Contents Contents .......................................................................................................................................................... 0 Function Description ...................................................................................................................................... 1 Notice for use..................................................................................................................................................
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
General: 1. Never open the housing of the digital video camera; otherwise, some parts may cause electric shock. 2. Damp, pressure, collision and overheat may damage this digital video camera. Memory and storage: 1. SD/MMC/SDHC can be used (but not included in the packing list and maximal capacity 16GB). 2. When buying SD/MMC/SDHC card, be sure to take the digital video camera with you so as to ensure compatibility. 3.
. When left idle for long, keep the digital video camera with the battery taken out in dry and dark place. Other notices: 1. When switching video output between LCD display and video devices, be sure to exit from the play or record state. 2. This digital video camera is suitable the environment between 0℃- 40℃ (32℉-104℉). Never keep the digital video camera in the place at extremely high temperature, such as in the car parking under the burning sun, or with much damp.
Sound card and display card CD-ROM Hard Disk Other DirectX8 or above. 4× speed or above 1 GB space above useable One standard USB 1.1 or USB 2.
1.
USB switch Microphone Lens LED indictor Speaker 7
2. Basic operation 2.1 Install battery Press / slide down the Battery Cover and insert 3pcs AAA battery. Align with correct polarity of battery terminals. then close the Battery Cover. 2.2 Use SD/MMC/SDHC card Insert the SD Memory card into the SD/MMC/SDHC Card Slot. Push it down until the card stays latched. Do not force – check card’s position according to the position mark on the camera. Push and release inserted card if you wish to remove or replace the card.
2.3 Power on/off In power-off state, press the power key to power on the camera. In power-on state, press the power key to power off the camera. In power-on state, let the camera idle for 1 minute(default)to power off the camera automatically. In power-on state, when battery level is very low, the camera will turn off after several seconds. You must replace the batteries. 2.
2.6 Still photo record In Still photo record mode, Press Shutter key can snap one photo, At preview or recording mode, Press Up key or Down key can zoom in or zoom out the image. Note: While the memory card is full or locked, and you press the Shutter key, the camera will not recording. Before inert or remove the card, please turn off the camera first. 2.7 Playback videos or photos Press Mode key to enter playback mode, press ◄ key or ► key to select another file.
2 Delete files When in playback mode, Press the Delete key will enter Delete menu mode, use direction key of Left or Right to select “All”, ”No” or “Yes” . Select “Yes” then press OK key will delete current image; if select “All” then press OK key will delete all images, if select ”No” or press Delete key will exit deletion. 3 Connect to PC 1. Slide the USB Switch DOWN to extend the USB connector. And turn the camcorder ON. 2.
▲ Open USB port ▲Connect camera to PC (1) ▲ Connect camera to PC (2) 12
Application of Attached ArcSoft MediaImpression There is one software in CD provided for image processing: MediaImpression Introduction interface for software installation Put the CD attached into the CD-ROM of the computer, then the following menu will occur: 13
If the CD driver does not automatically carry out or close such function, please double click autorun.exe program under the root directory of the CD. MediaImpression Installation and Use: Install Mediainpression: Click “Install MediaImpression” button and complete the installation as per the tips.
After installation, please restart the computer.
After starting MediaImpression, click the “Import” to import the media.
Choose the video camera storage and choose the output location.
Choose require file and click the import, selected file will be stored in the output location. Click “Go to start page” to return the main screen, click the “Video” or “All media” to use the “YouTube” function.
Choose file and click the “upload to YouTube. Enter your username and password to login the YouTube, execute upload.
Product specifications: Image Sensor Function Mode Lens Focus Range Digital Zoom Shutter LCD Display Resolution White Balance Exposure File Format Storage Media USB Port Dimension (LxWxH) 300K Pixels Record video, Record still photo, playback, mobile disk, F2.8, f=3.8mm 120cm~infinite 4× Electronic 1.77 inch TFT Display Video: VGA(640x480) Still photo: 300K Pixels(640x480) Automatic Automatic Video(AVI), Photo(JPG) SD/MMC/SDHC card(max. 16GB) USB2.