterSetupinstantlysyncsthetransmittertothereceiverfrequency

• Upto12compatiblesystemssimultaneously

• Allcomponentspoweredby2AAbatteries–nopowercordrequired

• Transmittergainattenuationcontrolmanagesinputlevel

FP1 Bodypack Transmitter

Lightweight,durablehous-

ing;forusewithTA4F-

connectionmicrophones

includinglavaliersand

headsets

FP2 Handheld Transmitter

Lightweight,durable

housing;availablewith

eitherthelegendary

ShureSM58

cardioid

dynamicwirelesscap-

suleorwiththeVP68

condenseromnidirec-

tionalcapsule;compat-

iblewithallShurewire-

lesscapsules

FP3 Plug-On Transmitter

Durablemetalhousing,

ergonomicallydesigned

forcomfortablegrip;

XLRconnectivityallows

forusewithanywireddynamicXLR

microphone

FP5 Portable Receiver

Lightweight,durable

housing,suitablefor

mountingoncameraor

person,diversityanten-

nas,outputviaTA3F

cabletoeitherXLRor

1/8”connectors.

Featuringacomprehensiveselectionofsystemconfigurationswithkeywirelessaudiotechnologiesandcomponents,FPWirelessprovidestheabilitytocap-

turecrystal-clearaudiowithconfidence.Withsimpleandflexiblecomponents,includingaportablereceiverandXLRplug-ontransmitter,ithasneverbeen

easierforaudiotobecapturedinthedemandinganddynamicvideographyandelectronicfieldproduction(EFP)environments.

Furnished Accessories

Micrphone Clip (FP2) Plug-on Transmitter Belt Clip and

Protective Skin (FP3)

Camera Shoe Mount (FP5) TA3F-to-XLRm Audio Cable

TA3F-to-3.5mm Dual-mono Audio

Cable

Summary of content (8 pages)

PAGE 1
FP Wireless System Featuring a comprehensive selection of system configurations with key wireless audio technologies and components, FP Wireless provides the ability to capture crystal-clear audio with confidence. With simple and flexible components, including a portable receiver and XLR plug-on transmitter, it has never been easier for audio to be captured in the demanding and dynamic videography and electronic field production (EFP) environments.
PAGE 2
Quickstart Install Batteries FP1 - FP5 Power up the FP5 Receiver FP2 FP3 Group scan for open frequencies Power up the transmitter Sync transmitter and receiver FP1 2
PAGE 3
FP1 FP5 FP2 3 1 5 PGXD 2 3 1 2 1 FP5 Receiver 3 ① Power LED Green Power on Yellow Low battery alert Red Critical low battery, replace immediately Flashing red on power up Battery dead 4 6 2 FP3 PGX1 7 5 Transmitter Controls and Connectors ① Indicator LED ② RF LED Green Ready Flashing green Controls locked ③ Power Button Flashing red IR transmission in progress Solid red Battery power low ④ Infrared (IR) port Flashing red on startup Batteries dead (transmitter cannot b
PAGE 4
Adjusting Gain FP2 FP1 and FP3 mic -10dB FP3 only: Adjust so the audio input level indicator flickers yellow at peak sound levels. BIAS AUDIO 0dB FP3 FP1 -10dB PGXD Access the gain adjustment switch by unscrewing the head of the FP2 microphone. Use the tip of a pen or a small screwdriver to move the switch: 0dB: For normal use. –10dB: Use only if audio distorts due to high SPL levels. 0 -10dB 0 mic Perform a sound check.
PAGE 5
Troubleshooting Issue Indicator Status Solution No sound or faint sound Transmitter power light on, receiver blue RF LED off Sync the transmitter to the receiver Transmitter power light on, receiver blue RF LED on Verify all sound system connections Receiver power LED off, red, or blinking red Insert fresh batteries or power on the receiver Transmitter power LED red or flashing red Replace transmitter batteries Transmitter power LED off Turn on transmitter Move closer to and maintain line-of-s
PAGE 6
SPECIFICATIONS Working Range Line of Sight 100 m (300 ft) Tonekey 32.768 kHz Audio Frequency Response 45–15000 Hz Total Harmonic Distortion Ref. ±38 kHz deviation with 1 kHz tone <0.5%, typical Dynamic Range >100 dB, A-weighted Operating Temperature Range -18°C (0°F) to +50°C (122°F) FP3 Note: Actual range depends on RF signal absorption, reflection and interference.
PAGE 7
Certifications FP1, FP2, FP3, FP5 FP1, FP2, FP3 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Type Accepted under FCC Parts 74. FCC: DD4FP3L, DD4FP3M, DD4FP3A, DD4FP3B, DD4FP3C, DD4SLX1G4, DD4SLX1G5, DD4SLX1, DD4SLX2G4, DD4SLX2G5, DD4SLX2. Meets requirements of the following standards: EN 300 422 Parts 1 and 2, EN 301 489 Parts 1 and 9, EN60065. Certified by IC in Canada under RSS-123 and RSS-102.
PAGE 8