SHUOYING DIGITAL SCIENCE&TECHNOLOGY(CHINA)Co.
Introduction Thank you for choosing this camera. The product adopts high-performance chip which can achieve HD video, motion graphics with strong continuity, support AVI video format, and take clear photograph. The product, with unique portable design, can be applied to various fields, and provide you convenient, safe and colorful life. Please carefully read this manual before using. Keep the manual in a safe place for future reference. The compilation of the user manual refers to the latest information.
or dust on the camera or lens, blow the sand or dust off the camera or lens. Do not use cloth to wipe, otherwise, the surface of camera or lens may be scratched. In case of cleaning the surface of camera lens, first blow the dust off the surface, use a cloth or paper available to optical equipment to wipe the lens gently. Use the professional camera cleanser to clean the lens. Do not use any organic solvent. Do not touch the lens surface by fingers.
The product adopts high-performance chip which can achieve HD video, motion graphics with strong continuity. The video recording is available even under low illumination. Support AVI video format. Support HD (1280x720),VGA (640x480) and QVGA (320 x 240) for recording. Sizes of 5M, 1M, VGA available for photographing. Support high-speed USB2.0. Support maximum 32G TF card.
Appearance and Keys Micro USB LCD screen Reset Indicator Micro SD Microphone Shutter/Confirm key Power/Mode key 5
Up key Tapped hole for tripod Lens Down key Menu key 6
Start to use 1. Charge the built-in lithium battery Charging indicator Connect the computer to USB port Connect the camera to computer for charging under shutdown status. The charging indicator will be on when charging, and will be off when the battery is fully charged. Generally, the battery can be fully charged after 2-4 hours.
2. How to use the memory card 2.1 Properly insert the TF card into the card holder as per the instructions indicated near the card holder. 2.2 To remove the TF card, press the end of memory card gently, the card will be ejected. Note:The camera is not equipped with built-in memory. Please insert memory card before using. 3. Startup and shutdown 3.1 Startup: press the POWER key for 3 seconds, the camera will show startup screen and enters into POWER ON state. 3.
4. Function modes switching The camera has 3 modes: photo mode, video mode, and playback mode. Press the power key to switch the modes after starting up. Photo mode: for taking photos. Video mode: for recording videos. Playback mode: for playing back the current photo or video. 5. Indicator light 5.1 BUSY indicator: When the camera is working (e.g. recording, photographing, auto screen off etc.), the indicator will be ON. 5.
7. Photo mode Press the Power key to switch to photo mode. Press the Shutter key under preview state can take one photo. 1. Photo mode 6. Available shooting count 2. White Balance mode 7. Icon of digital zoom 3. Metering mode 8. SD card inserted 4. Exposure mode 9. Battery state 5. Photo resolution 8. Playback mode 8.1 Press the Power key to switch to playback mode. Press the Up key or Down key under preview state to play the previous or next photo or video.
8.2 Press the Shutter key to play the video, and press the Shutter key again to stop play. 8.3 File operation: In playback mode, press MENU key to enter into the menu to lock, delete, slide show or rotate recorded files. Press the Up key or Down key to select the relevant menu item, then press Shutter key to confirm, or press MENU key to exit. As the following picture shows: 9. Menu mode 9.1 Press the MENU key when the camera is under idle state to enter into the menu of relevant mode.
9.2 After entering the menu mode, short press the shutter key to switch between the shooting mode and setup mode.Press Up key or Down key to select the menu items.Press Shutter key to confirm the selection.Press MENU key to cancel the selection or exit from the menu. Application on PC The camera has Plug and Play function. Use a USB cable to connect the camera to PC under Power On state to switch to removable hard disk mode. The icon of removable hard disk will be indicated in the window of “My Computer”.
the installation window, please run “Windows Resource Manager”, and select and run “SoftwareInstaller.exe” under CD/DVD-ROM drive) Driver installation: Click “Install Driver” in the installation guide window, and finish the installation step by step as per the instructions. Restart the computer after finishing the driver installation.
Application software MAGIX Video easy SE / MAGIX Photo Manager 9: Please click the button on the guide window, and finish the installation step by step as per the instructions.Please click the “Software operation explanation” button on the guide window to check the operating method. Use as Computer Camera After connecting the camera to computer, press the shutter key to enter Camera mode. Before using the camera function, please check whether the computer has been installed with camera driver.
added in “Start→All Programs”. Click the shortcut icon to open the AMCAP window which will show the video shot by the camera. When the AMCAP software is not activated, the camera function can also be used for transmitting video via network. Ensure the Preview item in Option menu is selected.
Technical Parameters Image sensor 0.3 Mega Pixels CMOS Sensor Function mode Video, photo, playback Lens F1.05, f=4.1mm Digital zoom 4X Shutter Electronic shutter LCD display 2.0 inch LCD Photo resolution 5M(2592×1944),1M (1280×1024), VGA (640 x480) Video resolution HD(1280x720, 15 frame/sec), VGA(640x480,30 frame/sec), QVGA(320 x 240, 30 frame/sec) White balance Auto/Daylight/Cloudy/Fluorescent/Tungsten Exposure Storage medium -2.0 ~ +2.
could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Consult the dealer or an experienced radio/TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.