User’s Manual Mode:DV4000 1
Product Introduction This product is compact in size, and very easy for installation; The camera supports FHD (1920x1080 25FPS) recording; Support high-speed USB2.0; Support 32GB Min SD Card at most; This product supports video output with playback function; it also supports HD picture.
System Requirements Operating PC Camera Mode (PCCAM) System Microsoft System: Microsoft WindowsXP(SP3), Vista, 7, 8 iOS system: MAC OS X Version 10.8.0 or latest version Removable (MSDC) Disc Mode Microsoft System: Microsoft Windows2000, XP, Vista, 7, 8 iOS system: MAC OS X Version: 10.0.0 or latest version CPU Intel Pentium 1GBHz or CPU with equivalent performance Internal Memory More than 1GB Sound card and Graphic card Support DirectX8 or advanced versions.
Appearance and Buttons Introduction 4
1. On/Off/MODE/Back 2. Lens 3. Display Screen 4. Work Indicator 5. Charging Indicator 6.OK /Menu/Confirm 7. Battery Cover 8. Battery Compartment Switch 9. Microphone Hole 10. USB Port 11. TF Card Slot 12. HDMI Port 13.T Button (Upper button for Zoom +) 14.
Initial Use_______ Use_______ 1. Charge External Lithium Battery USB Cable Connect the camera with PC for charging, and the charging indicator (blue) will be on. The indicator will be off when the charging is completed. Generally, it takes 2-4 hours to fully charge the camera. 2. Use Storage Card 1. According to the recessed reminder beside the storage card slot, push the TF Card completely into the end. 2. Gently press the rear part of the storage card, and it will automatically pop out.
Note: There is no built-in memorizer for this camera. Please insert a storage card when using the camera. (High-quality TF Card is recommended.) 3. Start up/Shut Down 3.1 Start up: Keep pressing MODE button for 3s, the display screen will be on, and the camera enters Start-up status. 3.2. Shut down: Under idle mode, press MODE button and hold on 3s to shut the camera down. 3.3.
4. Function Mode Switch This Camera has 3 modes including video recording mode, photo mode and playback mode. When it is on, press MODE to switch different modes. 5. Indicator Work Indicator (Red): When the camera is working (such as recording a video, taking a photo, shutdown and automatic shutdown of screen etc.), the work indicator will flicker. Charging Indicator (Blue): During the charging process, this indicator will be on; when the camera is fully charged, it will automatically go out. 6.
7 It means that White Balance is automatic. 8 Charging Indicator. 9 Work Indicator. 8. Photo Mode: When it is on, press MODE Button to enter Photo Mode; under the preview status, press OK button to take a photo: 1 Mode Icon to indicate current Photo Mode. 2 Picture size; click this icon to choose 3M/5M/8M/10M/12M. 3 Counter, meaning the quantity of photo which can be taken. 4 It means that TF Card is inserted. 5 Battery Power Icon. 6 It means current sharpness. 7 E/V (Exposure Value).
11 Work Indicator . 9. Playback Mode: 9.
10. Menu Operation: There are different menus under every work mode, and the following Menus are for your reference: Video Recording Mode Menu Photo Mode Menu System Setting Mode Menu Playback Mode Menu Operation: Press OK button for a while, and LCD will display relevant Mode Menu; press OK cursor to select a Menu, and then press T or W button to move the cursor up or down; press OK again for confirmation, and press Power button to go back or quit the Menu Mode.
Connect to HD TV: It is possible to connect the camera to HD TV via HDMI Cable (as shown in the following Figure), and the display signal of the camera will be automatically transmitted to HD TV, allowing the user to view HD videos or photos via HD TV.
Connect to PC_ PC______ 1. The camera is available for usage when plugged; when it is powered on, connect the camera to PC via USB cable, and it will automatically switch to removable disc mode. Removable Disc Icon will appear in the window of My Computer. Photos taken by the user will be saved in I:\jpg folder (I means this device’s Removable Disc), videos recorded in I:\video folder, and Car DVR files in I:\CAR folder.
PC CAM Function is available in Windows XP(SP3)/ MAC OS X version: 10.8.0 or more advanced version.
Technical Parameters Image Sensor 1.3 CMOS Function Mode Video Recording, Photo and Playback Mode Lens F2.4 LCD 1.77 inches LCD Picture Resolution 12M, 8M, 5M, 3M, 2M, and 1M f=3.0mm Storage Medium FHD: 1920x1080(25fps) interpolation, HD: 1280x720(30fps), VGA: 640x480(30fp) Video AVI Picture JPG TF Card (32GB at most) USB Port High-speed USB 2.0 port Power Supply External 3.7V chargeable lithium battery 400mAh Dimensions 59x41x24.
Label Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
