Contents 1. Appearance………………………………………………………………………2 2. Getting started……………………………………………………………………2 3. Inputting…………………………………………………………………………8 4. Desktop …………………………………………………………………………9 5. Browsing web pages……………………………………………………………15 6. Typical applications……………………………………………………………15 7. Tips and other information……………………………………………………24 8. Customized settings……………………………………………………………29 9. Using HDMI……………………………………………………………………39 10. Locking the device……………………………………………………………40 11.
1.Appearance Production structure: 2. Getting started Note: Our Company spares no efforts to improve the product quality. Therefore, if there is any difference between the delivered product and the contents of the User’s Guide because of the upgrading of the software, the former shall prevail. Thank you for your understanding in this respect! 2.1 Charging the battery A battery is embedded in the handheld PC, which should be charged whenever the 2 PDF created with pdfFactory Pro trial version www.
power is low. Power adapter: To charge the battery, insert one end adapter into the outlet and the other end into the power jack on the device. 1. After the adapter is inserted, the battery indicator will turn red, which means the charging is in process. When the battery is fully charged, the indicator will turn green. At the time, you should unplug the adapter, while the indicator still remains green. 2. You can also use the handheld PC when the battery in it is being charged.
First close all files already opened from the card. Then click the menu, and select Setup →SD card’s memory→SD card 1→Uninstall SD card. At the time, the system indicates that “the SD card has been safely removed”. After that, press the card gently to allow it to project one part of it, and hold that part to pull out the whole card. Then the screen will indicate that “SD card was removed.” Note: 1. Insert the SD card properly. Otherwise, it may damage the card. 2.
internal memory of the device won’t be displayed. The folders of SD card are displayed as “SD card 1” and “SD card 2”. The folders of external flash disk are displayed as “Flash Disk 1” and “Flash Disk 2”. The system memory can only be used for storing the system files, with a capacity of 2GB. The capacity of the SD card and the external flash disk is subject to the device itself. The system can support an SD card of 32GB at maximum. For details of the memory, please refer to the part “8.
screen-locking interface. To save energy, if the electricity is insufficient in the sleeping mode, the system can power off itself after it is automatically powered on. 2.6 Vibration Power-on vibration: Click the setup icon the shortcut bar, and select settings for the voice and display mode. Then select the check box behind the “tactile feedback” and the vibration function is enabled.
setups. External flash disk: Connect an adapter box to the flat handheld PC and insert the flash disk into the USB port. Once it is properly connected, you can save and copy contents between the device and the PC. 2.9 Network connection Cable network: After you insert the network cable into the port designed for Ethernet on the adapter box connected to the PC, the icon “ETH” will appear on status bar at the top of the screen. Then the device will obtain the IP address automatically to access to the network.
To start connecting, select “connect” in the popped-up window. To eliminate the AP information, select “forget”; 8. If AP is not encrypted, you can select “connect” in the popped-up window to start connecting; 9. If AP is encrypted, you should enter the password in the popped-up window and then click “connect” to start connecting; 10. If the connection is successful, an icon indicating the successful connection will appear on the transfer bar at the top of the desktop. 3. Inputting 3.
icon to the shortcut bar at the bottom of the desktop; Drag: You can drag the icons to change their positions on the desktop or between pages, or move the application icons to the shortcut bar You can also use a pen rather than you finger to operate the touch screen. 3.3 Mouse The device is compatible with external mouse. After a mouse is connected, you can use the mouse for such operations as clicking, selecting, dragging, sliding or for right clicking to pop up the menu. 4. Desktop 4.
To enter the interface of application icons, click the button at the shortcut bar, as shown below: 10 PDF created with pdfFactory Pro trial version www.
To enter the interface of Gadget Mode, click . 4.3 Shortcut mode In the major interface of the Gadget Mode, you can press the menu button or click the icon Menu at the status bar. Then the shortcut menu icons will appear, which are Add, Wallpaper, Search, Notification, Desktop Setting and System Setting, as shown below: 11 PDF created with pdfFactory Pro trial version www.
4.4 Shortcut way to add gadgets 1. Shortcut mode To add a shortcut mode of an application to the desktop, press Menu→Add→Shortcut in the Gadget mode interface. Once added, you can click the shortcut icon to perform the related operations. 12 PDF created with pdfFactory Pro trial version www.
2. Widgets To add the widgets to the major screen, press Menu→Add→Widgets in the gadget mode interface. And then select the widget you want to add. Once added, you can click the shortcut icon to perform the related operations. 13 PDF created with pdfFactory Pro trial version www.
4.5 Using gadgets The user can add, delete and install the gadgets, add and delete application icons, and move the icons. You can also drag the icons between the operation areas or between operation area and shortcut bar. In the desktop gadget interface, long press the gadget icon, and a small square graphic and a recycling bin icon at the middle of the shortcut bar will be popped up. Drag the recycling bin icon to any place on the desktop, or drag it to the recycling bin to delete it.
5. Browsing web pages The user can access to the Internet through the browser. on the desktop, and you can access to the web Click the browser icon pages. The popped-up interface is shown below: 6. Typical applications 6.1 Email Click the email icon , you can enter the email interface, where you can perform the operations below: 1. Set the account for the email; 15 PDF created with pdfFactory Pro trial version www.
2. Write new emails; 3. Send and receive the emails; 4. Download or print the attachments. Tip: To pop up the shortcut menu, press the menu button. 6.2 File explorer To enter the file explorer interface, click the icon , as show below: Press the icon and hold it, the operation list will be popped up, where you can 16 PDF created with pdfFactory Pro trial version www.
perform such operations as move, copy, rename and delete, as shown below: Installing files If you want to install the files in the explorer, you only need to click the installation files with an extension name “APK”. At the time, a prompt window will be popped up, and then you can select Install to install the fife into the device. 6.3 Photo Frame Click the icon to enter the interface for picture browsing. You can also 17 PDF created with pdfFactory Pro trial version www.
play the pictures in a slide mode. After you click the button Menu, the shortcut menu of the electronic photo frame will be popped up, with which you can perform the operations below: 1. Random playing; 2. Sharing the pictures being played; 3. Setting time intervals for playing; 4. Setting the fold for playing; 5. Selection setup items. 6.4 Gallery Click the icon for the multimedia library, and the interface will be shown as below: 18 PDF created with pdfFactory Pro trial version www.
1. Click the menu button to pop up the shortcut menu, where such items as All Pictures, Multi-Option and Camera Settings are available. 19 PDF created with pdfFactory Pro trial version www.
2. Click All Pictures, and system will enter the slide playing mode. 3. Click Camera Settings, and you can enter the setup interface, as shown below: 20 PDF created with pdfFactory Pro trial version www.
4. Click the thumbnail at the picture library interface, and you can view the picture in full screen. Click the screen, and the zoom-in and zoom-out items will be popped up, where you can perform the related operations. Press the menu button, and the system will pop up the shortcut menu, where you can realize such operations as sharing picture, deleting picture and cropping, setting as wallpaper and clicking icon of contact people.
the option interface, as shown below: 6.5 Music Click the icon to enter the music mode. After you click the menu, the menu shown below will be popped up. You can select Play All, Party Shuffle or Shuffle All. 22 PDF created with pdfFactory Pro trial version www.
To enter the playing interface, click the song. 1. Click to enter the play list; 2. Click to enter the mode of Party Shuffle; 3. Click to switch over between Play All mode and Play Single mode; 4. Click the menu button to perform the operations below: Delete the current track, 23 PDF created with pdfFactory Pro trial version www.
add the current track to the play list or jump to the music library. 6.6 Camera Click to enter the mode for shooting pictures. To operate the device in this application: 1. Click the icon at the lower right angle to shoot the picture. You can save the picture to DCIM/CAMERA under SD root directory. 2. Move the slide block on the icon at the right, and you can change the shoot mode to video mode. 3.
7.2 Setting for shortcut operations 7.2.1 Access to Internet in a wireless way Click to enter the interface for wireless access to Internet, as shown below: 7.2.2 Access to Internet Click the internet access icon to access to the Internet. You can set the IP address manually, with the interface shown below: 25 PDF created with pdfFactory Pro trial version www.
7.2.3 Access to Internet through ADSL Click to reach the interface for dialing settings, as shown below: 26 PDF created with pdfFactory Pro trial version www.
After you enter the user name and password, you can click “connect” to access to the Internet. 7.2.4 Access to the Internet in 3G mode First of all you should buy a 3G wireless internet access card from China Telecom, China Mobile or China Unicom. At present, the network adapter which supports 3G internet access is branded as “Wangxun I916.
with more models. At any rate, the delivered product shall prevail. To access to the Internet in 3G mode, you must buy card with models mentioned above. To do that, you can place the card you bought into the 3G network adapter, and insert the adapter into the USB port of the device. At the time, the indicator for 3G Internet access will be illuminated. This means you can access to the Internet now, so please just click . Select the check box behind the 3G network item.
appearing in the screen, which means you can surfer on the Internet now. 7.3 About the battery The large-size LCD screen of the device will consume quite a lot electric power. To extend the working time of the battery, you may reduce the use of some functions. 1. Watch movies, listen to music or shoot pictures; 2. Brightness: Press Menu→Setup→Voice/Display(display setting)→Brightness (lower down the brightness); 3.
wireless way. Settings for 3G network If you want to set and manage connection point designed for 3G network, please press Menu→System Settings→Wireless Network→3G network setting. For details, please refer to the section “7.2.4 Access to the Internet in 3G mode.” 8.2 Access to the Internet Access to broadband network and Ethernet For details, please refer to the section “7.2.2 Access to Internet” and the section “7.2.3 Access to Internet through ADSL.” 8.
Mute mode To set the system to a mute, except for medium and alarm clock, you can press Menu→System Settings→Voice and Display (voice setting)→Mute. Medium volume To set the volume for the music and video, you can press Menu→System Settings→Voice and Display (voice setting)→Medium Volume. Notification ringing To set the default notification ringing, you can press Menu→System 31 PDF created with pdfFactory Pro trial version www.
Settings→Voice and Display (voice setting)→Notification Ringing. Selecting the operation ringing If you desire that there is a sound when a selection is made through the screen, you can press Menu→System Settings→Voice and Display (voice setting)→Tactile Feedback. If you want to use the soft key and use some UI interacted vibrations, you can press Menu→System Settings→Voice and Display (voice setting)→Tactile Feedback.
Display (voice setting)→Brightness. Standby mode To adjust the delayed time for screen locking, press Menu→System Settings→Voice and Display (voice setting)→Standby Mode. 8.4 Application Unknown resources Select this item to permit that application provided by the unauthorized electronic market can be installed Management for application To manage or delete the installed application, press Menu→System Settings→Application→Management.
Memory devices (SD card and flash disk) To view or perform operations for the memory devices, such as uninstalling, press Menu→System Settings→SD card and system memory. Then select a memory device under the related root directory, like SD card 1. After you enter the interface of the memory device, you can view the total capacity and the remaining capacity, or you can uninstall it. The interface is shown below. 34 PDF created with pdfFactory Pro trial version www.
System memory To view the system memory, press Menu→System Settings→SD Card and System Memory. Under its root directory, you can view the system memory. 8.6 OSD Language and keyboard In this item, you can set the OSD language and region、character entering and automatic correction. 35 PDF created with pdfFactory Pro trial version www.
Select OSD language and region To select the OSD language and region, press Menu→System Settings→OSD language and keyboard→Select OSD language. Android keyboard To set Android keyboard, press Menu→System Settings→OSD language and keyboard→Android keyboard. User-defined dictionary To add words into or delete words from the user-defined dictionary, press 36 PDF created with pdfFactory Pro trial version www.
Menu→System Settings→OSD language and keyboard→User-defined dictionary. 8.7 Date and time To set the date, time, time zone, time system and format, you can press Menu→System Settings→Date and time. 8.8 Screen calibration To calibrate the screen, press Menu→System Settings→Screen calibration. Then calibrate the touch screen by following the prompts. After that, the system will prompt you to return to the settings list. 37 PDF created with pdfFactory Pro trial version www.
8.9 About the device In this item, you can view the information on law, device status and software version. Status To view the status of the battery, power-on time and WIFI address, press Menu→System Settings→About the device→Status. Information on law To view the information on law, press Menu→System Settings→About the 38 PDF created with pdfFactory Pro trial version www.
device→Information on law. Model To view the mode, press Menu→System Settings→About the device→Model. Firmware version To view the firmware version, press Menu→System Settings→About the device→Firmware version. Version No. To view the version No., press Menu→System Settings→About the device→Version No. 9. Using HDMI With HDMI, video contents being played by the flat handheld PC can be transferred to HDMI monitor (like a TV set with HDMI port) for playing.
may wait with patience. 5. You can transfer the contents to the PC again by any of the four ways below: 1) System transfers to PC automatically after the playing is completed. 2) Press Menu during playing to switch the video contents to the PC. 3) Pull out the HDMI cable during playing, after which the video contents will be transferred to the PC. 4) Press Back to exit the playing mode, after which the video contents will be transferred to the PC. 10.
enter the interface of system settings, where you can select Application→Running Services, as shown below: Click the application to be closed, and the system will pop up a window which asks you whether you need to stop the service window, as shown below: 41 PDF created with pdfFactory Pro trial version www.
Click Stop, and the application will be closed and disappear within the window being used. 11.2 Compulsory power-off 1. Press the power switch and hold down for 7 seconds, the device will be powered off in a compulsory way. 2. Press Rest at the right lower part of the device, the device will be powered off in a compulsory way. 42 PDF created with pdfFactory Pro trial version www.
11.3 Restore defaults If you want to restore the factory defaults and delete all other data, please press Menu→System Settings→Privacy→Defaults Warning: Once you select Reset, the Google account, data and settings of the system and application and the downloaded applications will be deleted. Thus, be careful when using this function. l This device complies with Part 15 of the FCC Rules.
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l -- Reorient or relocate the receiving antenna. l -- Increase the separation between the equipment and receiver. l -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l -- Consult the dealer or an experienced radio/TV technician for help.
