AONIC 40 Wireless Noise Cancelling Headphones The Shure wireless headphones, AONIC 40, user guide. Version: 1.
Shure Incorporated Table of Contents AONIC 40 Wireless Noise Cancelling Headphones 3 General Description 3 Important Safety Information 3 ShurePlus™ PLAY Mobile Listening App 3 Bluetooth® Pairing 4 Multipoint pairing 4 Using the Buttons 4 LED indicator 7 Cable connections 7 Auto Power Off 8 Care and Maintenance 8 Storage 8 ShurePlus PLAY Mobile Listening App 8 General Description 9 Environment mode 9 PausePlus 9 Button Controls 10 Prompts & Tones 10 Auto Power Off 11 P
Shure Incorporated AONIC 40 Wireless Noise Cancelling Headphones General Description Crafted with premium materials and engineered by the brand creators and musicians trust, the AONIC 40 Wireless Noise Can celling Headphones deliver studio-quality sound in a portable and lightweight design. Enjoy the details in your music while blocking out unwanted sounds with adjustable noise cancellation. Or, let the outside world in with Environment Mode.
Shure Incorporated ® Bluetooth Pairing Headphones automatically enter pairing mode when you power them on the first time or when they have not been previously paired with this audio source. 1. From your audio source, select "Shure AONIC 40." 2. When successfully paired, you hear "Connected". Headphones automatically pair with previously paired devices when you power them on. After a few seconds you will hear “Connected”. Manual pairing 1. 2. 3. 4. 5. Turn off the headphones.
Shure Incorporated Using the Buttons Power button Power on Press and hold, 2 seconds Power off Press and hold, 2 seconds Pair Bluetooth Check battery status Clear paired device list 1. Turn off the headphones 2. Press and hold, 6 seconds Double press (audible status notification) 1. Turn off the headphones and plug into a charger 2.
Shure Incorporated Answer/End a call Press one time Decline a call Press and hold, 2 seconds Activate voice assistant Press and hold, 2 seconds Phone calls Answer/End a call Press one time Answer/End a call Press one time Decline a call Press and hold, 2 seconds Activate voice assistant Press and hold, 2 seconds Volume buttons Volume up Press + Volume down Press - Environment mode/ANC switch Active Noise Cancellation \ Environment mode Press one time Noise control off Press and hold
Shure Incorporated Hardware reset If the buttons do not respond to repeated presses, you can perform a hardware reset to force a power off. 1. Press the +, -, and power buttons simultaneously to immediately power off the headphones. This does not reset any values you may have changed. 2. Power on the headphones.
Shure Incorporated Auto Power Off You can configure the Auto Power Off feature in the PLAY app to turn off your headphones when not in use: 1. Select Device 2. Select Battery & Power 3. Specify the auto power off time in Power Off When Disconnected ◦ After 10 Minutes (default) ◦ After 1 Hour ◦ After 4 Hours ◦ Never Care and Maintenance To clean the headphones, use a soft, damp cloth. CAUTION: Do not use cleansers that contain solvents. Keep liquid and foreign objects out of the driver openings.
Shure Incorporated ShurePlus PLAY Mobile Listening App General Description The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound, or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wire less and True Wireless products in the device tab.
Shure Incorporated Button Controls You can customize the buttons for your earphones to control the features in the way that you want. You can control the button responses for: • Music and Audio • Phone calls • Volume Use Button Controls from the device home screen to access the Button Controls screen where you can customize the buttons for your earphones.
Shure Incorporated Auto Power Off You can configure the Auto Power Off feature in the PLAY app to turn off your headphones when not in use: 1. Select Device 2. Select Battery & Power 3. Specify the auto power off time in Power Off When Disconnected ◦ After 10 Minutes ◦ After 1 Hour ◦ After 4 Hours ◦ Never Preset Modes Use presets to quickly access commonly used listening scenarios. Seven selectable 4-band presets optimize settings for gain, equalization, and compression.
Shure Incorporated Create Custom Presets Add new preset 1. Scroll down to tap Add New Preset or tap Manual. New presets start out flat. 2. Adjust your frequency, gain, and bandwidth parameters. There are three ways to adjust your equalizer. ◦ Tap the values to type in a specific number. ◦ Tap the - or + to adjust in larger increments. ◦ Tap and drag the numbered circles for bigger changes. 3. Tap Save to name and save your new custom preset. Custom presets will show up after the list of Shure presets.
Shure Incorporated Use landscape for a close-up view of your EQ curves. Retaining EQ settings The presets and customized EQ get applied to whatever audio you are listening to and persist until you change them, even if you turn the headphones off. Updating the Firmware for Shure AONIC products Take advantage of additional features and design enhancements by updating the firmware on your AONIC product.
Shure Incorporated 6. After a successful update, the “Update Completed” confirmation screen appears. ◦ Do not power off the AONIC product until the update completes. ◦ Do not put the adapters back into the case during firmware update. It will cancel the update. ◦ Note: If the update fails on the first attempt, be sure to quit the app completely before attempting again. You may need to force quit the app to confirm that it isn’t running in the background.
Shure Incorporated Tips to ensure a reliable update • • • • • • Ensure that the mobile device and your AONIC product are powered on and near to one another. Using the product or mobile device while downloading may slow or cancel the update process. Update requires a minimum battery charge of 50% on your mobile device and on the AONIC product. Approximate download time for headphones and earphones is up to 30 minutes. Do not exit the PLAY app and ensure that your screen is on.
Shure Incorporated Specifications Model/Model: SBH2240 Transducer Type Dynamic, Neodymium magnet Driver Size 40 mm Frequency Response 20 to 20,000 Hz Sensitivity @ 1 kHz 94.7 dB/mW Impedance @ 1 kHz 31 Ω Maximum Input Power 500 mW Weight 313 g (11 oz.) Operating Temperature 0°C to 45°C (32°F to 113°F) Storage Temperature -10°C to 45°C (14°F to 113°F) Antenna Type Internal Inverted-F Gain +2.29 dBi Operating Frequency 2402 MHz2480 MHz Modulation Type FHSS RF Output Power +9.
Shure Incorporated Supported Codecs aptX, aptX HD, SBC, AAC SAFETY PRECAUTIONS Before using this product, please read and save the enclosed warnings and safety instructions. WARNING FOR ALL EARPHONES! Use, clean, and maintain earphones according to manufacturer’s instructions. SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage.
Shure Incorporated IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli fiers) that produce heat. 9.
Shure Incorporated Certifications Visit http://www.shure.com/earphones for the latest regulatory and compliance information. Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance. This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
Shure Incorporated This warranty is not transferable. This warranty does not apply in cases of abuse or misuse of the product, use contrary to Shure’s instruction, ordinary wear and tear, an act of God, negligent use, purchase from a party other than Shure or a Shure authorized reseller, unauthorized repair, or modification of the product.