MID P0108 Quick Start Guide Thank you choosing for thiproduct.
Description of the device 1 2 3 4 5 6 7 8 9 10 11 12 13 1 Power button Volume down Volume up Menu Home button (Top) Headphone Jack DC Jack USB Host USB OTG Mini HDMI port MicroSD card slot Speaker left Speaker right
14 Camera 15 Microphone 16 Home button front Starting up Before using your disgo for the first time, please charge the battery completely. Charging the battery a) Connect the supplied power cable to the Tablet 8100 power connector and the wall outlet. b) Please allow a minimum of 4 hours for a full charge of the battery.
On screen setup When the device starts up, you may be required to calibrate the screen. Please follow the onscreen instructions to complete the calibration. The main desktop screen will load when the calibration is complete. disgo tablet 8100 interface The disgo device uses a full touchscreen. All areas of the touchscreen will react when you tap on it with your finger.
Menu bar icons explained Home Touch on Home to return to the desktop.
that are open. Displays the connection status of the Wi‐Fi. Shows the charge status of the battery. Shows current time Decreases volume Increases volume Shows menu of the current open application on the bottom of the screen Returns to the previously viewed screen Wi‐Fi Indicator Battery Indicator Time Indicator Volume Down Volume Up Menu Back The menu bar will change depending on which screen is being displayed.
Slide your finger horizontally on the display to go to the left or right of the extended screen.
Customising the Home screen To add a Home screen icon (shortcut, widget, etc), hold your finger on an empty area of the screen, then choose the required option from the drop‐down menu You can also touch the Menu icon, to add an icon as well as access the Settings menu, change the wallpaper and perform a Search on the device.
The application screen can be accessed by pressing the application icon, on the Home screen. The Application screen gives access to all pre‐loaded and downloaded apps on the device, including Mail, Music and Video player, etc. Tap on any icon to open the corresponding application. You can get more Android applications from the GetJar market, which can be found on the Application screen.
The Tablet 8100 connects to the internet over a Wi‐Fi network. If you have connected the device to a network previously, it will attempt to reconnect to the network. a) To configure a new Wi‐Fi connection, go to the Home screen, tap the Menu icon and then select Settings. b) In the Settings screen, select Wireless & Networks. c) If the Wi‐Fi is off, tap on the Wi‐Fi option to turn it on. The checkmark will be visible if the Wi‐Fi is already on.
The Tablet 8100 will connect directly to your PC to allow file transfer. Please use the USB ‘OTG’ port, which is located beside the HDMI port. When connected, the PC will recognise any MicroSD card or USB drive which is attached to the Tablet. Also, media files can be transferred directly onto the MicroSD card. a) Remove the MicroSD card with the Tablet 8100 powered off or use dismount procedure, see user manual at www.mydisgo.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.