Earphone Resource Center Sound Isolating™ Earphones Shure web site for all earphone related information.
Shure Incorporated Table of Contents Maintenance and Cleaning 11 Earphone Resource CenterSound Isolating™ Earphones 4 Cleaning the Earphone Nozzle SAFETY PRECAUTIONS For more information on how to wear Shure Earphones, view the How to Clean Shure Earphones video tutorial.
Shure Incorporated Headphone Amplifier Specifications Certifications LIMITED WARRANTY 23 FOR ORIGINAL PURCHASES IN AUSTRALIA ONLY 26 Service and Repair Information 26 Service Centers 27 24 25 3/27
Shure Incorporated Earphone Resource Center Sound Isolating™ Earphones SAFETY PRECAUTIONS Before using this product, please read and save the enclosed warnings and safety instructions. WARNING FOR ALL EARPHONES! Use, clean, and maintain earphones according to manufacturer’s instructions. SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage.
Shure Incorporated High sound pressure Hearing damage risk To prevent possible hearing damage, do not listen at high volume levels for long periods. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Shure Incorporated Information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Shure Incorporated For more information on how to wear Shure Earphones, view the How to Properly Fit and Wear Shure Earphones video tutorial. For more information on how to wear Shure Earphones, view the How to Change Shure Earphone Sleeves video tutorial. For more information on how to wear Shure Earphones, view the How to Clean Shure Earphones video tutorial.
Shure Incorporated Using Earphones Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove. Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber. Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands. Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.
Shure Incorporated The fit of the earphone can greatly affect sound quality. Wearing the Earphones The following are some suggested ways of wearing the earphones. Wear the cable over the ear and secure it behind the head to help keep the earphones in place during physical activity. Tighten the cable and take up slack by raising the cable cinch. Changing Sleeves • Twist and pull to remove the sleeve from the nozzle. • Slide on a new sleeve so that it completely covers the barb and the nozzle.
Shure Incorporated Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves). For more information on how to wear Shure Earphones, view the How to Change Shure Earphone Sleeves video tutorial. Removing the Earphones Grasp the body of earphone and gently twist to remove.
Shure Incorporated For more information on how to wear Shure Earphones, view the How to Properly Fit and Wear Shure Earphones video tutorial. Maintenance and Cleaning Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety. • Keep the earphones and sleeves as clean and dry as possible. • To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time.
Shure Incorporated ® Shure Bluetooth Earphones Shure Bluetooth earphones are designed for continued functionality with Bluetooth capable devices. They feature a three button controls with in-line microphone for phone calls and voice applications. Bluetooth Pairing 1. Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red. 2. From the bluetooth settings of your audio source, select your Shure bluetooth device. 3. LED turns blue when successfully paired.
Shure Incorporated 2. Intel Update Utility: This requires you to download the update app, run the app and allow it to scan your computer for required driver updates. Download the app here: Intel Update Utility. Note: The Intel Update Utility is recommended because it requires fewer steps. Refer to your PC user manual for more information. Bluetooth Accessory Quick Start Guides • BT1 quick start • BT2 quick start Charging the Earphones Red LED indicates low battery. 1.
Shure Incorporated Q.) Are my wireless Sound Isolating earphones designed for calls? A.) The Bluetooth 4 protocol has both headset and stereo audio playback features built-in. The two-way audio and remote functions are included in that protocol, and the inline microphone located on the right side cable is provid ed for calls and voice commands. Q.) Does the cable work with my iPhone/iPod/iPad/Android device? A.
Shure Incorporated even the most intense workouts. As such, these (and any earphones paired with the RMCE-BT1) are completely suitable for exercise. However, we cannot recommend use during any activities where awareness of surroundings are necessary (such as cycling or driving), and where prohibited by law. Q.) Why am I experiencing dropouts with my Bluetooth Sound Isolating earphones? A.
Shure Incorporated Some airlines permit Bluetooth use in-flight. Check with your airline provider before travelling with the SE112-BT1, SE215-BT1 or RMCE-BT1. The wireless Sound Isolating earphones may be ideal for iPhone 7 and other devices that do not have a standard headphone output as an alternative to the RMCE-LTG (for Lighting-equipped iOS devices, only).
Shure Incorporated A.) Hold down the multi-function center button (power/answer/end call) for 3 seconds to prompt voice command software. (Source device dependent) Q.) What device controls do the cable and earphones support? How do I use them? A.) The center button may be used for play, pause of media, and answering and ending phone calls. Volume up (+) button can also be depressed for 3 seconds to skip forward to the next song.
Shure Incorporated The MMCX connectors standard on most SE earphones, like the SE215 and SE846, mean you don’t have to choose between wired and wireless. Simply add an RMCE Remote + Mic accessory cable, RMCE-LTG (for iPhone 7 and iPhone 7 Plus), or the EAC64 replacement detachable cable (if the telephony features of the Remote + Mic cable isn’t required). Q.) What models of SE earphones are the RMCE-BT2 for? A.
Shure Incorporated In North America: Custom Earphone Sleeves Those who use earphones regularly for extended periods of time often find custom-fit molded sleeves offer the best comfort and sound isolation.Through a partnership between Shure Incorporated and Sensaphonics Hearing Conservation, custom sleeves are available for use with your Shure Sound Isolating™ Earphones. Please contact Sensaphonics for more information.
Shure Incorporated Sensitivity at 1 kHz SE535/535LTD Red 119 dB SPL/mW SE425 109 dB SPL/mW SE315 116 dB SPL/mW SE215 107 dB SPL/mW SE112 105 dB SPL/mW Impedance at 1 kHz SE535/535LTD Red 36 Ω SE425 22 Ω SE315 27 Ω SE215 17 Ω SE112 16 Ω Frequency Range SE535 18 Hz –19 kHz SE535LTD Red 18 Hz –19.5 kHz SE425 20 Hz –19 kHz SE315 22 Hz –18.5 kHz SE215 22 Hz –17.5 kHz SE112 25 Hz –17 kHz Input Connector Goldplated 3.5 mm (1/8”) stereo mini jack plug with 6.
Shure Incorporated Storage Temperature SE535 -29°C to 74°C (-20°F to 165°F) SE425 -29°C to 74°C (-20°F to 165°F) SE315 -29°C to 74°C (-20°F to 165°F) Bluetooth Specifications Integrated Microphone RMCE-BT1 MEMS RMCE-BT2 MEMS Polar Pattern RMCE-BT1 Omnidirectional RMCE-BT2 Omnidirectional Sensitivity RMCE-BT1 -11 dBV at 1 kHz (Pa=94 dB SPL) RMCE-BT2 -38 dBV at 1 kHz (Pa=94 dB SPL) Compatible Earphones RMCE-BT1 All Shure detachable earphones with MMCX con nectivity RMCE-BT2 All Shure de
Shure Incorporated Operating Frequency RMCE-BT1 2402 to 2480 MHz RMCE-BT2 2402 to 2480 MHz Modulation Type RMCE-BT1 FHSS RMCE-BT2 FHSS RF Output Power RMCE-BT1 +5.38 dBm (E.I.R.P) RMCE-BT2 +7.45 dBm (E.I.R.P) Supported Codecs RMCE-BT1 SBC RMCE-BT2 aptX™, aptX HD, aptX Low Latency, SBC, AAC Range RMCE-BT1 10 m (32.8 ft) RMCE-BT2 10 m (32.8 ft) Dimensions Cable Length SE112-BT1 760.0 mm (29.9 in.) RMCE-BT1 790.0 mm (31.1 in.) RMCE-BT2 736.6 mm (29.0 in.) Net Weight SE112-BT1 17.
Shure Incorporated Battery Specifications Battery Type RMCE-BT1 Rechargeable Li-Ion RMCE-BT2 Rechargeable Li-Ion Nominal Voltage RMCE-BT1 3.7 V DC RMCE-BT2 3.7 V DC Battery Life RMCE-BT1 up to 8 hours RMCE-BT2 up to 10 hours Total Battery Life RMCE-BT1 120 mAh RMCE-BT2 200 mAh Charging Requirements USB Source RMCE-BT1 5 V DC , 100 mA , minimum RMCE-BT2 5 V DC , 100 mA , minimum Charging Time RMCE-BT1 2 hours RMCE-BT2 2 hours Quick Charge RMCE-BT1 Up to 1.
Shure Incorporated THD+N Typical RMCE-BT1 0.1% RMCE-BT2 0.02% Frequency Response RMCE-BT1 10 to 22,000 Hz , +- 0.5 dB RMCE-BT2 10 to 22,000 Hz , +- 0.5 dB Output Impedance RMCE-BT1 3.9 Ω RMCE-BT2 0.6 Ω Certifications Visit http://www.shure.com/earphones for the latest regulatory and compliance information. Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance.
Shure Incorporated QualcommaptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Shure Incorporated This warranty does not restrict the rights of the consumer mandated under applicable laws. THIS WARRANTY SUPERSEDES ALL OTHER WARRANTIES THAT ARE ASSOCIATED OR INCLUDED WITH THIS PROD UCT, EXCEPT THAT ANY SOFTWARE CONTAINED IN OR PACKAGED WITH THIS PRODUCT IS EXCLUDED FROM THIS WARRANTY AND INSTEAD SHALL BE COVERED BY THE WARRANTY, IF ANY, PROVIDED IN SHURE’S END USER LI CENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.
Shure Incorporated Note: To receive service or repairs for your Shure product, you will be required to mail us your product. Start the Service and Repair Process Service Centers United States, Canada, Latin America, Caribbean Shure Incorporated Attn: Service Department 945 Chaddick Dr. Wheeling, IL 60090-6449 U.S.A. Europe, Middle East, and Africa Shure Europe GmbH Attn: Service Jakob-Dieffenbacher-Str.