Contents Contents………………………………………………………………………………………………………1 Function Description………………………………………………………………………………………...2 Notice for use…………………………………………………………………………………………………2 System requirements………………………………………………………………………………………4 Start to use……………………………………………………………………………………………………5 A p p l i c a t i o n o f A t ta c h e d A r c S o f t M e d i a I m p r e s s i o n … … … … … … … … … … … 1 2 Product specifications……………………………………………………………………………………18 Standard accessories……………………………………………………………………………………..
Function Description: Welcome to purchase and use this digital video camera. Before use, please read this user manual carefully. With this digital video camera, you can take 300,000 pixels (VGA format) and 100,000 pixels (QVGA format) video shorts or photos. With the playback function, you can playback the taken video or photos with this digital video camera; in addition, you can download the video and photo from the digital video camera into your PC.
documents in the digital video camera in the proper storage position. 6. When storing documents into the memory or the memory card, make sure that the size of the documents does not exceed the capacity of the memory. Maintenance and care: 1. In use, always wear the wrist band so as to prevent slip. 2. Use proper protection sheath to avoid scratching the lens and screen. 3. To clean the lens, firstly blow away the dust on its surface, then use proper cloth or tissue for optical devices to clean the lens.
System requirements: When operating and using this digital video camera, be sure to meet the requirements on the basic system for computer. It is strongly recommended to use the best computer units to operate the camera so as to bring its functions into full play. Below are the requirements on the basic system: Operation System CPU Memory Sound card and display card CD-ROM Hard Disk Other Microsoft Windows Me,2000,XP, vista Above Intel PIII667 or CPU of equal performance Above 128 MB DirectX8 or above.
Start to use: 1.
LCD Shutter key Up key Mode/play key Delete key Left key Right key Down key 6
2. Basic operation 2.1 Install battery Slide down the Battery Cover and insert two new AA alkaline batteries. Align with correct polarity of battery terminals. Close the Battery Cover. 2.2 Use SD/MMC card Insert the SD Memory card into the SD/MCC Card Slot. Push it down until the card stays latched.Do not force – check card’s position according to the position mark on the camera. Push and release inserted card if you wish to remove or replace the card.
In power-on state, let the camera idle for 1 minute to power off the camera automatically. In power-on state, when battery level is very low, the red icon on the bottom left of the screen will flash and the camera will turn off after one second. You must replace the batteries. 2.4 Change mode After power on, it will enter video record mode, press mode/play key to change mode between video record and capture. In video record or capture mode, press left key or right to enter playback mode.
2.7 Capture In capture mode, press the shutter key to take a photo. 2.8 Playback videos and photos In playback mode, press left or right key to select another file. Press mode/play key to begin/stop play video, and press up key or down key to zoom in/out photo. Note: While the memory full for recording, the LCD will display "Memory Full", then the Camera will stop recording automatically.
TV,red(or white) port of the other terminal should be connected to AUDIO IN port of TV. 2.10 Delete files Press the delete key once to display “Delete File?”, press the delete key again to carry out deletion and display “File Deleting”, if press other keys to cancel the deletion and display “Not Deleted”. When there are no files in the memory: Press the delete key will display “No File”. 2.11 Connect to PC 1. Slide the USB Switch UP to extend the USB connector. And t urn the camcorder ON. 2.
▲ Open USB port ▲Connect camera to PC (1) ▲ Connect camera to PC (2) 11
Application of Attached ArcSoft MediaImpression: How to upload your video clips to YouTube 1. Install the ArcSoft MediaImpression program Insert the CD-ROM into the computer’s CD-ROM drive. The auto-run screen will appear. If the CD driver does not automatically carry out or close such function, please click autorun.exe program under the root directory of the CD.
Click “Install MediaImpression”, Follow on-screen instructions and complete installation ArcSoft MediaImpression icon will appear on computer’s desktop when installation is complete. 2. Using ArcSoft MediaImpression Connect your camcorder to the computer. Double click MediaImpression icon on the Desktop.
Click Import Option on the main screen and enter into “Import” screen. Then select the files in the camcorder that you want to upload to the computer and click After importing the file has been completed, click into “MediaBrowser” window. 14 Option.
Note: On the main screen, you can also click other options such as to enter into”MediaBrowser” window. Then select the files in the computer for uploading. Select the video you wish upload to You Tube on”MediaBrowser”screen and then click option to access your YouTube log-in screen.
On”Login”screen, please enter your YouTube Username and Password (you can select the corresponding option underneath to save the Username and Password so that you do not need to input these data next time). Then click option.
When”Upload to YouTube”screen appears, fill in Title, Description, etc. Then click and start uploading selected video. Click “Cancel” if you wish to stop upload, otherwise continue for successful uploading.
Product specifications: Image sensor Function mode Lens Focus range Digital focusing Shutter LCD display Resolution White balance Exposure File format Video out Storage media USB port Dimension (LxWxH) Weight 300,000pixels Record, playback, mobile disk, deletion F2.4 f=3.6mm 120cm~infinite 4× Electronic 2.0 inch TFT Display VGA 640×480, QVGA 320×240 Automatic Automatic AVI TV out SD/MMC card(max. 4GB) USB2.0 port 112.6 mm×58.6 mm×28.
Standard accessories: 1. Installation CD 2. User manual 3. USB extension cable 4. TV cable Note: The USB extended cable with ferrite bead and the TV cable extended cable with ferrite ring is designed for exclusive use with this product. Don’t use others for this product.