DVH1200 User Manual
Introduction Thank you for choosing this camera. The product adopts high-performance chip which can achieve HD video, motion graphics with strong continuity, support AVI video format, and take clear photograph. The product, with unique portable design, can be applied to various fields, and provide you convenient, safe and colorful life. Please carefully read this manual before using. Keep the manual in a safe place for future reference. The compilation of the user manual refers to the latest information.
or dust on the camera or lens, blow the sand or dust off the camera or lens. Do not use cloth to wipe, otherwise, the surface of camera or lens may be scratched. In case of cleaning the surface of camera lens, first blow the dust off the surface, use a cloth or paper available to optical equipment to wipe the lens gently. Use the professional camera cleanser to clean the lens. Do not use any organic solvent. Do not touch the lens surface by fingers.
Product Profile Compact size and convenient installation. The product adopts high-performance chip which can achieve HD video, motion graphics with strong continuity. The video recording is available even under low illumination. Support AVI video format. Support FHD (1920 x 1080), HD (1280x720) and VGA(640x480) for recording. Sizes of 12M, 8M, 5M, 3M, 1M available for photographing. Support high-speed USB2.0. Support maximum 32G TF card.
Appearance and Keys Micro USB LCD screen Reset Indicator Micro SD Microphone Shutter/Confirm key Power/Mode key 4
Up key Tapped hole for tripod Lens Down key Menu key 5
Start to use 1. Charge the built-in lithium battery Charging indicator Connect the camera to computer for the charging undertoshutdown Connect computer USB portstatus. The charging indicator will be on when charging, and will be off when the battery is fully charged. Generally, the battery can be fully charged after 2-4 hours.
2. How to use the memory card 2.1 Properly insert the TF card into the card holder as per the instructions indicated near the card holder. 2.2 To remove the TF card, press the end of memory card gently, the card will be ejected. Note:The camera is not equipped with built-in memory. Please insert memory card before using. 3. Startup and shutdown 3.1 Startup: press the POWER key for 3 seconds, the camera will show startup screen and enters into POWER ON state. 3.
4. Function modes switching The camera has 3 modes: photo mode, video mode, and playback mode. Press the power key to switch the modes after starting up. Photo mode: for taking photos. Video mode: for recording videos. Playback mode: for playing back the current photo or video. 5. Indicator light 5.1 BUSY indicator: When the camera is working (e.g. recording, photographing, auto screen off etc.), the indicator will be ON. 5.
7. Photo mode Press the Power key to switch to photo mode. Press the Shutter key under preview state can take one photo. 1. Photo mode 6. Photo quality 2. White Balance mode 7. Available shooting count 3. Metering mode 8. SD card inserted 4. Exposure mode 9. Icon of digital zoom 5. Photo resolution 10.Battery state 8. Playback mode 8.1 Press the Power key to switch to playback mode. Press the Up key or Down key under preview state to play the previous or next photo or video.
8.2 When playback video files, press the Shutter key to play, press the Up key to pause, then press the Up key again to continue to play, and press the MENU key to stop play. 8.3 In playback mode, long press the Shutter key to switch to the travel video files. Then press the Shutter key to play files, press the Up key to pause, and press the MENU key to stop play. 8.4 File operation: In playback mode, press the MENU key to enter into the menu to lock, delete or slide show recorded files.
Menu of photo mode Menu of video mode Menu of setup mode 9.2 After entering the menu mode, short press the POWER key to switch between the shooting mode and setup mode. Then press Up key or Down key to select the menu items, press Shutter key to confirm the selection and press MENU key to cancel the selection or exit from the menu. Application on PC The camera has Plug and Play function. Use a USB cable to connect the camera to PC under Power On state to switch to removable hard disk mode.
Installation of Driver and Software The accessory CD contains the camera driver and provided software MAGIX Video easy SE / MAGIX Photo Manager MX (for photo and video processing). Installation interface:Please insert the CD into the CD-ROM, the system will automatically run the installer in the CD, and the screen shows the installation wizard window as below. (The installer may take several seconds to start, depending on the PC performance.
Run the software MAGIX Video easy SE / MAGIX Photo Manager MX: Please click the button in the wizard window and follow the prompt to install step by step. For usage, please click the “User Manual” button in the installation wizard window.
Use as Computer Camera After connecting the camera to computer, press the shutter key to enter Camera mode. Before using the camera function, please check whether the computer has been installed with camera driver. After installing the driver, find a shortcut icon in the menu of “SPCA1628PC Driver” which is newly to open the AMCAP window which will added in “Start→All Programs”. Click the shortcut icon show the video shot by the camera.
Technical Parameters Image sensor 1.3 Mega Pixels CMOS Sensor Function mode Video, photo, playback Lens F1.05, f=4.1mm Digital zoom 4X Shutter Electronic shutter LCD display 2.0 inch LCD Photo resolution 12M(4000×3000), 8M(3264×2448), 5M(2592×1944), 3M(2048×1536), 1M(1280 ×960) Video resolution FHD (1920 x 1080), HD (1280x720), VGA (640x480) White balance Auto/Daylight/Cloudy/Fluorescent/Tungsten Exposure Storage medium -2.0 ~ +2.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. This device complies with Part 15 of the FCC Rules.