General Description of Function It is able to use the camera for a digital photo of maximum 8 mega pixels picture, and is able to shoot AVI short film. The camera is able to auto adjust exposure and color balance. The product can be used as a PC camera when connecting with computer. The contents covered in the manual were referred to the latest information when the manual was compiled. The screen display and illustration, etc.
whether the camera operates normally or not before using the camera again. If dirt or stain is accumulated on the camera or lens, it is required to use a piece of soft, clean and dry cloth to wipe it out lightly. If the camera or lens is stained with sand grain, it is available to blow it away lightly. Never use cloth to wipe. Otherwise, it may scrape the camera or lens surface.
7. The memory card outruns its service life (please purchase regularly a new memory card.) System requirements System Requirements Operating System Microsoft Windows 98 SE, Me, 2000, XP, Vista Central Processing Above Intel Pentium 166MHz or CPU of equal performance unit Memory Above 128 MB Sound Card, Display The sound card and the display card shall support DirectX8 or Card higher version. CD Driver 4 times of speed or above Hard Disk Surplus space above 500 MB Other One standard USB 1.
Description of outline and button 4
Start to use _______ 1. Install Battery 1. Open the battery lid 2. Put 4 pieces of AAA (7#) batteries in according to the polarity instruction. 3. Insert the front end of the battery lid into the battery stack, press the back end of the battery lid and then push the battery lid inwards to allow the battery lid to closely attach the body.
2. Use SD Card 1. Push the SD card into the slot until it is completely inserted according to instructions. 2. Lightly press the card end inwards and the SD card will eject. 3. Power on and off 1. Power on: press the power key for a while, light the screen and the unit will be power on. 2. Power off: press the power key once while camera is idle state, it will be power off. Auto power off: While the camera is idle for 1 minute, it will be power off automatically.
At setting window, adjust the date or time by direction key: Up or Down for adjust, Right key for move the cursor, OK key for confirm, Left for exit setup mode. 5 Video mode: Preview mode 1 :Mode symbol, Indicate is video mode. 2 Auto: Indicate the White balance is auto mode. Can set it is Auto/Daylight/Cloudy/ Fluorescent/Tungsten. 3 Metering mode: Center/Multi/Spot 4 01:01:01: time counter, It is indicate can recoding 1 minute 8 seconds movie.
Shooting: 1 Switch on the camera by press Power key to enter preview mode; 2 Press Shutter key to start recoding movie; 3 If you want to stop recoding, press Shutter key again; and if the memory card full, It will stop recoding automatically. 4 You can do zoom in or zoom out operation during recording by Zoom key. The max. window is 4X for digital zoom.
Video menu At video preview mode, press OK key enter main menu: 9
6 Camera mode: Preview mode 1 :Mode symbol, Indicate is video mode. 2 3 :Self timer mode symbol. Auto: Indicate the White balance is auto mode. 4 : Metering mode. 5 : Exposure mode. 6 : Image resolution mode. 7 : Image quality mode. 8 : Image counter(default is reduce). 9 :SD icon, it will be display while there is SD/MMC card was plug in. 10 :Battery icon.
Shooting: 1 Switch on the camera by press Power key to enter video preview mode; 2 Press Mode key once to switch to Camera preview mode; 3 Press Shutter key once to snap one photo; Camera mode menu: At camera preview mode, press OK key enter main menu: 12
Self timer: Set the Driver mode is Self timer 2s or 10s at menu, then press Shutter key will time with beep, after 2 seconds or 10 seconds, the camera will snap one photo automatically Continuously take three photos: Set the Driver mode is Burst at menu, then press Shutter key will snap three photos continuously 15
7 Playback mode: Enter Playback mode Press mode key continuously can enter Playback mode or press it twice to enter Playback mode after press Power key switch on the camera.
Thumbnail mode Press Zoom out key can enter thumbnail mode at playback mode: Note: : This icon indicate that is one AVI media file. : This icon indicate that is one JPG file with voice memo.
to exit this thumbnail mode return full screen mode. Play AVI file Press Shutter key to start play the selected AVI files at playback mode, and you can press Shutter key again to stop playing.
Play JPG(with voice memo) file 1 Select the photo was added voice memo at playback mode; 2 Press Shutter key to start play the selected jpg(with voice memo) file: Press OK key to stop playing, UP key to pause/resume playing, 1 2 3 4 Playback mode icon Counter of image Voice Memo indicator Indicator of JPG file 5 Timer of playing 6 Control panel for playing 19
Playback menu: At Playback mode, press OK key enter main menu: 20
Add effect for image Add distort effect for image 21
Resize function: The image size selected must be smaller than the size of current photo.
Add Voice Memo for image: The time of Voice Memo can be recorded about 30s only 23
Print the photo: 1 Playback one photo; 2 press the [Print] button; 3 Connect the camera to printer Fig.1 fig.2 fig.3 If at like above fig.2 mode, you press the MENU key will exit printing mode.
8 Setup mode: Press OK key at preview or playback mode and then press direction of Right key once will enter Setup mode. You can choose the menu item by Up or Down key, enter or exit submenu by Left or Right key, and confirm setting by OK key.
Note: 1 The files stored in card will be lost due to format operation, please backup the data before formatting the memory card. 2 The “My image” menu can be activated while you had set “Start-up Image” function.
Application to PC _______ 1 Connect to PC Please install the drive program first before connecting the camera to the computer. The camera there are two USB mode, they are MSDC and PCCAM, default is MSDC mode, Turn on the camera power. If the PC camera function of the camera is to be used, set the camera is PCCAM mode at setup menu. If the removable disc function of the camera is to be used, please set the camera is MSDC mode at setup mode.
2 Install Software Insert the accompanied CD into CD-ROM, and the installation guide program will run automatically, the installation guide window appearing.
Install Driver Click the Install Driver button to finish installation step by step according to the clew. After finishing installation, please restart the computer. Note: Before installing the driver, do not connect the camera with the computer in order to avoid the install error. MediaImpression Installation and Use: Install Mediainpression: Click “Install MediaImpression” button and complete the installation as per the tips.
After installation, please restart the computer. Run MediaImpression : Double click the MediaImpression icon on the desktop or follow “Start → Programs” to open: After starting MediaImpression, click the “Import” to import the media.
Choose the video camera storage and choose the output location. Choose require file and click the import, selected file will be stored in the output location.
Click “Go to start page” to return the main screen, click the “Video” or “All media” to use the “YouTube” function. Choose file and click the “upload to YouTube.
Enter you username and password to login the YouTube, execute upload.
Technical Parameters Image sensor Function mode Lens Focal distance Digital zoom Shutter LCD display Picture resolution Video record resolution White balance Exposure Self-shoot timer File format Memory medium USB interface Power supply 2.0 Mega Pixels(CMOS) Video, Still photo, playback, Mass storage and PC camera F3.1 f=6.5mm 120cm~infinity (standard mode) 4× Electronic shutter 2.0〞TFT LCD 3264x2448(8M), 2592x1944(5.0M), 1280x1024(1.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
the Connect the equipment into an outlet on a circuit different from that to which receiver is connected. Consult the dealer or an experienced radio/TV technician for help. . Shielded USB cables must be used with this unit to ensure compliance with the the Class B FCC limits.