X4 1
X4 FCC part 15.21 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC part 15.105 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of FCC RF Rules.
Busy light 5 Power key 6 OK key Direction keys: Up 7 Down Right/ LED switch Left/ Self timer 8 Mode key 9 Battery lid 10 Speaker 11 Wrist strap loop 12 Wrist strap hole 13 Zoom in key 14 Zoom out key 15 USB/TV out port 16 LED light 17 Self timer light (red LED) 4
18 Tripod socket 19 SD card slot 20 LCD Screen Start to use NOTE: Please insert three fresh AAA batteries and SD/SDHC memory card to operate the camera 1. Installing Batteries 1. Open the battery lid 2. Insert three AAA alkaline batteries according to the terminals polarity location. 3. Insert the front end of the battery lid into the battery latch, press the back end of the battery lid and then press the lid securely closing the battery compartment. 2.
Set this slider to “non-LOCK” position before inserting and taking video or still images. 1. Push the SD card into the slot until it is completely inserted. 2. To remove / replace the card, lightly press inserted card and camera will eject the card. 3. The SD card has to be formatted first: Press OK button and then press Right Direction key to enter Setup Menu. Press Up and Down Direction key to select ‘Format’ option. Press Right Direction key and then press Up or Down Direction key to select ‘Yes’ option.
from the camera 2. Macro setting is suitable for shooting close-up subjects 1.2” – 2”away. 4. Power ON / OFF the camera 1. Power ON: press the Power key for a second or two to turn the camera ON. 2. Power OFF: press the Power key (when the camera is active) to turn the power OFF. Auto Power OFF: When camera has been left idle for 1 minute, the camera will turn OFF automatically. The automatic power OFF delay time can be set at 1, 3 or 5 minutes.
6. Setting Date and Time: Press OK button. Then press Right Direction key to enter Setup Menu. Press Up and Down Direction key to select ‘Date & Time’ option. Then press Right Direction key and the current system date and time are displayed on the LCD screen. To change the date and time, use the Direction key: Up or Down to adjust, Right key to move the cursor, OK button to confirm, then OK button to Exit setup mode. To leave the date and time unaltered, press Left key and then OK key to Exit setup mode.
Preview mode Video resolution; it can be selected at 640x480 or 320x240 Video Recording Icon The remaining time for recorded Video; ex 1 minute 8 seconds left Zoom ratio range SD card icon; card inserted Battery icon The LED Lamp is turned ON Recording the Video clip 1. Open the LCD screen. 2. Press / hold the Power key and turn the camera ON 3. Press the Shutter key to start recording video 4. To stop recording, press the Shutter key again.
NOTE: Please note that recorded video and images appear slightly narrower on camera LCD screen than actual recorded scene. • The LCD screen acts as a viewfinder to help you more accurately point at and center the main subject or person while recording. Changing the resolution setting of video 1. 2. 3. 4. 5. 9. Press OK button to open the menu. Press Up or Down Direction key to select ‘Movie Size’ option. Press Right Direction key.
Image counter Camera Mode icon Zoom ratio range SD card icon; card inserted 10 Self timer counter; photo Will be taken after 10 sec Battery icon LED light icon Shooting 1. Press / hold the Power key to turn the camera ON 2. Press the Mode key once to select the Camera mode. 3. Press the Shutter key to take a still picture NOTE: Please note that recorded video and images appear narrower on camera LCD screen than actual recorded scene.
Changing the resolution setting of photo 1. 2. 3. 4. 5. Press OK button to open the menu. Press Up or Down Direction key to select ‘Resolution’ option. Press Right Direction key. Press Up or Down Direction key to select the required resolution setting: VGA (640 x 480) or other option shown. Press OK button to confirm the selection. Then press OK button to exit the menu. Self Timer There are two methods to set Self Timer mode: Method 1: Press OK button to open the menu.
To delete self timer mode setting, press Left Direction key once. Continuously taking three photos: Press OK button to open the menu then select ‘Driver Mode’. Press Up or Down Direction key to select ‘Burst’ option on the menu and then press OK button to confirm the selection. Press OK button again to exit the menu. A Burst mode icon will appear on LCD screen. Press Shutter key and camera will take three photos continuously. To delete Burst mode setting, press Left Direction key once.
Playback Video Photo You can view still images or video by pressing direction key Left or Right and for a video file just press the shutter key to play it. You can also zoom in or zoom out of the viewed photo by pressing zoom key. By pressing Left or Right Direction key after zooming in, the camera will enter into pan mode to view the image. To resume normal preview mode, press OK button.
Start-up Image: You can select one photo taken and set it as the Start-up Image of the camera. NOTE: • When video file is previewed, only Lock and Delete options in the menu are active. • Please note that recorded video and images appear narrower on camera LCD screen than actual recorded scene. • All recorded images and video will be displayed full frame and show real image size when played back on computer monitor and TV screen.
Note: • • • • : This icon indicates recorded Video (AVI file) : This icon indicates still picture (JPG file) with added voice Memo. : No icon is displayed on still pictures. In PLAYBACK mode, press Zoom Out Key (adjacent to LCD screen) selecting the “thumbnail” format. Press UP, DOWN, LEFT or RIGHT buttons to browse through images, then press OK (center button) to select image for an instant review. Press Zoom In Key to enlarge and view image in full resolution.
to stop playing. Add voice memo on photo file 1. Switch the camera to playback mode. 2. Browse to the photo you wish to add voice memo. 3. Press OK button and select ‘Voice Memo’ option by pressing Up or Down Direction key. 4. Press Right Direction key and a sub-menu appears on LCD screen. 5. Select ‘Add’ Option and then press OK button to confirm. 6. Counter appears on LCD screen. The camera is now ready to record voice memo.
1 Playback mode icon 2 Image counter 3 Voice Memo indicator 4 PHOTO file indicator 5 Playing time 6 Control panel for playing voice memo Note: 1 The files stored in card will be lost during formatting operation, please backup all important memories or data before formatting the memory card. 2 The “My image” menu can be activated after you have set “Start-up Image” function. 11. Setup the camera 1. Press OK button then press Right Direction key to enter Setup Menu. 2.
adapts to match power supply and indoor fluorescent lamp at 50Hz or 60Hz. Power Save: You may make the power turn off in 1 minute, 3 minutes or 5 minutes. Date & Time: Set up the date and time (see Section 6: Setting Date and Time). Language: Change the menu to a different language. TV Out: Change the TV output format to suit PAL or NTSC television system. Start-up Image: Disable the start-up image, reset the default start-up manual or use the image you select to be the start-up image.
12. Press the Power key to turn on the camera. The photo you select will display on LCD screen as the start-up image. To Disable the start-up image, select the ‘Start-up Ima’ option in the Setup Menu and then select ‘Off’ option. After turning the camera off and on again, the start-up screen will be blank. To reset the start-up image to default setting, select the ‘Start-up Ima’ option in the Setup Menu and then select ‘System’ option.
TV Output 1. Plug in TV cable: Insert the single-connector to camcorder. Connect the end with double-connectors to video (yellow) and to audio (red or white) input jack on TV. 2. Turn on TV and camcorder. 3. Switch mode on TV to select video input (see your TV manual for instructions). Uploading your video clips to YouTube Install the ArcSoft MediaImpression program to gain easy YouTube access. 1. Install the ArcSoft MediaImpression program Insert the CD-ROM into the computer CD-ROM drive.
(If the screen does not appear as the auto-run, please click on SoftwareInstaller.exe under the CD-ROM drive icon on the computer.
After installation, please restart the computer.
Double click the icon on the desktop or follow “Start → Programs” to open: MediaImpression After starting MediaImpression, click “Import” to import the media.
Choose the video camera storage and choose the output location. Choose require file and click the import, selected file will be stored in the output location.
Click “Go to start page” to return the main screen, click the “Video” or “All media” to use the “YouTube” function. Choose file and click the “upload to YouTube”.
Enter your username and password to login to YouTube, execute upload.
Video resolution VGA: 640x480(30fps), QVGA: 320×240(30fps) Picture resolution 640×480 (default) Lens F3.1 f=6.5mm Focus settings Digital zoom 2.5cm~5cm (Macro) / 140cm~infinity (standard mode) 4× LCD display screen 1.
System requirements System Requirements Operating System Microsoft Windows ME, 2000, XP, Vista, 7 Central Processing unit Intel Pentium III 1GHz or CPU of equal or higher performance Memory 512 MB or higher Sound Card, Display Card The sound card and the display card shall support DirectX8 or higher version. CD Driver 4 times speed or above Hard Disk Available space 1 GB or more Other One standard USB 1.1 or USB 2.